Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Valves

Safety valve supplier in Bangladesh

Roptan is your safety valve supplier in Bangladesh for boilers, air receivers, pressure vessels and process lines. Send the set pressure, medium and capacity: we source from a verified seller, check the set certificate, seal and markings, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get safety valves sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying safety valves in Bangladesh

A safety valve opens by itself when pressure passes a set point, lets steam, gas or liquid out until the pressure falls, then closes. It protects a boiler, air receiver or pressure vessel when pressure control fails. Factories, power plants, hospitals and hotels in Bangladesh buy them for new plant and as replacements.

A safety valve supplier in Bangladesh should give you a valve set and certified for your duty, not a catalogue item. Send the set pressure, medium and relieving capacity. We source from verified sellers, compare quotes on the same duty, check that each valve is set, certified and sealed, and deliver.

Kinds of safety valve

Spring-loaded safety valves

The usual design: a spring holds the disc shut until pressure beats it, and on gas or steam the valve usually pops fully open. Choose it for boilers, air receivers and most vessels.

Relief valves

For liquids: the valve opens in proportion to the rising pressure rather than popping. Choose it for liquid-filled lines and vessels.

Safety relief valves

Built to serve gas or liquid. Choose it where the service can be either, and say which medium sets the sizing.

Pilot-operated safety valves

A small pilot valve, connected to the system pressure, commands the main valve to open. Ask the seller whether it suits your duty.

Valves with a lifting lever

Some safety valves carry a lever that opens them by hand in an emergency. Say on the order if you need one.

Bursting disc combinations

A bursting disc is a leak-tight, single-use device that can also be fitted together with a safety valve; ISO 4126-3 covers the pair.

How to specify a safety valve

Set pressure
The pressure at which the valve opens, in bar(g), from the design pressure of the boiler or vessel it protects. It is the first figure on the order.
Medium and service
Steam, air, gas or liquid, with temperature. It decides between a safety valve, a relief valve and a safety relief valve.
Relieving capacity
The flow the valve must pass, in kg/h of steam or m³/h of air or liquid, from a sizing, usually to API 520 Part 1.
Blowdown
How far pressure must fall before the valve closes, usually roughly 2 to 20 percent of set pressure. Some valves allow it to be adjusted.
Connections and rating
Inlet and outlet size, flange standard and class, read at temperature from ASME B16.34 for steel bodies. API 526 covers flanged steel pressure relief valves.
Boiler or vessel
Say what the valve protects. On a boiler the safety valve is a mounting the Boiler Rules 2025 require before inspection, so its papers must be ready for the boiler inspector.

Standards, codes and certificates for safety valves

ISO 4126-1
Safety valves; EN ISO 4126-1 is the European adoption. Part 4 covers pilot-operated valves and Part 3 valves with bursting discs.
ASME BPVC Section I and Section VIII Division 1
American codes for power boilers and for pressure vessels. Ask which one the valve is built for.
API 526 and API 527
API 526 covers flanged steel pressure relief valves; API 527 covers seat tightness. Ask for the seat test result per valve.
EN 12953-8
Safeguards against excessive pressure on shell boilers built to the European series. Cite Part 8 for safety valves.
EN 14129
Pressure relief valves for LPG pressure vessels, a standard of its own for LPG tanks.

What moves the price of a safety valve

  • Design: a spring-loaded valve against a pilot-operated one.
  • Size and relieving capacity, which set the valve size the seller offers.
  • Body material and flange standard, and a build to API 526 or ISO 4126-1.
  • Setting and certification: each valve set, tested and sealed with its own certificate.
  • Boiler duty, where the valve and its papers face the boiler inspection.

Lead times and delivery

We found no published lead time for safety valves, so we give no figure. Common spring valves for air and low-pressure steam may be held by importers; a large size, a high set pressure, a pilot-operated design, special materials or a witnessed set test usually mean importing to order. Roptan confirms dates and any minimum in the quote.

Each valve arrives set, tested and sealed, tagged with its set pressure and serial number; do not break the seal on site. Safety and relief valves are declared on import under HS 848140. For a boiler, the Boiler Rules 2025 have the boiler inspector set and test the safety valve at the inspection; the boiler user fixes the date. Handover papers: set certificate, seat test record, material certificate and a VAT invoice (Mushak 6.3).

What we check for this order

  • Set pressure and sealWe match the set pressure on the tag and certificate to your order and check that the seal is intact and the serial numbers agree.
  • Sizing against dutyWe check the datasheet capacity covers your duty and the valve type suits the medium.
  • Seat tightness recordWe ask for each valve's seat test, to API 527 or the maker's stated standard, so a weeping valve is caught before fitting.
  • Markings and certificatesWe match body markings to the EN 10204 type 3.1 certificate and ask for PMI on stainless valves.

Questions buyers ask

What is the difference between a safety valve and a relief valve?

A safety valve serves gas or steam and usually opens fully with a pop. A relief valve serves liquid and opens in proportion to the rising pressure. A safety relief valve can serve either. Tell us the medium, so the seller quotes and sizes the right type.

Does a boiler safety valve need approval in Bangladesh?

Yes, through the boiler. Boilers come under the Boiler Act 2022, and the boiler user registers each one with the Office of the Chief Inspector of Boilers. Under the Boiler Rules 2025 the boiler inspector sets and tests the safety valve at the inspection, on a date the user fixes with the office. Roptan supplies the valve with its papers; the boiler user arranges the inspection.

What is blowdown?

The fall in pressure between the point at which the valve opens and the point at which it closes again. It is usually roughly 2 to 20 percent of set pressure, and some valves let it be adjusted. Ask for the blowdown on the datasheet along with the set pressure.

Can a bursting disc replace a safety valve?

A bursting disc is leak-tight, lower cost and single use: once it bursts it must be replaced. ISO 4126-3 covers a disc fitted together with a safety valve. On a boiler, ask the boiler inspector before changing the protection.

How soon will I hear back about valves?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other valve products

Each product type has its own page as it is published; until then its card opens the category form.

All valves