Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Light engineering and machinery parts

Gear and shaft supplier in Bangladesh

Need a gear and shaft supplier in Bangladesh? Send the old gear, its mating gear or a drawing, with the load and speed. Roptan sources spur, helical, bevel and worm gears and shafts from verified workshops, checks them and delivers.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get gears and shafts sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying gears and shafts in Bangladesh

A gear passes motion and torque from one shaft to another, and the shaft carries it on keys, splines or a press fit. Mills, factories and machine owners in Bangladesh replace them in gearboxes, conveyors, hoists and process machinery. Steel is the usual gear material for its strength-to-weight ratio and cost, though engineering plastics now replace metal in many lighter uses.

EPB data for FY2025-26 shows Bangladesh exports few gears or shafts, so the demand is home supply. As your gear and shaft supplier in Bangladesh, Roptan turns a worn gear or a drawing into a full gear data sheet, places it with a verified workshop, checks the first piece and delivers.

Kinds of gear and shaft

Spur gears

Teeth straight and parallel to the axis, meshing only on parallel shafts. Good at moderate speeds, noisy at high speeds. Choose them for simple drives and change gears.

Helical gears

Angled teeth that engage gradually, so they run more smoothly and quietly than spur gears. Choose them where noise or vibration matters.

Bevel gears

Connect shafts whose axes cross, often at a right angle, and both wheels of the pair must be bevel gears. Order them as a pair.

Worm sets

A worm and worm wheel give a high-torque, low-speed ratio in one compact stage. Choose them for hoists, winches and conveyor drives.

Shafts

Plain, stepped with keyways, or splined. Traverse induction hardening is widely used on shaft-type parts, giving hard journals over a tougher core.

How to specify a gear or shaft

Module and teeth
In metric work size is the module: pitch circle diameter divided by the number of teeth. Give module and tooth count, not only the outside diameter.
Pressure angle
Commonly 20 degrees, with 25 also used and 14.5 found on older machines. State the angle, or ask for it to be confirmed on the sample: a copy measured by teeth and diameter alone can carry the wrong one.
Gear data table
Put module, teeth, pressure angle, helix angle where used and accuracy grade in a table beside the view; ISO 2203 sets how the gear itself is drawn.
Steel and hardening
Carburising suits case-hardening steel of about 0.1 to 0.3 per cent carbon, with a case typically 0.5 mm deep. Induction hardening suits about 0.40 to 0.45 per cent carbon equivalent and typically gives 37 to 58 HRC.
Hardness on the drawing
State surface hardness, core hardness, case depth and where each is measured, shown as ISO 15787 sets out.
Bores and seats
Give the gear bore and the shaft's bearing seats as ISO 286-1 classes, such as H7 with h6, plus keyway or spline size.

Standards for gear accuracy and checks

ISO 1328-1 and ISO 1328-2
Part 1 grades flank tolerances on cylindrical gear teeth; Part 2 covers radial composite deviation, checked by rolling the gear against a master.
ISO 6336-1 and ISO 6336-5
Load capacity of spur and helical gears, and the strength of gear materials. A calculation is not a test: the standard does not assure the performance of an assembled drive.
ISO 14104
Surface temper etch inspection for grinding burn after a hardened gear is ground. Ask for it on heavily loaded ground gears.
ISO 6508-1 and ISO 6507-1
Rockwell and Vickers hardness test methods, for the surface, core and case readings on the drawing.

What moves the price of a gear or shaft

  • Cutting method: hobbing suits medium to high volumes; below that a numbered cutter on a milling machine is used.
  • Finishing: a finer accuracy grade needs shaving, grinding, honing or lapping after cutting.
  • Hardening route: carburising, induction hardening or nitriding each adds a stage and its own checks.
  • Steel: case-hardening and alloy steels with a material certificate usually cost more than plain bar.
  • Gear type: a bevel pair or a worm set needs matched parts, not one gear.

Lead times and delivery

Time depends on the number of stages: cutting, hardening, straightening and grinding are done one after another, and any done outside the workshop add transport and waiting. A one-off milled gear differs from a hobbed batch. Roptan confirms the dates and any minimum in your quote, after the sample or drawing has been checked.

We deliver to your factory or site anywhere in Bangladesh. Gears and shafts are oiled and packed so teeth and journals do not touch, matched pairs are packed together and tagged, and the hardness and inspection records travel with them. A VAT invoice (Mushak 6.3) comes with the delivery.

What we check for this order

  • Module and angleWe check module, tooth count and pressure angle against the brief, and that a replacement meshes with its mating gear.
  • Hardness and caseWe have surface and core hardness read at the drawing positions on the first piece, with case depth where specified.
  • Bore, keyway and teethWe check bore, keyway and tooth thickness on the first piece and on a sample under ISO 2859-1, as agreed in the order.
  • Bar certificateWe check that the EN 10204 certificate covers the bar or forging used for the shafts and gear blanks.

Questions buyers ask

Can you copy a worn gear without a drawing?

Usually, if the mating gear or the gearbox data is available. The workshop measures module, teeth and pressure angle, not just outside diameter, since older machines may use 14.5 degrees. Hardness is tested, as it cannot be judged by eye. Send both gears where you can.

Spur or helical gears?

Spur gears are simpler, suit parallel shafts and run well at moderate speeds but get noisy when fast. Helical gears engage gradually, so they run more smoothly and quietly. Replace like with like in an existing gearbox, since the shafts and bearings were sized for one type.

Which hardening should a gear have?

It depends on load and wear. Carburising gives a hard case on a tough core and suits gears in heavy service. Induction hardening suits medium-carbon steel. Nitriding is done at about 482 to 621 degrees C in ammonia. Name the method and hardness, or let the seller propose.

Does a load calculation prove a gear will last?

No. ISO 6336 gives a method to calculate load capacity, and its own scope says it does not assure the performance of an assembled drive. Use it to size the gear, then check the finished gear's hardness and accuracy.

How soon will I hear back about light engineering and machinery parts?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the quantity, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other light engineering products

Each product type has its own page as it is published; until then its card opens the category form.

All light engineering and machinery parts