Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Light engineering and machinery parts

Sewing machine part supplier in Bangladesh

Need a sewing machine part supplier in Bangladesh? Send the machine model, the stitch it sews and the worn part or its number. Roptan sources hooks, bobbin cases, loopers, feed dogs, presser feet and needles from verified sellers, checks them and delivers.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get sewing machine parts sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying sewing machine parts in Bangladesh

Sewing machine parts are the pieces that form and feed the stitch: hooks, bobbin cases, loopers, feed dogs, presser feet and needles. They wear in daily use, and garment and textile factories in Bangladesh replace them to keep lines running. Which parts a machine uses depends on the stitch it forms, so the stitch class is the first thing to know.

A part that nearly fits costs more in stopped machines than it saves. As your sewing machine part supplier in Bangladesh, Roptan matches the part to your machine model and stitch class, sources it from a verified seller, checks fit and hardness against your original and delivers to the factory.

Kinds of sewing machine part

Hooks and bobbin cases

For lockstitch machines, stitch 301. A rotating hook catches the needle thread below the cloth and carries it around the bobbin case, so hook and case must match each other and the machine's timing.

Chainstitch loopers

For stitch 401, where one needle thread interloops with one looper thread, used for main seams on wovens. The looper takes the place of the hook and bobbin.

Overlock loopers and knives

Overlock machines use loopers fed from thread cones instead of a bobbin, and usually trim the fabric edge as they sew. Loopers and knives are the parts to name when ordering.

Coverstitch parts

For stitches 602 and 605, with two or three needle threads and a looper. The needle count decides which looper and feed parts fit.

Feed dogs and presser feet

Feed dogs rise through slots to move the cloth while the presser foot holds it against them. A walking foot is often used on very thick work.

Needles

Sized by a metric number, the needle diameter in hundredths of a millimetre. Ball-point needles push between the loops of close knits instead of cutting them.

How to order a part that fits

Stitch class
Give the ISO 4915 stitch number the machine sews, such as 301 or 504. It tells the seller which mechanism, and so which parts, are involved.
Machine model and part
Quote the machine model and the part number from its parts list, or send the worn part. A foot made for one shank type does not fit another, so the model decides.
Threads and needles
For overlock machines state the thread formation, from one to five threads, since a looper set is made for it. For coverstitch, state the needle count.
Hook type
Say whether the machine has a rotary hook or the older shuttle design, which carries the bobbin inside a small shuttle.
Needle size and point
Give the metric size and the point: ball point for knits. The needle's scarf gives the hook room to pass, so needle and hook must suit each other.
Hardness and fits
No published hardness range exists for these parts, so take it from the original or the machine maker's drawing. Hook races and bobbin cases usually run to close fits.

Standards for stitches, seams and parts

ISO 4915
Classifies stitch types by number: 301 lockstitch, 401 chainstitch, 504 three-thread overedge, 516 safety stitch, 602 and 605 coverstitch. It is the shared language for ordering parts.
ISO 4916
Classifies seam types, separately from stitches. A seam specification naming both tells the maker which machine and parts are involved.
ISO 6508-1 and ISO 6507-1
Rockwell and Vickers hardness test methods, used to compare a copied hook or feed dog with the original.
ISO 2859-1:2026
Third edition of the attribute sampling scheme, used to accept a batch of parts against an agreed limit.

What moves the price of sewing machine parts

  • Machine class: five-thread overlock and multi-needle coverstitch parts involve more matched pieces than single-needle lockstitch parts.
  • Matched sets: a hook with its bobbin case, or a looper set for a thread formation, is usually quoted as a set.
  • Proof: a hardness reading against the original and a material certificate add cost to each batch.
  • Quantity: a single copied part carries the full cost of measuring; a batch shares it.

Lead times and delivery

Time depends on whether the part is held in Bangladesh, has to be imported or has to be made from a sample. A part copied from a worn sample also waits on measuring, hardening and a trial on your machine. Roptan confirms the dates and any minimum in your quote, after the model and part have been checked.

We deliver to your factory anywhere in Bangladesh, with parts bagged and labelled by machine model, stitch class and part number, and sets packed together. For a copied part, a trial set comes first for your mechanics to run before the batch. A VAT invoice (Mushak 6.3) comes with the delivery.

What we check for this order

  • Model and stitch matchedWe check the part against your machine model, stitch class, thread formation or needle count before ordering.
  • Hardness against the originalWe have a copied hook, looper or feed dog read for hardness beside your original part, by the same method.
  • Trial on your machineWe have a trial set run on your machines and approved before a copied part is made in quantity.
  • Batch sampleWe check a sample from each batch for fit and finish against the approved part, under ISO 2859-1.

Questions buyers ask

What do you need to supply a hook?

The machine model, the stitch it sews (usually 301 for a lockstitch hook), whether it has a rotary hook or a shuttle, and the worn hook with its bobbin case if possible. Hook and case work as a pair and must suit the machine's timing.

Which needle should I use on knit fabric?

A ball-point needle, whose rounded tip pushes the knit aside instead of cutting it. Choose the size by its metric number, the needle diameter in hundredths of a millimetre, matched to the thread and fabric weight.

Why can't an overlock use lockstitch parts?

It forms the stitch differently. A lockstitch machine uses a hook and bobbin; an overlock uses loopers fed from thread cones and usually trims the edge with knives. Its looper set is also made for a set number of threads, from one to five.

What does the stitch number on my machine mean?

It is the ISO 4915 stitch class. 301 is lockstitch; 401 single-needle chainstitch; 504 three-thread overedge; 516 a 401 chainstitch and 504 overedge sewn together; 602 and 605 coverstitch with two or three needles. Quote it when you order parts.

How soon will I hear back about light engineering and machinery parts?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the quantity, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other light engineering products

Each product type has its own page as it is published; until then its card opens the category form.

All light engineering and machinery parts