Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Measuring instruments and meters

Level sensor supplier in Bangladesh

Tell Roptan, your level sensor supplier in Bangladesh, what the tank, sump or well holds and how deep it is. We source float switches, submersible probes, ultrasonic and radar sensors from verified sellers, check them against the liquid and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get level sensors sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying level sensors in Bangladesh

A level sensor tells you how full a tank, sump, well or silo is, at fixed points or continuously. In Bangladesh, water schemes, overhead and underground tanks, effluent plants, boiler feed tanks, generator fuel day tanks and process plants use them to run pumps, raise alarms and keep records.

Tank height is the least of it: foam, sludge, density, steam and chemistry decide which sensor works, and a level sensor supplier in Bangladesh should ask about all of them. Tell us the contents, vessel, range and signal. We source from verified sellers, check the datasheet against your conditions, and deliver.

Kinds of level sensor

Float switches

A float opens or closes a switch at one level. They work in many liquids, corrosives included, and are the usual choice for pump on-off in sumps and tanks once compatibility and specific gravity are checked.

Conductive probes

Detect a conductive liquid such as water at fixed points, for alarms and pump start-stop, not continuous level. For corrosive liquids, electrodes come in titanium or 316 stainless steel.

Submersible hydrostatic probes

Sit on the bottom and convert the pressure of the liquid column to depth using its density. They suit water in wells and reservoirs, with stainless steel, titanium or PTFE housings.

Ultrasonic sensors

Sit above the liquid and time an echo, so nothing touches it. Widely used in water treatment, but turbulence, foam, steam and chemical mist can distort or absorb the sound.

Radar level sensors

Work through vapour, dust and moist air and are largely unaffected by temperature, pressure or vibration. A non-contact radar can read through a plastic or glass window or vessel wall.

Solid-level switches for silos and bins

Vibrating probes and rotating paddles detect powder or granules at a set point in a silo or bin, for example to stop filling.

How to specify a level sensor

What the vessel holds
Liquid, solid or slurry, with temperature, pressure, chemistry and density, and whether it foams or is agitated.
Point or continuous
Point sensors switch at set levels; continuous sensors report the level all the time. Say which you need, or both.
Range and vessel
Give tank height and shape, nozzle positions and where the sensor can mount. For wells, give depth and bore size.
Density for hydrostatic probes
Depth is worked out from density, so give its range; sludge density varies, and each liquid needs its own setting.
Venting and cable
A submersible probe's cable carries a vent tube so air pressure does not corrupt the reading; the vent end must stay dry. Deep wells, from about 20 metres, use sealed-gauge probes.
Output
A 4 to 20 mA transmitter shows a broken wire as a fault, not as an empty tank. Say if you also need relay contacts for pumps.
Hazardous areas
For fuel or solvent tanks, state the zone and gas group, and ask for ATEX or IECEx marking to the IEC 60079 series.

Standards, tests and paperwork

IEC 60079-0 and IEC 60079-14
Rules for equipment in explosive atmospheres and for its electrical installation. Sellers show ATEX or IECEx marks; check the certificate covers your zone.
ISO 4266
A multi-part standard for automatic level and temperature measurement in petroleum storage tanks, which a fuel depot may be asked to meet for automatic tank gauges.
BSTI tank verification
BSTI's schedule, amended in May 2024, covers verification and calibration of storage tanks, tank lorries and dip rods. It does not name electronic level sensors.
Datasheet and test report
Ask for range, accuracy, wetted materials, enclosure rating and limits for foam, steam or build-up.

What moves the price of a level sensor

  • Principle: float switches and conductive probes usually cost less than ultrasonic, hydrostatic, radar or magnetostrictive sensors.
  • Range and accuracy: longer ranges and tighter accuracy raise the price.
  • Wetted materials: titanium or PTFE costs more than stainless steel.
  • Cable: a submersible probe for a deep well needs a long vented cable, which adds to the price.
  • Certification and output: hazardous-area certification, displays and extra outputs add cost.

Lead times and delivery

Lead times vary. Float switches and simple probes are usually catalogue items, while radar sensors, long-cable probes and hazardous-area units usually take longer, and imports add sea freight and clearance at Chattogram. Roptan confirms dates and the minimum in the quote.

We deliver anywhere in Bangladesh. Float switches and probes arrive with their cable and datasheet. For transmitters, the seller mounts the sensor, sets the empty and full points for your vessel, wires it to your pump panel or PLC and checks the reading. You receive the datasheet, test report, warranty terms and a VAT invoice (Mushak 6.3).

What we check for this order

  • Range against the vesselWe check the sensor's range against your tank height or well depth, with margin for mounting.
  • Wetted parts against the liquidWe check the wetted materials suit your liquid, and the float or probe suits its density.
  • Cable and ventFor submersible probes, we check the cable length and the vent or sealed-gauge arrangement against the depth.
  • Limits on the datasheetWe check the datasheet's limits for foam, steam, build-up and enclosure rating against your site.

Questions buyers ask

Which sensor suits an ETP equalisation or sludge tank?

Foam and solids rule out some kinds: an ultrasonic sensor can lose its echo in foam, while radar copes with vapour and moist air. For sludge and water heavy with solids, an air bubbler has no moving or electrical parts at the measuring point but needs a constant air supply.

How do I measure the water level in a deep tube well?

With a submersible hydrostatic probe lowered on its cable, which converts water pressure to depth. From about 20 metres, a sealed-gauge probe is usually used instead of a vented one. Give the well depth, bore size and the pump setting so the cable length and range fit.

Why does my submersible probe drift with the weather?

Usually the vent tube in its cable is blocked or wet, so changes in air pressure are read as level changes. Without that compensation, air pressure alone is about as much as a 10 metre water column. Keep the vent end of the cable dry.

Can a level sensor on a fuel tank be used to sell fuel?

Not on its own. BSTI's schedule covers verification of storage tanks, tank lorries and dip rods and does not name electronic level sensors. For trade, ask BSTI about the tank's own verification. A sensor remains useful for stock monitoring and alarms on generator day tanks and depot tanks.

How soon will I hear back about measuring instruments and meters?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other measuring instrument products

Each product type has its own page as it is published; until then its card opens the category form.

All measuring instruments and meters