Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Measuring instruments and meters

Digital thermometer supplier in Bangladesh

Send the range, the medium and the fitting to Roptan, your digital thermometer supplier in Bangladesh. We source Pt100, thermocouple and food thermometers with their probes and certificates from verified sellers, check them and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get digital thermometers sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying digital thermometers in Bangladesh

A digital thermometer turns the signal from a probe into a reading on a display or a logger. In Bangladesh, dyeing and finishing mills, boiler houses, food and beverage plants, cold stores and laboratories buy them to control process heat, check hot water and steam lines, and keep chilled and frozen goods in range. This page covers industrial and food use only.

The sensor matters more than the display. A digital thermometer supplier in Bangladesh should tell you the probe type, its tolerance and the points it was calibrated at. Tell us the range, the medium and how the probe fits. We source from verified sellers, check the probe and certificate, and deliver.

Kinds of digital thermometer

Pt100 probe thermometers

Platinum resistance probes are usually chosen for process temperatures from about minus 200 to 500 °C, where accuracy matters and the reading must stay stable for years.

Type K thermocouple thermometers

The common general-purpose thermocouple, usable from about minus 200 to 1350 °C, inexpensive and sold as a wide choice of probes. In a reducing atmosphere type K can read low, and type N is the usual alternative.

Thermistor food thermometers

A thermistor is sensitive to small changes but has a smaller range and less stability than platinum, so it suits spot checks of food and cold rooms rather than process control.

Process probes in thermowells

A thermowell is a closed tube in the pipe or vessel that protects the probe from pressure, flow and chemicals, and lets you change the probe without opening the line. Response is slower.

Cold-chain thermometers and recorders

Thermometers and temperature recorders for the transport, storage and distribution of chilled and frozen goods. They have their own European standards, listed below.

How to specify a digital thermometer

Range and sensor
Give the lowest and highest temperature you read. Above about 500 °C, or where a cheaper probe with a wide range is enough, a thermocouple usually replaces a Pt100.
Accuracy, not resolution
Many meters display 0.1 °C, but that is only how finely the number is shown. Ask for accuracy at stated temperatures and the sensor tolerance class.
Coefficient and wiring
Industrial platinum probes use a coefficient of 0.00385; older probes with other values exist, so match a replacement to the meter. Use three or four wires where accuracy matters.
Probe and sheath
Give probe length and the fitting. Sheaths are typically stainless steel; higher temperatures need other metals.
Thermowell length
A well in a fast flow can fail from vibration, so its length is set by calculation, for bar-stock wells to ASME PTC 19.3 TW-2016. Give the fluid and the pipe velocity.
Wash-down and humidity
Food plants hosed at high pressure and temperature need IP69K-rated parts. In Bangladesh's hot, humid monsoon, sealed housings protect connectors.

Standards, tests and paperwork

IEC 60751:2022
The current edition for industrial platinum resistance thermometers and sensors. Some guides still cite the 2008 edition, so ask which one the probe is made to.
IEC 60584-1
Sets the voltage tables and tolerance classes for thermocouples, the common reference that type K probes and meters are built to.
EN 13485 and EN 12830
Cover thermometers and temperature recorders used in transporting, storing and distributing chilled and frozen goods. Ask for them on cold-chain orders.
BSTI schedule
The Weights and Measures Rules, amended in May 2024, list non-clinical thermometers by range, and standard thermometers and temperature indicators for calibration. Ask whether verification applies to your use.

What moves the price of a digital thermometer

  • Sensor: Pt100, thermocouple and thermistor probes sit at different prices.
  • Accuracy: a tighter tolerance class and a multi-point calibration certificate cost more.
  • Probe: length, sheath metal, the fitting and any thermowell add to the price.
  • Housing: wash-down ratings such as IP69K cost more than a standard case.
  • Display and logging: a logger, alarms or a cold-chain standards claim raise the price.

Lead times and delivery

Lead times vary with the probe and whether a seller holds it in Bangladesh or imports it to order. A custom probe length, sheath metal or thermowell, sea freight and clearance at Chattogram, and a local calibration certificate each add time. Roptan confirms dates and the minimum in the quote.

We deliver anywhere in Bangladesh. Handheld and food thermometers arrive with their probes and certificates. For process probes, the seller fits the thermowell or fitting, connects the probe to the indicator or PLC and checks the reading at site temperature. You receive the certificate, manual, warranty terms and a VAT invoice (Mushak 6.3).

What we check for this order

  • Ice-point checkWe check a probe in a stirred bath of crushed ice and distilled water, which holds the melting point of water, against its tolerance.
  • Sensor and coefficientWe check the probe type, tolerance class and, for Pt100, the coefficient match the quote and the meter.
  • Calibration pointsWe check the certificate's points bracket your working temperature, not only 0 and 100 °C.
  • Probe and fittingWe check probe length, sheath material and the thread or thermowell against your order.

Questions buyers ask

Should I choose a Pt100 or a thermocouple?

Choose a Pt100 where accuracy and long-term stability matter, up to about 500 °C. Choose a thermocouple above that, or where a cheaper probe covering a wide range is enough. Thermocouples can drift in their first hours of use, and the meter must compensate for the cold junction at its terminals.

Which thermometer suits a cold room or a refrigerated truck?

A thermometer or recorder for chilled and frozen goods, ideally to EN 13485 for the thermometer or EN 12830 for the recorder. A thermistor probe suits spot checks of the goods. Ask for calibration points that bracket your storage temperature.

Can I check a thermometer myself?

Yes, roughly. Put the probe in a stirred bath of crushed ice and distilled water, which holds the melting point of water, and compare the reading with the tolerance stated on the datasheet. For points across your working range, use a calibration laboratory and keep the certificate.

Why does my steam line probe respond slowly?

Usually the thermowell. It protects the probe from pressure and flow and lets you change the probe without opening the line, but it adds mass between the steam and the sensor, so the reading lags. That is the price of protection on a pressurised line.

How soon will I hear back about measuring instruments and meters?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other measuring instrument products

Each product type has its own page as it is published; until then its card opens the category form.

All measuring instruments and meters