Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Boilers

Oil fired boiler supplier in Bangladesh

Roptan is your oil fired boiler supplier in Bangladesh for furnace oil and diesel firing. Tell us the oil, steam load and pressure: we source boiler, burner and fuel set from verified sellers, check them and the Boiler Act papers, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get oil fired boilers sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying oil fired boilers in Bangladesh

An oil fired boiler raises steam or heats water with a burner that atomises liquid fuel. In Bangladesh that means diesel, a light oil that flows without heating, or furnace oil, a heavy residual fuel that must be heated first. Oil is often the answer where there is no gas line: new industrial gas connections outside economic zones and industrial parks were stopped from April 2021 and, as reported, resumed in 2025 by priority.

An oil fired boiler supplier in Bangladesh has to quote the fuel side as well as the shell: storage, heating, filtering and the burner. Roptan sources the package from verified sellers, checks the burner standard and the registration papers, and delivers; the seller erects and commissions it. You deal with Roptan only.

Kinds of oil fired boiler

Diesel fired boilers

Diesel is a light oil that flows without heating, which keeps the fuel side simple. Choose it where you want to avoid the heating and filtering that heavy oil needs.

Furnace oil fired boilers

Heavy residual oil, too thick to pump or atomise cold, usually heated to roughly 65 to 120 °C depending on grade. Its sulphur forms sulphur dioxide and can corrode a boiler left to cool.

Oil fired fire tube or water tube boilers

Oil changes the burner and fuel side, not the shell choice: fire tube for moderate pressure and batch loads, water tube where high pressure is needed. The firing system falls under EN 12953-7 or EN 12952-8.

Oil fired hot water boilers

Heat water without raising steam, with the same burner and fuel set. Confirm with the Chief Inspector whether your unit must be registered.

How to brief an oil fired boiler supplier in Bangladesh

Oil grade
Diesel or furnace oil, with viscosity and sulphur content from your fuel supplier's data. Burner atomisation depends on oil temperature and viscosity.
Storage, heating and filtering
For furnace oil: storage and day tank, line heating and filters, sized so oil reaches the burner hot enough to atomise.
Burner
Forced draught oil burners are built to EN 267. Ask for the rated range on your oil against the boiler's full and low load.
Stack temperature
Sulphur makes acid gases, so ask for the minimum flue gas temperature and the economiser material; condensed acid corrodes unsuitable metal.
Output and pressure
Steam in kg/h at working pressure and feed water temperature, or hot water in kW, with peak and average demand.
Water and blowdown
A make-up water test, since untreated water causes scale, corrosion and foaming, and automatic blowdown controlled on conductivity.

Standards and registration for oil fired boilers

EN 267
Forced draught burners for liquid fuels. Ask which edition the burner is built to and its rated range on your oil.
EN 12953-7 or EN 12952-8
Requirements for firing systems for liquid and gaseous fuels, on shell and water tube boilers respectively.
Boiler Act 2022
The user registers the boiler with the Office of the Chief Inspector of Boilers and runs it under a licensed operator, with boiler water inside the rules and code.
Build or import papers
A local build needs approved drawings, stage inspections and a construction certificate; an import, a recognised code and an inspection body certificate.

What moves the price of an oil fired boiler

  • Fuel type: furnace oil needs heating, filtering and more handling plant than diesel.
  • Fuel storage: tank size, day tank and line heating are part of the package price.
  • Heat recovery: an economiser on oil firing needs a stack temperature limit or acid-resistant materials.
  • Pressure and design: more pressure needs a thicker vessel and, at the top end, usually a water tube design.
  • Water treatment and blowdown control, which cost more at the start and protect the tubes.

Lead times and delivery

Dates depend on build or import, and on the fuel side: furnace oil needs storage, heating and filtering designed to your site, diesel much less. A local build waits on design approval and stage inspections; an import waits on the Chief Inspector's prior approval to import and on freight. Registration comes before first use. Roptan confirms dates and any minimum in the quote.

We deliver to your site. The seller sets the boiler, connects the fuel set, heating and filters, water, steam and flue, sets the burner up on your oil and trains your operator. Papers at handover: burner and firing documents, code and inspection certificates, material certificates, the commissioning record and a VAT invoice (Mushak 6.3).

What we check for this order

  • Fuel side quoted in fullWe check the quote covers storage, day tank, heating and filtering for furnace oil, not the boiler alone.
  • Burner to EN 267We check the burner is built to EN 267 and rated for your oil grade and the boiler's load range.
  • Stack and economiserWe ask for the minimum flue gas temperature and the economiser material in writing, so acid corrosion is designed out.
  • Registration papersWe check the code and inspection certificate and, for an import, the Chief Inspector's prior approval before the boiler ships.

Questions buyers ask

Diesel or furnace oil: which should I burn?

Diesel flows without heating, so the fuel side is simpler. Furnace oil is a heavy residual fuel that must be heated, usually to roughly 65 to 120 °C depending on grade, and filtered, and its sulphur adds a corrosion risk. Ask sellers to quote both fuel sides where both suit your site.

Why does sulphur in the oil matter?

Burning it forms sulphur dioxide, and acid condenses if flue gas cools below the acid dew point. That corrodes economisers and boilers left to cool. Ask the seller for a minimum stack temperature and economiser materials chosen for oil firing.

Does an oil fired boiler need registration?

Yes, if it is a boiler under the Act: a closed vessel of more than 25 litres of water that makes steam. The fuel does not change that. The user registers it with the Office of the Chief Inspector of Boilers; for a hot water unit, confirm with that office whether yours must be registered.

Why do factories buy oil fired boilers?

Often because they have no gas line. A 2020 circular stopped new industrial gas connections outside economic zones and industrial parks from April 2021; 368 applications were still pending in October 2024, and connections were reported to resume in April 2025 with priority to export-oriented factories. Tell us your gas status and we quote the fuel side to match.

How soon will I hear back about boilers?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other boiler products

Each product type has its own page as it is published; until then its card opens the category form.

All boilers