Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Pumps

Submersible pump supplier in Bangladesh

Roptan is a submersible pump supplier in Bangladesh for deep tube wells, drainage sumps and sewage pits. Tell us the bore, the pumping level and the flow: we source from verified sellers, check seal and motor protection, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get submersible pumps sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying submersible pumps in Bangladesh

A submersible pump runs fully under the liquid, with a sealed motor close-coupled to the pump end. Borehole models are lowered down a tube well to lift groundwater; single-stage models sit in a sump, basement or pit to clear drainage, sewage or site water. Buyers include building owners, factories, farms and treatment plants.

When you choose a submersible pump supplier in Bangladesh, ask about the seal, the cable entry and the motor protection as well as the curve. Roptan takes your well or sump data, sources from verified sellers, checks the seal arrangement, cable and protection against your supply, and delivers. The seller lowers or sets the pump and commissions it.

Kinds of submersible pump

Borehole pumps

Multistage pumps lowered down a tube well, each stage an impeller and a diffuser, with the motor below the pump end. They are classed by the smallest casing they fit, typically 4 to 12 inches.

Drainage pumps

Single-stage pumps for sumps, basements and pits that collect rain or groundwater. Choose one for clear or slightly dirty water, with level controls that stop it in time.

Sewage pumps

Built for raw sewage, with a vortex, solids-handling or chopper impeller chosen by what the sewage carries. Cast or ductile iron usually suits ordinary sanitary sewage.

Dewatering pumps

Open clearances and a suction strainer let them pass site water and light slurry, at some cost in efficiency. Choose one for excavations, construction sites and flooded basements.

What a submersible pump supplier in Bangladesh needs to know

Well data
Bore or casing diameter, total depth, setting depth and the dry-season pumping level. Pump length and head follow from these, so size for the lowest level you expect.
Flow and head
The flow you need and the head from the pumping level to the tank or plant, with pipe friction, so the duty falls inside the pump's preferred operating region.
Water quality
Arsenic and salt can be problems in groundwater in parts of Bangladesh. Test the well water as a separate step; chlorides in salty water also decide the wetted materials.
Sump and starts
For drainage and sewage, give the sump size and the inflow. A sump sized so the pump usually starts fewer than 10 times an hour lets the windings cool between starts.
Liquid and temperature
Say whether it is clean water, drainage, sewage or water with sand, and how hot it is. If methane can build up in the pit, the motor must be explosion-proof.
Supply and cable
State three phase or single phase at 50 Hz and the cable run. The cable must hold enough voltage at the motor, and line-to-line current imbalance should usually stay within 5 percent.

Standards and tests for submersible pumps

ISO 9906:2012
Hydraulic acceptance tests for rotodynamic pumps, submersibles included, in grades 1, 2 and 3. Ask which grade the test certificate states.
IEC 60335-2-41
Safety requirements for household and similar electric pumps, now in its 2024 edition. Usually the one to ask for on small pumps for homes and small buildings.
EN 809
Common safety requirements for pumps and pump units for liquids, the safety basis for pumps of European origin.
IEC 60034-30-1:2025
Motor efficiency classes IE1 to IE4. Ask which class the submersible motor meets and how it was tested.

What moves the price of a submersible pump

  • Duty: flow, head and motor kW; a deeper pumping level means more stages and a longer pump.
  • Materials: cast or ductile iron for ordinary water and sewage; stainless steel or high-chrome iron cost more.
  • Seals and sensors: a double mechanical seal with silicon carbide faces, plus thermal and moisture sensors.
  • Cable: the length and size needed to hold voltage at the motor on a deep setting.
  • Motor: an explosion-proof motor, a higher temperature rating or a rating for variable speed duty.

Lead times and delivery

Common borehole and drainage sizes from stock move faster than a pump built to a duty. Many stages, a large or explosion-proof motor, stainless or high-chrome parts, or a long special cable usually add time, as does import to order. Roptan confirms the delivery date and any minimum order in the quote.

Roptan delivers to sites across Bangladesh. For a borehole pump, the seller joins the cable to the motor lead, lowers the pump on its riser pipe to the agreed depth and records the setting. For a sump, it sets the pump and its level controls. Commissioning covers rotation, flow and head, current on each phase and protection settings. Handover includes the curve, test certificate, setting record, warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Seal arrangementWe check the offer names a double mechanical seal, usually with silicon carbide against silicon carbide on the lower seal.
  • Cable entryWe check the cable entry has a barrier or a separate terminal block, so water cannot travel up the cable into the motor.
  • Duty at the lowest levelWe check the duty at your lowest expected pumping level still falls inside the pump's preferred operating region.
  • Protection and cable sizeWe check the protection settings follow the motor maker's limits and the cable size holds voltage at the motor.

Questions buyers ask

Why does my borehole pump keep tripping or burning out?

Usually the supply or the cooling. Unbalanced current between phases, low voltage at the motor from an undersized cable, and too little water flowing past the motor all overheat the windings. Ask for protection that trips quickly on overcurrent and a cable sized for the setting depth.

Can one pump handle both drainage and sewage?

Not well. Drainage pumps are made for clear or slightly dirty water. Sewage pumps use vortex, solids-handling or chopper impellers that pass the solids sewage carries. Tell us what reaches the pit and we match the impeller type to it.

Do I need a stainless steel submersible?

Usually not for ordinary water or sanitary sewage, where cast or ductile iron is adequate. Stainless steel pays where the liquid is highly acidic, and high-chrome iron impellers last longer with sand or grit. Salty water calls for materials that resist chloride corrosion.

Why should a drainage pump not run half out of the water?

Many drainage pumps have air-filled motors that shed heat into the liquid around them, and borehole motors are cooled by the water flowing past. Run partly exposed, a motor can overheat. Set the stop level so it stays covered.

How soon will I hear back about pumps?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other pump products

Each product type has its own page as it is published; until then its card opens the category form.

All pumps