Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Packaging and printing · Testing instruments

Drop tester supplier in Bangladesh

Looking for a drop tester supplier in Bangladesh? Tell Roptan your heaviest packed carton, its size and the procedure your buyer names. We source the rig from verified sellers, check the height scale and release, and arrange installation and training through the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get drop testers sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying drop testers in Bangladesh

A packaging drop tester lifts a loaded carton to a set height and releases it onto a face, edge or corner, the same way every time. It shows whether the carton and its inner packing protect the contents from the shock of a fall, and lets you compare pack designs. Exporters, and the carton plants that supply them, use it when a buyer asks for transit tests.

These rigs are mostly imported, so a drop tester supplier in Bangladesh usually sells machines made abroad. Roptan matches the rig to your heaviest pack and your buyer's procedure, compares offers from verified sellers, and has the seller install it and train your staff. You deal with Roptan only.

Kinds of drop tester

Free-fall carton drop testers

The main kind: a twin-flap platform drops away under the carton when released, from an adjustable height. Arms and holders set the box for face, edge or corner drops.

Manual and powered release

A lever releases the platform on basic models; pneumatic release is offered on others. Choose powered release when several operators must get the same drop.

Zero-drop testers

A single arm lifts the package and releases it with little disturbance, so the drop orientation is controlled. Choose one when a buyer specifies exact edge or corner impacts.

Bottle drop set-ups

Water-filled blow-moulded containers are tested under ASTM D2463 on a bottle drop set-up, not a carton platform. Order one separately if you also make bottles.

Other impact machines

Incline impact, horizontal impact and shock machines run other methods, such as ASTM D880 and ASTM D5487. A drop tester does not replace them.

How to specify a drop tester

Packed weight and size
Give the heaviest packed weight and the largest carton. One bench model takes up to 50 kg on a 465 x 445 mm table.
Heights and orientations
State the drop heights your buyer's procedure uses and whether you need face, edge and corner drops. Ask for the height scale's least count.
Release mechanism
Manual lever or pneumatic. Ask how the platform clears the carton, so it falls without snagging, and whether the flaps can be sized to your cartons.
Impact surface
State the surface the carton must land on, as your procedure describes it, and make sure the quote includes it.
Heavy or bulky loads
ASTM D5276 notes that containers too heavy or bulky to handle by hand are better tested by other methods, such as ASTM D880. Ask before buying a free-fall rig for them.
Site
The frame needs about 950 x 600 mm of floor but stands taller than its highest drop height. Check ceiling height, floor loading and how heavy cartons reach the platform.

Drop test procedures

ASTM D5276
Drop test of loaded containers by free fall, with the container loaded as for shipment. For containers up to 50 kg, ASTM states it fulfils the matching ISO drop tests.
ISTA 1A and 2A
ISTA 1A is an integrity test and 2A a partial simulation, both for packaged products of 68 kg or less. ISTA calls both series screening tests.
ASTM D4169
A practice for performance testing of shipping containers and systems: drops and other tests run in a set order on the same containers.

What moves the price of a drop tester

  • Maximum drop height and the packed weight the rig is built to take.
  • Platform size and frame strength for larger, heavier cartons.
  • Release type: a manual lever against pneumatic release.
  • Face, edge and corner capability, the impact surface and a digital height readout.
  • Custom set-up for a named ISTA procedure, which some sellers offer on request.

Lead times and delivery

No delivery time or firm minimum is published for Bangladesh. The time depends on whether a trader holds the model, the height and weight range, the release type, any custom set-up for your buyer's procedure, and freight and customs clearance. Roptan confirms the dates and the minimum in the quote.

The seller assembles the frame, sets it level, checks the height scale and the release, and trains your staff on a full drop sequence with your own packed cartons. Plan how heavy loaded cartons will reach the platform. You receive the VAT invoice (Mushak 6.3), any height check report, the manual and the warranty in writing.

What we check for this order

  • Drops at the top heightThe seller drops a sample carton from the highest rated height on each orientation: face, edge and corner.
  • Clean releaseWe check the carton lands as released, with no snagging on the flaps and no sideways kick.
  • Height scaleThe height scale reading is checked against a measuring tape before the rig is accepted.
  • Weight and size fitThe quoted rig's table and weight limit must take your heaviest packed carton with room to spare.

Questions buyers ask

Should we drop empty or packed cartons?

Packed. ASTM D5276 tests the container loaded as for shipment, because an empty carton shows nothing about whether the product inside survives. Pack the carton exactly as it will ship, with the same inner packing, before you run the drops your buyer's procedure lists.

Does passing ISTA 1A mean our goods will arrive undamaged?

No. ISTA calls its 1-series and 2-series tests screening tests, and says 2-series results are not meant to predict shipping performance. A pass is a benchmark your buyer recognises, not a promise about field damage. For a closer simulation, ask whether your buyer wants a 3-series test or ASTM D4169.

What drop heights should we use?

The heights your buyer's procedure sets. ISTA and ASTM sell their procedure documents, so get the current version from your buyer or buy it, rather than relying on figures copied from elsewhere. Then check that the rig you order covers every height and orientation in it.

Can one rig test cartons and plastic bottles?

Not usually. A carton rig drops a pack from a platform. Water-filled blow-moulded containers are tested under ASTM D2463, which uses its own bottle drop set-up and has no ISO equivalent. If you make both, plan two set-ups and tell us which tests each one must run.

How soon will I hear back about testing instruments?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other testing instrument products

Each product type has its own page as it is published; until then its card opens the category form.

All testing instruments