Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Valves

Ball valve supplier in Bangladesh

Roptan is your ball valve supplier in Bangladesh. Tell us the size, rating, bore, seat material and service: we source from verified sellers, check the seat, certificates and test records, and deliver to site.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get ball valves sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying ball valves in Bangladesh

A ball valve shuts a line by turning a ball with a hole through it a quarter turn across the flow. Factories, contractors and utilities in Bangladesh fit ball valves on water, compressed air, gas, fuel and chemical lines. It is a shut-off valve: a plain ball valve does not give fine flow control.

Most ball valve problems trace back to the seat: a soft seat chosen for the wrong temperature or chemical, or no fire test on a fuel line. A ball valve supplier in Bangladesh should name the seat on the quote. Roptan sources from verified sellers, checks seat, body and test papers against your service and delivers.

Kinds of ball valve

Floating ball valves

The ball is held by its seats, not by a trunnion, and line pressure pushes it slightly onto the downstream seat. Choose it for most water, air and utility lines.

Trunnion ball valves

The ball is anchored top and bottom by a trunnion. Choose it for large valves and high pressures, including gas and oil pipeline service.

Full bore and reduced bore

A full bore valve has an oversized ball whose hole matches the pipe; a reduced bore valve passes flow through a bore one size smaller.

Three-piece ball valves

A centre section holding the ball, stem and seats bolts between two end pieces. Choose it where seats must be renewed without cutting the valve out of the pipe.

V-port ball valves

A V-shaped ball or seat, made for quarter-turn valves that must regulate rather than only shut off. Choose it, usually with an actuator, for flow control duty.

Three-way and four-way ball valves

An L-shaped or T-shaped hole through the ball diverts or mixes flow between ports. Choose it to switch a line between two pumps, filters or tanks.

How to brief a ball valve supplier in Bangladesh

Service
Fluid, working pressure and temperature, and whether the valve isolates or regulates.
Seat and seals
PTFE, reinforced PTFE, PEEK, nylon or an elastomer, with graphite stem packing where heat demands it. The seat sets the temperature and chemical limits.
Body material
Stainless steel, carbon steel, brass, bronze, or a plastic or lined body for corrosive liquids. State the grade, not only the metal.
Bore and design
Full or reduced bore; floating or trunnion; one body or three-piece; and the port pattern for three-way or four-way valves.
Rating, ends and length
DN and PN or Class, the flange standard of your pipe, and face-to-face to EN 558 or ISO 5752. For steel, the rating at temperature follows ASME B16.34.
Actuator mounting
For an actuated valve, the ISO 5211 flange size on the valve top, the air or three phase power supply and the control signal.
Closing speed
On long water and pumped lines, ask for a gearbox or an actuator with a set closing time, as a quick quarter turn can cause water hammer.

Ball valve standards and type tests

API 608 and ISO 17292:2015
Metal ball valves for petroleum, petrochemical and allied plant, with flanged or butt-welding ends. Ask which API 608 edition a valve follows.
ISO 7121:2016 and EN 1983:2013
Steel ball valves for general industrial service, outside oil and gas.
API 6D and ISO 14313:2025
Pipeline valves, including trunnion ball valves for gas and oil transmission. Larger trunnion valves face stricter seat testing.
API 607 and ISO 10497:2022
Fire type-testing of soft-seated quarter-turn valves. On gas, fuel and oil lines, ask for the fire-test certificate for that valve type.
ISO 15848-1
Type tests and classes for fugitive emissions, the leakage from the stem to the air. Ask for it on volatile chemical and gas service, not water.

What moves the price of a ball valve

  • Seat and ball materials: soft PTFE seats usually cost less than PEEK, metal seats or special alloy balls.
  • Body material: brass and carbon steel usually sit below stainless steel, alloy or lined bodies.
  • Design: trunnion valves for large sizes and high pressure usually cost more than floating valves.
  • Type tests: a fire-tested or fugitive-emission qualified design usually costs more than a general-purpose valve.
  • Automation: an actuator, its ISO 5211 mounting kit and a positioner each add their own cost on top of the valve.

Lead times and delivery

Small ball valves in brass, carbon steel and stainless steel are often in importers' stock. Trunnion valves, high classes, special seats or alloys, fire-tested designs and actuated valves are usually imported to order and take longer, more so with witnessed tests. Roptan confirms the date and any minimum order in the quote.

Roptan delivers ball valves to sites across Bangladesh, ends capped and each valve tagged to its schedule line. The seller mounts and strokes actuators before dispatch. Handover includes test records, material and fire-test certificates where ordered, datasheets, warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Seat named and rightWe check the quote names the seat material and its temperature limit, and that both suit your service.
  • Fire-test paperFor gas, fuel and oil lines, we check the fire-test certificate covers the valve type, size range and seat offered.
  • Test record and markingsWe match body markings to the material certificate and check the pressure test record covers the serials shipped.
  • Actuator fitFor actuated valves we check the ISO 5211 flange, stem drive and stroke time against the actuator and signal.

Questions buyers ask

Should I choose a full bore or a reduced bore ball valve?

Choose full bore where the line must stay unrestricted; reduced bore, one size smaller through the ball, where it need not. State which one you need, because a quote may assume either.

Can I control flow with a ball valve?

Not with a plain one: it is made to be fully open or shut and lacks fine control part open. If a quarter-turn valve must regulate, ask for a V-port ball valve, usually with an actuator and positioner, or use a globe or control valve.

Why did closing a ball valve make the pipe bang?

A ball valve can shut in a quarter turn, and stopping moving water that fast causes water hammer. On long or pumped lines, fit a gearbox or an actuator with a set closing time, and close large manual valves slowly.

Which HS line is a ball valve imported under?

Heading 8481, in its own group for ball and plug valves. Sanitary taps for basins and cisterns sit in a different group. Your customs broker confirms the full line.

How soon will I hear back about valves?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other valve products

Each product type has its own page as it is published; until then its card opens the category form.

All valves