Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Pumps

Booster pump set supplier in Bangladesh

Roptan is a booster pump set supplier in Bangladesh for apartments, hotels, hospitals and factories. Tell us the building height, peak flow and supply: we source constant or variable speed sets from verified sellers, check the controller and pump staging, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get booster pump sets sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying booster pump sets in Bangladesh

A booster pump set raises water pressure so the upper floors of a building get a steady flow. It is usually two or more pumps on one skid with a pressure sensor, a control panel and, on variable speed sets, inverters that set the motor speed. Buyers in Bangladesh include developers, apartment owners, hotels, hospitals and factories that draw from a ground or underground tank.

A booster pump set supplier in Bangladesh should size the set to your daily low flow as well as the peak, since an oversized set runs inefficiently most of the day. Roptan takes your building data, sources sets from verified sellers, compares their curves at minimum, normal and peak flow, checks the controller and delivers. The seller installs and commissions the set.

Kinds of booster pump set

Constant speed sets

Pumps start on a low-pressure switch and stop on a high-pressure switch. Simple, but they cycle often under heavy use, so a pressure vessel in the line is usually added to cut the starts.

Variable speed sets

Pressure feedback sets the motor speed, so the set holds pressure as demand changes. Choose one where demand swings through the day, as in apartments and hotels.

Duplex sets

Two pumps that alternate as lead and standby, spreading run hours between them. Choose one for smaller buildings where one pump can carry the peak.

Multipump sets

Three or more pumps staged by demand, so each runs nearer its efficient region and water keeps flowing when one is out for service. Choose one for tall buildings and large sites.

Staged or zoned boosting

Tall buildings may need boosters in stages, or one booster at the highest pressure with pressure reducers on the floors. Your plumbing designer decides by height.

What a booster pump set supplier in Bangladesh needs from you

Peak and low flow
Give peak flow and the real daily low flow, not the peak alone. An oversized set runs inefficiently in normal use.
Head to the top fixture
Height to the highest outlet plus the pressure it needs, then friction, scale in old pipes and any backflow preventer, which all take pressure before the tap.
Suction side
Say whether the set draws from an underground tank, a ground tank or a mains line, with the lowest water level, so a low suction cut-out can be set.
Number of pumps
State duty and standby pumps. Staging pumps by demand keeps each nearer its efficient region than one large pump running alone.
Power and backup
Three phase at 50 Hz, with generator backup and an automatic transfer switch if water must keep flowing through load shedding or an outage.
Drives and cables
Ask how the drives limit harmonic distortion on the supply, usually with filters, and use inverter-duty motors or filters where motor cables run long.

Standards and tests for booster pump sets

ISO 9906:2012
Hydraulic acceptance tests in grades 1, 2 and 3, applied to each pump of the set. Ask for a certificate per pump, with the grade stated.
EN 809
Common safety requirements for pumps and pump units for liquids, the general safety standard for pump units of European origin.
IEC TS 60034-30-2:2021
Efficiency classes for variable speed AC motors. On a variable speed set, ask for the motor class under it; IEC 60034-30-1:2025 covers motors run direct on line.

What moves the price of a booster pump set

  • Number of pumps: duplex, triplex or more, and how many are standby.
  • Speed control: drives and pressure sensors cost more than pressure switches.
  • Pump size: flow and head per pump, and the stage count for tall buildings.
  • Controller functions: alternation, standby start on a trip, low suction cut-out and remote alarms.
  • The skid: pressure vessel, headers, valves, frame and any harmonic filters included.

Lead times and delivery

A set built from a seller's standard pumps and panel moves faster than one designed around a special duty. More pumps, larger motors, a drive on every pump, harmonic filters or a witnessed test usually add time, and so do pumps or drives imported to order. Roptan confirms the delivery date and any minimum order in the quote.

Roptan delivers the set to your site anywhere in Bangladesh. Where installation is in scope, the seller places the skid, connects the suction and discharge headers and the supply, sets the pressure and commissions the set. Commissioning should show alternation, standby start on a pump trip and pressure held through a flow change. Handover includes curves, test certificates, panel drawings, settings, warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Curves at three flowsWe check the seller shows curves at minimum, normal and peak flow, with each running pump inside its efficient region.
  • Staging logicWe check the controller adds and drops pumps by demand and alternates lead and lag to spread run hours.
  • Service without shutdownWe check isolation valves let one pump or drive be serviced while the rest keep water flowing.
  • Suction protectionWe check a low suction pressure cut-out is fitted and set, so the pumps stop before the tank runs dry.

Questions buyers ask

Why does pressure drop on the top floors at peak times?

Usually the set was sized for a lower peak, or losses were missed: friction, scale in old pipes and backflow preventers all take pressure before the top fixture. A new head calculation with those losses, and curves at peak flow, shows whether a larger set or a second stage is needed.

Is a variable speed booster worth it?

Usually, where demand varies through the day. Pump power falls roughly with the cube of speed, so one worked example gives about 25 percent of full power at 63 percent speed. A constant speed set holds pressure by switching pumps on and off instead.

Why two smaller pumps instead of one large one?

Because demand moves. In one municipal case study, a single pump stayed in its recommended range only 1 percent of the time, while two pumps sharing the load kept about 99 percent of runtime in range.

Do we need a pressure tank?

On a constant speed set, usually yes: a pressure vessel in the line cuts the number of pump starts under heavy use. A variable speed set holds pressure by changing speed, so ask the seller what vessel, if any, its controller needs.

How soon will I hear back about pumps?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other pump products

Each product type has its own page as it is published; until then its card opens the category form.

All pumps