Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Packaging and printing · Testing instruments

Moisture meter supplier in Bangladesh

Need a moisture meter supplier in Bangladesh? Tell Roptan the materials you test, from board, paper and wood pallets to PET resin or grain, and how you check results. We source from verified sellers, check calibration for your material and deliver with training by the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get moisture meters sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying moisture meters in Bangladesh

A moisture meter gives the percentage of water in a material in seconds, without drying it, by reading a property that tracks water, such as electrical resistance or dielectric constant. Carton plants and paper mills check incoming board and reels with it, exporters check wood pallets and crates, PET plants check resin, and rice and seed mills use grain meters.

Meters sold here are mostly imported, and local traders often stock handheld models. Roptan acts as your moisture meter supplier in Bangladesh: we help you choose a meter calibrated for your material, compare offers from verified sellers, and check readings against an oven-dry test before you accept. You deal with Roptan only.

Kinds of moisture meter

Pin meters

Two electrodes go into the material and read electrical resistance; more water means more conductance. Choose them for wood pallets, timber and crates, where small holes do not matter.

Pinless meters

Pads pressed on the surface read dielectric properties and leave no mark. Choose them for paper reels, cartons and finished board where holes are not acceptable.

Halogen moisture analysers

A lab unit weighs a sample, heats it and plots the drying curve in minutes. It measures loss on drying, which counts any volatile matter, and suits resin, powder and paper samples.

Karl Fischer titrators

Detect only water, for trace moisture in plastics and powders, where loss on drying is not specific enough.

Grain and seed meters

A class of their own, covered by OIML R 59 for cereal grains and oilseeds. Choose one for a rice or seed mill; it is not a board meter.

How to specify a moisture meter

Material first
Meters are calibrated per material. Name each one: corrugated board, paper reels, the wood species of your pallets, PET resin or grain.
Calibration curves
On non-wood materials a reading is relative unless the meter is calibrated for that material. Ask for material curves or correction tables, with species and temperature for wood.
Range for board
Corrugated board usually holds 6.5 to 9.5 per cent moisture; drier board cracks and damper board loses compression strength. The meter must read that narrow band reliably.
Pallet limits
Wood in a humid store settles near the moisture of the surrounding air, so agree a pallet acceptance limit with your buyer rather than borrowing a figure.
Resin samples
Damp PET resin hydrolyses in processing, losing molecular weight and turning brittle. A lab analyser on resin and preform samples protects bottle quality.
Probe and data
Choose the probe style, such as hammer, deep-wall or surface pad, and say whether you need data logging and software for audit records.

Reference methods for checking a moisture meter

ISO 287
Moisture content of a lot of paper and board by oven drying, including corrugated and solid board. Check meter readings on board against it.
EN 13183-1, -2 and -3
For sawn timber: Part 1 is the oven-dry reference, Parts 2 and 3 the resistance and capacitance meter methods, which estimate moisture without cutting.
ASTM D4444
Calibration of hand-held moisture meters against direct measurement by ASTM D4442. ASTM notes that meters of different types may not read the same.
OIML R 59 and ISO 712-1
OIML R 59 covers grain and oilseed meters. The cereal reference method is now ISO 712-1:2024, which replaced ISO 712, though vendor pages still cite the old number.

What moves the price of a moisture meter

  • Type: a basic pin meter sits at the low end and a halogen analyser far higher.
  • Measuring range and resolution, and how many material or species curves are built in.
  • Probe style, such as hammer, deep-wall or surface probes.
  • Data logging and software for stored readings.
  • A calibration certificate supplied with the meter.

Lead times and delivery

No delivery time is published for Bangladesh. Handheld meters are small and local traders often stock them, which shortens the wait; a lab analyser or grain meter may have to be imported. Minimums are usually one piece for analysers and grain meters, but some basic handheld meters carry higher minimums. Roptan confirms the dates and the minimum in the quote.

Handheld meters arrive ready to use; the seller sets the material curves and shows your staff how to read board, reels and pallets. An analyser is set up on a stable bench and checked with a reference sample. You receive the VAT invoice (Mushak 6.3), any calibration certificate, the manual and the warranty in writing.

What we check for this order

  • Oven-dry comparisonReadings on your own samples are compared with an oven-dry result: ISO 287 for board, EN 13183-1 for timber.
  • Repeat readingsThe meter is read at several points on the same sample, and the readings must agree with each other.
  • Known samplesWe check it reads sensibly on a known-dry sample and on a conditioned one before acceptance.
  • Certificate and labWe ask whether the seller can give a traceable certificate and which accredited lab issued it.

Questions buyers ask

Why do two meters give different readings on the same board?

Meters of different types may not read the same under the same conditions, as ASTM notes, and a meter not calibrated for board gives a relative figure. Some are set for wood and report a wood moisture equivalent. Check both against an oven-dry test to ISO 287 and use that as the reference.

What moisture should corrugated board have?

Usually about 6.5 to 9.5 per cent. Below that the board tends to crack; above it, compression strength falls. In the monsoon, check incoming reels and finished board often, and store them where humidity is controlled, because paper and board take up moisture from damp air.

Can one meter test board, pallets and grain?

Not well. Each material needs its own calibration, and grain meters are a separate class under OIML R 59. A carton plant might pair a pinless meter for board with a pin meter for pallets, while a rice mill needs a grain meter. Tell us every material and we match meters to them.

Is there a legal moisture limit for wood pallets in Bangladesh?

We have not found one. Wood in a humid climate settles near the moisture of the surrounding air, so a pallet in a monsoon-damp store reads higher than kiln-dried timber. Agree the limit with your buyer in writing and measure it with a pin meter calibrated for the species.

How soon will I hear back about testing instruments?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other testing instrument products

Each product type has its own page as it is published; until then its card opens the category form.

All testing instruments