Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Measuring instruments and meters

Pressure gauge and transmitter supplier in Bangladesh

Send the medium, the pressure range and the connection to Roptan, your pressure gauge and transmitter supplier in Bangladesh. We source Bourdon, diaphragm and differential gauges and 4 to 20 mA transmitters from verified sellers, check them and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get pressure gauges and transmitters sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying pressure gauges and transmitters in Bangladesh

A pressure gauge shows pressure on a dial at the point of use; a transmitter turns it into a signal for a PLC, logger or remote display. In Bangladesh, boiler houses, pump rooms, compressor stations, water and effluent plants and process lines buy them to run equipment safely and to spot clogged filters.

A wrong range, reference or fitting can make a good gauge useless. A pressure gauge and transmitter supplier in Bangladesh should ask what sits next to it and what it reads. Tell us the medium, range, reference, connection and output. We source from verified sellers, check the dial, materials and certificate, and deliver.

Kinds of pressure gauge and transmitter

Bourdon tube gauges

A curved tube straightens as pressure rises and moves the pointer through gears. The standard mechanical gauge for pumps, compressors, boilers and pipework; it shows vacuum as reverse movement.

Liquid-filled gauges

A Bourdon gauge with its case filled with oil or glycerine, which damps the pointer. Choose one where the whole gauge vibrates, for example on a machine frame or a compressor.

Diaphragm and capsule gauges

Use a thin flexing membrane instead of a tube; EN 837-3 covers them. Welded capsules with a diaphragm on each side are often used for absolute pressure, and gauges for small pressures or pressure differences use a sealed bellows or membrane element.

Differential pressure gauges

Have two ports and show the difference directly. Choose one across a filter, where a rising difference shows clogging, or across a flow restriction.

Pressure transmitters

Turn the movement of a diaphragm or similar element into a signal, using strain gauges or capacitive cells. Choose one where a PLC, logger or remote display needs the reading, with a gauge beside it for local checks.

How to specify a pressure gauge or transmitter

Reference and units
Gauge, absolute or sealed gauge, with the unit: bar, kPa, MPa or psi. A vacuum reading is ambiguous unless you say whether it is negative gauge or absolute.
Range
Keep normal pressure well inside the scale. Makers of industrial gauges usually advise a steady pressure no higher than about three quarters of full scale, and less where it fluctuates.
Dial size and class
State both. A 100 mm dial in class 1 reads to about 1 percent of span; a smaller dial or lower class reads coarser.
What it sits next to
Pulses from a reciprocating pump wear the gears, so a restriction in the connecting pipe is often fitted; a vibrating gauge needs a liquid-filled case.
Connection and wetted parts
Thread type and size, bottom or back entry, and wetted material: brass, stainless steel or a diaphragm seal for sludge and chemicals.
Transmitter output
Usually 4 to 20 mA. The 4 mA live zero keeps a loop-powered device running at zero pressure, and readings below 3.8 or above 20.5 mA signal a fault.
Site and hazard
Outdoors in the monsoon, ask for IP65 or IP67 with sealed cable entries; in a hazardous area, state the zone.

Standards, tests and paperwork

EN 837-1 and EN 837-3
European standards for Bourdon tube gauges (Part 1) and diaphragm and capsule gauges (Part 3), covering metrology, requirements and testing. Ask which part and class the gauge meets.
IEC 61298-1
General methods for evaluating the performance of process measurement devices, the method a transmitter's performance test report may follow.
IEC 60079-0 and IEC 60079-14
Rules for equipment in explosive atmospheres and for its electrical installation. A transmitter for a hazardous zone needs the matching certificate.
BSTI schedule and calibration
The amended Weights and Measures Rules of May 2024 list pressure gauges, and BSTI's calibration fee schedule for gauges runs in ranges up to 1 GPa. Ask whether verification applies to your use.

What moves the price of a pressure gauge or transmitter

  • Type: a transmitter costs more than a mechanical gauge of the same range.
  • Dial and class: a larger dial and a tighter class raise the price.
  • Materials: stainless steel or special alloys cost more than brass; a diaphragm seal adds more.
  • Fill and range: glycerine fill, a high range or a high over-pressure rating add cost.
  • Output and certification: the output type and hazardous-area certification raise a transmitter's price.

Lead times and delivery

Lead times vary. Common gauges are catalogue items; transmitters with certificates, diaphragm seals and hazardous-area builds usually take longer, and an imported item adds sea freight and clearance at Chattogram. A calibration certificate adds its own turnaround. Roptan confirms dates and the minimum in the quote.

We deliver anywhere in Bangladesh. Gauges arrive with the class marked on the dial. For transmitters, the seller mounts the unit, wires the loop to your PLC and checks zero and span at the panel. You receive certificates, datasheets, warranty terms and a VAT invoice (Mushak 6.3).

What we check for this order

  • Range, units and classWe check the range, units and the class marked on the dial against your order.
  • Fitting and materialsWe check thread type and size, entry position, wetted material and fill before delivery.
  • Certificate pointsWe check the calibration certificate lists the test points across the range, not one value.
  • Paired boiler gaugesWhere two gauges go on one boiler, we check they read alike, since a mismatch is a known audit finding.

Questions buyers ask

What range should a boiler pressure gauge have?

Factory safety audits in Bangladesh have recommended a boiler gauge range of at least twice the maximum allowable working pressure in the boiler licence, or as a recognised standard sets. That is an audit finding, not a quote from the Boiler Act. Give us the boiler's licensed working pressure and we source gauges to match.

Should I fit a gauge or a transmitter?

A gauge where someone reads it at the point of use; a transmitter where a PLC, logger or alarm needs it. Many lines carry both: the transmitter for control and a gauge beside it for local checks against the signal.

Why does the gauge on my pump fail so quickly?

Usually pressure pulses from a reciprocating pump, which wear the gears. A restriction in the connecting pipe smooths the pulses and gives an average reading. If the whole gauge shakes, use a liquid-filled case. Tell us the pump type when you order.

How can a pressure gauge be checked?

Against a reference, such as a deadweight tester, which balances the pressure with known weights, or at a calibration laboratory, with points across the range on the certificate. On a boiler, compare the two steam gauges: they should agree.

How soon will I hear back about measuring instruments and meters?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other measuring instrument products

Each product type has its own page as it is published; until then its card opens the category form.

All measuring instruments and meters