Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Pumps

Dosing pump supplier in Bangladesh

Roptan is a dosing pump supplier in Bangladesh for ETPs, water treatment, boilers and cooling towers. Tell us the chemical, dose range and back pressure: we source diaphragm, piston or peristaltic pumps from verified sellers, check materials and controls, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get dosing pumps sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying dosing pumps in Bangladesh

A dosing pump, also called a metering pump, moves a set volume of liquid in a set time and holds that flow nearly constant as outlet pressure changes. It feeds chlorine, coagulant, acid and boiler chemicals into treatment plants, boilers and cooling towers. Buyers in Bangladesh include factories whose ETP effluent must meet the ECR 2023 discharge limits, water plants and boiler houses.

In treatment, a small error in dose can upset the process downstream, so a dosing pump supplier in Bangladesh has to match the pump to the chemical and the control loop, not only the flow. Roptan takes your chemical, dose range and signal, sources from verified sellers, checks materials, valves and controls, and delivers. The seller installs, calibrates and commissions the pump.

Kinds of dosing pump

Mechanical diaphragm pumps

A motor drives a diaphragm that keeps the chemical sealed off from the drive, with check valves on each side. Choose one for toxic or corrosive chemicals in ETPs and water plants.

Hydraulic diaphragm pumps

The diaphragm is driven by hydraulic pressure, which suits high discharge pressures; the family reaches up to 1,200 bar, far above ETP or boiler duty. Choose one for high-pressure injection.

Piston pumps

A piston displaces the liquid directly, and capacity is set by stroke length or speed. Choose one for clean liquids that must be injected against higher pressure.

Peristaltic pumps

Rollers squeeze a flexible tube, so the liquid touches only the tube. Choose one for liquids with solids or a strong suction lift; at higher pressure the tube wears faster.

What a dosing pump supplier in Bangladesh needs from you

Dose range
Give minimum, normal and maximum flow in litres per hour, not just the maximum. Capacity is set by stroke length or speed, so the range decides the model.
Back pressure and suction
State the pressure at the injection point and the suction condition. Each model has a stated maximum discharge pressure.
Chemical and strength
Name the chemical, its strength and temperature, and send the safety data sheet. The head, valves and diaphragm must be compatible with it.
Viscosity
Thick liquids need a viscosity correction in sizing, or the pump ends up undersized. Diaphragm pumps suit low to medium viscosity.
Control signal
Say whether a 4 to 20 mA signal or dry contacts from a flow meter, pH or chlorine analyser will drive it, and list any output the plant needs back.
Gassing chemicals
Hypochlorite gives off gas in the pump head, which can cause vapour lock and lost prime. Ask for a fast-prime port with a vent valve and flow detection.
Relief and check valves
Fit a relief valve downstream if there is a stop valve in the line, and a correctly rated check valve to stop uncontrolled backflow.
Accuracy and turndown
State the accuracy you need at a set point and the turndown over which it must hold. Ask the seller to show measured delivery at the lowest and highest settings at your back pressure.

Standards, rules and papers for dosing pumps

API 675
The process-industry purchase specification for controlled volume pumps. It defines steady state accuracy, linearity and repeatability, usually quoted as 1 percent accuracy at a set point and 3 percent linearity and repeatability, with performance testing. Ask whether the pump is built and tested to it.
EN 809
Common safety requirements for pumps and pump units for liquids, the general safety standard for pump units of European origin.
ECR 2023 discharge standards
The Environment Conservation Rules 2023 set the effluent limits an ETP must meet, under the Department of Environment's clearance. Steady dosing helps hold the outlet within them.
Safety data sheet to GHS
Get the SDS from your chemical supplier and share it, so the pump seller can confirm the wetted materials against the chemical.

What moves the price of a dosing pump

  • Drive type: mechanical or hydraulic diaphragm, piston or peristaltic.
  • Flow and pressure: a higher back pressure or a wider dose range needs a larger head and drive.
  • Wetted materials: heads, valves and diaphragms for strong acids or hypochlorite usually cost more.
  • Controls: analogue and pulse inputs, flow detection and outputs to the plant's control system.
  • Accessories: relief and check valves, the injection fitting and a spares kit.

Lead times and delivery

Common models from a seller's stock move faster than a pump configured to order. Special head or diaphragm materials, a hydraulic diaphragm drive, extra control inputs or a pump imported to order usually add time. Roptan confirms the delivery date and any minimum order in the quote.

Roptan delivers to sites across Bangladesh. Where installation is in scope, the seller mounts the pump, connects suction, discharge, relief and check valves, wires the control signal and calibrates the pump with your chemical at the working back pressure, since factory calibration is done on water-like liquids. Handover includes the calibration record, wiring details, spares list, manual, warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Wetted materialsWe check the head, valves, diaphragm and seals are named on the quote and suit your chemical's safety data sheet.
  • Dose range at pressureWe check your minimum and maximum dose both fall inside the model's range at your back pressure.
  • Control inputsWe check the pump accepts the signal your flow meter or analyser sends, whether 4 to 20 mA or dry contacts.
  • Wear part namedWe check the seller names the wear part for your pump type, such as the diaphragm or the tube, and how long a replacement takes.

Questions buyers ask

Why does my hypochlorite dosing pump lose prime?

Usually gas. Hypochlorite gives off gas in the pump head, which causes vapour lock and lost prime. Ask for a fast-prime port with a vent valve, flow detection and stay-prime cycles.

Should I choose a diaphragm or a peristaltic pump?

Diaphragm for higher back pressure and for toxic or corrosive chemicals kept off the drive. Peristaltic for liquids with solids or a strong suction lift, with simple upkeep since the tube is the wear part. At higher pressure tube life falls, which is where diaphragm pumps take over.

Can the pump follow our pH or chlorine analyser?

Usually yes, if you specify it. Ask for a 4 to 20 mA input or dry contacts from the analyser or flow meter, and say whether the plant needs an output back from the pump. The input decides whether the dose follows flow, chemistry or both.

Why calibrate the pump on site?

Because factory calibration is done on water-like liquids. A chemical of different viscosity or density, at your back pressure, delivers a different volume per stroke. Ask the seller to calibrate with the real chemical at the real pressure during commissioning.

How soon will I hear back about pumps?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other pump products

Each product type has its own page as it is published; until then its card opens the category form.

All pumps