Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Boilers

Steam boiler supplier in Bangladesh

Roptan is your steam boiler supplier in Bangladesh for fire tube and water tube boilers. Tell us the steam load, pressure and fuel: we source from verified sellers, check the papers the Boiler Act asks for, and deliver to site.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get steam boilers sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying steam boilers in Bangladesh

A steam boiler heats water in a closed vessel until it raises steam under pressure, which carries heat to dyeing machines, washers, cookers and presses; in a textile mill, dyeing and finishing take most of the heat. Under the Boiler Act 2022, a closed vessel holding more than 25 litres of water that makes steam is a boiler, so a factory steam boiler is almost always regulated.

A steam boiler supplier in Bangladesh has to deliver papers as well as a vessel: without them registration can be refused and the boiler may not be used. Roptan sources from verified sellers, checks the papers before shipment, and has the seller erect, commission and support registration. You deal with Roptan only.

Kinds of steam boiler

Fire tube shell boilers

Hot gases pass through tubes inside a water-filled shell. Steam comes up more slowly but a lot is stored, which helps with batch loads. Rarely used above about 24 bar (2.4 MPa).

Water tube boilers

Water runs in tubes inside the furnace, so steam comes up quickly from less water, and there is less chance of a catastrophic failure. Usually the choice for higher pressure.

Small industrial and industrial boilers

The Act sets three classes: electrode, small industrial and industrial. The rules under the Act fix capacity, pressure and service life for each, so ask which class the offered unit falls in.

Locally built or imported boilers

A local build needs approved design and drawings, stage inspections, welding tests by a listed person and a construction certificate. An import needs a code and inspection body the Boiler Board recognises.

How to brief a steam boiler supplier in Bangladesh

Output and pressure
Steam in kg/h at your working pressure, and the feed water temperature. The Act bars use above the certificate pressure, so set design pressure with care.
Fuel and firing
Gas, oil or both, with the gas line pressure. Firing systems fall under EN 12953-7 for shell boilers and EN 12952-8 for water tube boilers.
Feed water
A test of the make-up water and the share of condensate returned. Untreated water causes scale and corrosion, which cut heat transfer and overheat the tubes.
Blowdown
Typically 4 to 8 percent of feed water flow, up to 10 percent with high-solids make-up. Ask for automatic control on conductivity.
Efficiency basis
Direct (input-output) or indirect (heat loss) method, and which calorific value; on natural gas, net reads several points above gross.
Operator
Nobody may operate a boiler without a licence from the Chief Inspector, granted after an examination and valid for five years.

Law, codes and papers for a steam boiler

Boiler Act 2022 registration
The user applies to the Office of the Chief Inspector of Boilers and pays the prescribed fee; the certificate lasts at most one year, renewable.
ASME BPVC Section I or EN 12953
Section I covers power boilers; EN 12953 covers shell boilers, with part 5 on inspection and marking and part 11 on acceptance tests.
Inspection body certificate
For an import, the certificate of an inspection body the Boiler Board recognises. Without it, registration may be refused.
ISO 4126-1 and EN 10204
ISO 4126-1 covers safety valves. EN 10204 type 3.1 material certificates come from the maker; type 3.2 adds an independent inspector.

What moves the price of a steam boiler

  • Design pressure: more pressure needs a thicker vessel, and above about 24 bar usually a water tube design.
  • Heat recovery: an economiser saves fuel; one cooling flue gas below the acid dew point needs corrosion-resistant materials.
  • Water treatment: softening, deaeration and dosing add to the package and protect the tubes from scale and corrosion.
  • Site and papers: foundation, flue, steam piping, erection and the drawings and support needed for registration.

Lead times and delivery

Time depends on whether the boiler is built here or imported. A local build waits on design approval and stage inspections; a 2026 circular, as reported, gives makers at most 12 months from design approval. An import waits on the Chief Inspector's prior approval and freight. Registration comes before first use. Roptan confirms dates and any minimum in the quote.

We deliver to your site. The seller sets the boiler, connects fuel, water, steam and flue, commissions it and trains your operator; the registration number is then marked on it permanently, as the Act requires. Handover: drawings, code, inspection, material and safety valve certificates, the commissioning record and a VAT invoice (Mushak 6.3).

What we check for this order

  • Code and inspection bodyWe check that the design code and inspection body are ones the Boiler Board recognises, and that the certificate names this boiler.
  • Import approvalBefore an imported boiler ships, we ask for the Chief Inspector's prior approval to import; you confirm the procedure with that office.
  • Papers match the serialWe match drawings, material certificates and safety valve certificates to the boiler's serial number, since registration rests on them.
  • Pressure and class agreeWe check that design pressure, safety valve set pressure and the class under the Act agree across the quote and papers.

Questions buyers ask

Does every steam boiler need registration in Bangladesh?

Almost every factory one does. A closed vessel holding more than 25 litres of water that makes steam is a boiler under the Act, and every boiler used in Bangladesh must be registered. The government can exempt a special class by gazette notice; ask the Chief Inspector's office if you think one applies.

Fire tube or water tube: which should I choose?

For most factory loads at moderate pressure, fire tube, since stored steam helps with batch demand. Choose water tube for higher pressure, because fire tube boilers are rarely used above about 24 bar, or where steam must come up fast. We ask for both where both fit.

Can I import a steam boiler myself?

Yes, but the papers decide whether it can be registered: a code and inspection body recognised by the Boiler Board, that body's certificate, and a listed indentor if one is used. Prior approval of the Chief Inspector is also required to import; confirm the procedure with that office before you pay.

Can I buy a used steam boiler?

Yes, if its papers move with it. With the Chief Inspector informed, the previous user's registration papers and certificate pass to you, and you take a certificate in your own name. Ask for the registration number on the boiler and the last certificate before you agree terms.

How soon will I hear back about boilers?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other boiler products

Each product type has its own page as it is published; until then its card opens the category form.

All boilers