Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Packaging and printing · Testing instruments

Bottle burst tester supplier in Bangladesh

Need a bottle burst tester supplier in Bangladesh? Tell Roptan your bottle sizes and neck finishes, the pressures in your customer's specification and the data you need. We source from verified sellers, check the gauge calibration and arrange installation and training through the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get bottle burst testers sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying bottle burst testers in Bangladesh

A bottle burst tester seals a bottle in a chamber and raises its internal pressure, with water for carbonated drink bottles, until the bottle fails or holds a set pressure for a set time, and records that pressure. PET bottle and preform makers and carbonated drink bottlers use it as a pass or fail check and to see how much margin a bottle design has.

These testers are imported, usually from India or China. Roptan acts as your bottle burst tester supplier in Bangladesh: we help you choose the modes, holders and data output, compare offers from verified sellers, check which method each quote cites, and have the seller install the tester and train your staff. You deal with Roptan only.

Kinds of bottle burst tester

Ramp testers for PET and plastic bottles

Raise internal pressure in a defined way until the bottle bursts and record the burst value. Choose one for carbonated PET bottles and for design trials.

Pressure-hold (proof) testers

Apply a set pressure and hold it for a set time; the bottle passes if it holds. Some machines offer both proof and ramp modes, which is worth asking for.

Testers with volume expansion

Measure how much the bottle swells under pressure, which shows creep and weak spots before failure. An option on some machines, beyond a plain peak-pressure reading.

Glass-container pressure testers

Built for glass bottles and glass methods such as ISO 7458. Choose one only for glass; it is a different instrument from a PET tester.

Seal burst testers for pouches

Pressurise flexible packs and pouches to test their seals. Buyers sometimes confuse them with bottle testers, but they do not test bottles.

What to tell a bottle burst tester supplier in Bangladesh

Test pressure
Take the working and burst pressures from your bottler's specification, in bar or kPa. The machine's range must exceed the highest burst value you expect, with margin.
Bottle sizes and neck finish
List every bottle height and neck finish. They decide the holder and chamber, and the neck must seal without slipping or losing pressure.
Test modes
Ask for proof (hold) and ramp (to burst) modes, with a timer for the hold, the rate of pressure rise your specification sets, and a stored record of the failure pressure.
Data
State whether you need USB export or software records with dates and bottle IDs; some models add a self-calibration function.
Safety
The tester breaks bottles under pressure, so ask for a closed, shielded chamber and an end-of-test alert.
The rest of the QC set
A burst tester is one machine of a PET quality set. Torque, top-load and polariscope testers are sold separately, so plan the whole set at once.

Specifications, methods and calibration

The bottler's specification
For carbonated PET bottles the test pressure usually comes from the bottler's or brand owner's specification. Write the working and burst pressures and the mode into the order.
ASTM C147 and ISO 7458
Both are glass-container methods. Some vendors cite C147 for PET bottle testers; treat that as a warning sign and ask which method the machine follows.
ASTM D2659 and ASTM D2463
Top-load and drop impact methods for blown plastic containers. They sit beside the burst test and need their own fixtures or machines.
ISO/IEC 17025 certificate
Ask which accredited lab issued the pressure gauge certificate. Pressure is a different scope from force, so check the lab's scope covers it.

What moves the price of a bottle burst tester

  • Pressure range and the size of the test chamber.
  • Control: pneumatic pressure control and touch-screen programming against simpler manual control.
  • Data: graphs, stored results and software export.
  • A holder for each neck finish, and volume expansion measurement if you add it.

Lead times and delivery

No delivery time is published for Bangladesh. The machines are imported to order unless a trader holds your model. Extra stations, holders for unusual neck finishes, volume expansion and calibration before dispatch can add time, as do freight and customs clearance. The minimum is usually one set. Roptan confirms the dates and the minimum in the quote.

The seller installs the tester on a bench near the blowing or filling line, connects air and water where the model needs them, checks the gauge and runs bottles from your own line. You receive the VAT invoice (Mushak 6.3), the gauge calibration certificate, the manual, a holder for each neck finish and the warranty in writing.

What we check for this order

  • A ramp on your bottlesThe seller runs a pressure ramp on bottles from your own line and shows you the recorded burst value.
  • Holder fitEach holder must seal your neck finishes without slipping or leaking before the order is accepted.
  • Gauge certificateWe check the pressure gauge certificate, which accredited lab issued it and that its scope covers pressure.
  • Method in the quoteWe check that a quote for a PET tester does not rest on a glass method such as ASTM C147.

Questions buyers ask

What pressure should a carbonated PET bottle withstand?

There is no single figure. Burst pressure depends on the bottle design, the resin and the bottler's specification. Ask your bottler or brand owner for the working and burst pressures they require, write them into the order, and choose a tester whose range sits above the highest burst value with margin.

Is there an ISO or ASTM method for PET bottle burst testing?

We have not found one we can point you to for carbonated PET bottles. In practice plants test to the bottler's or brand owner's specification. Be wary of quotes that cite ASTM C147 or ISO 7458 for a PET tester: both are glass-container methods.

Should the tester use water or air?

Water for carbonated drink bottles, as vendor guides describe; air is used for other purposes. Whichever medium the model uses, ask for a closed, shielded chamber, because the bottle breaks under pressure at the end of a ramp test.

What other tests sit beside the burst test?

Top-load (column crush) under ASTM D2659, drop impact of water-filled containers under ASTM D2463, and torque checks on closures. Preform makers also use a polariscope. Each needs its own fixture or machine, so list them all when you ask for quotes.

How soon will I hear back about testing instruments?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other testing instrument products

Each product type has its own page as it is published; until then its card opens the category form.

All testing instruments