Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

HVAC and cold chain · Exhaust fans

Roof exhaust fan supplier in Bangladesh

Use Roptan as your roof exhaust fan supplier in Bangladesh. Tell us the shed height, roof type and the heat to remove: we source powered roof fans, turbine ventilators or smoke-extract fans from verified sellers, check them and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get roof exhaust fans sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying roof exhaust fans in Bangladesh

A roof exhaust fan sits over an opening at the top of a building and draws out the hot air that collects there. Warm air is buoyant: the taller the shed and the hotter the air, the stronger the stack effect, so roof outlets suit tall warehouses, weaving sheds and stores. Summer highs in Bangladesh usually reach 38 to 41 °C, and section 52 of the Bangladesh Labour Act 2006 expects roofs built so work-room temperature does not rise.

A roof exhaust fan supplier in Bangladesh should look at the inlets as closely as the fan. Roptan briefs verified sellers, checks airflow on a tested curve, has the seller confirm the roof can take the fan and that low openings let air in, then delivers and arranges fitting.

Kinds of roof exhaust fan

Powered roof-mounted fans

A motor-driven fan on a base over a roof opening, usually thermostat controlled. Choose it where the shed needs a set airflow whatever the wind, including on still, humid days.

Gable fans

Powered fans set high in the gable wall rather than on the roof sheet. Choose them when the roof should not be cut or loaded but hot air still needs a high outlet.

Wind-driven turbine ventilators

Unpowered roof turbines spun by wind and rising warm air. They need no power, but their airflow follows the weather, so they cannot be held to a duty. Choose them as extra outlets, not the main exhaust.

Smoke and heat extract roof fans

Roof fans built as powered smoke and heat control ventilators for a fire smoke-extract system, and chosen with that system's design: inlets, openings, wind and smoke temperature set how they perform.

How to specify a roof exhaust fan

Airflow
Work it from shed volume times air changes per hour. Commonly used rates are 2 to 4 for ordinary factories and 10 to 15 where fumes or moisture are present.
Low-level inlets
A roof fan works with the stack effect when fresh air enters low down, through doors, wall louvres or vents. Without them it moves far less than its rating.
Roof and structure
Give the roof type, slope, purlin spacing and the opening size. The seller should confirm in writing that the roof carries the fan and its base.
Rain and heat
Monsoon rain is heavy, so ask for a weather cowl, a raised base and flashing detailed for your sheeting. State the exhaust air temperature, since the motor sits in the hottest air.
Motor and controls
Ask for the IE class to the current IEC 60034-30-1 edition, a dust-protected enclosure and thermostat or speed control. At 63 per cent speed a fan draws about 25 per cent of full power.
Noise near neighbours
Roof fans send sound outdoors. If homes or offices are close, ask for sound data rated to AMCA 300 or 301, with the distance and conditions stated.

Standards, tests and the law for roof exhaust fans

ISO 5801:2017
The laboratory method behind a fan curve: airflow, pressure, power and efficiency on a standard airway. Ask for the curve and the method it names.
ISO 5802:2001
The method for testing fan performance in situ, after installation. Agree with the seller what will be measured on site before it goes into the contract.
EN 12101-3:2015
Applies only to roof fans that are part of a fire smoke-extract system. Ask for the certificate covering the exact model offered.
Bangladesh Labour Act 2006, section 52
Requires adequate ventilation in every work-room and walls and roofs built so the temperature does not rise. The government may order insulation, whitewashing or a higher roof.

What moves the price of a roof exhaust fan

  • Powered fan or turbine: a turbine has no motor and no running cost, but no set duty.
  • Airflow duty, which sets blade diameter and motor rating.
  • Base, cowl and flashing made to suit your roof sheeting.
  • Material: galvanised steel, aluminium, or stainless steel for corrosive air.
  • Smoke-extract certification, and thermostat or speed control.
  • Roof access, lifting and making good the opening during fitting.

Lead times and delivery

Standard powered roof fans and turbines from stock usually come quickest. Bases made to fit your sheeting, stainless steel builds, large fans and certified smoke-extract fans add time, and fitting waits on roof access and dry days in the monsoon. Roptan confirms the delivery date, the fitting date and the minimum order in the quote.

We deliver to sites across Bangladesh. Where fitting is in scope, the seller frames the opening, fixes the base, seals the flashing and checks rotation and current draw. Handover covers the fan curve, motor data, wiring, warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Roof load in writingWe ask the seller to confirm that the roof and purlins carry the fan and base before the order is placed.
  • Inlets against airflowWe compare the low-level openings with the total roof fan airflow, so the fans can draw air through the shed.
  • Curve and methodWe check airflow is read from a curve tested to ISO 5801 or AMCA 210 at your pressure, not quoted at free air.
  • Smoke duty paperworkFor smoke-extract fans, we check the EN 12101-3 certificate matches the exact model offered.

Questions buyers ask

Is a turbine ventilator enough for a factory roof?

Usually not on its own. A turbine moves air only when wind or rising warm air drives it, so it cannot be held to a set airflow on a still, humid day. Use powered roof fans for the duty and treat turbines as extra outlets.

Why does our roof fan not cool the floor?

Usually because air cannot get in low down. A roof fan removes only as much air as enters, and the stack effect needs inlets near the floor. Open low louvres or doors on the far side, then check the airflow again.

Can an ordinary roof fan double as smoke extract?

No. A smoke-extract fan must be a powered smoke and heat control ventilator under EN 12101-3, within a designed system that accounts for inlets, openings, wind and smoke temperature. Ordinary exhaust fans are not built or tested for that duty.

Will a roof fan leak in the monsoon?

Not if the base and flashing suit the sheeting. Ask for a raised base, a weather cowl and flashing detailed for your roof profile, and have the seller water test the joint after the first heavy rain.

How soon will I hear back about exhaust fans?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the capacity, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other exhaust fan products

Each product type has its own page as it is published; until then its card opens the category form.

All exhaust fans