Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

HVAC and cold chain · Exhaust fans

Inline duct fan supplier in Bangladesh

Roptan is an inline duct fan supplier in Bangladesh for buildings where the fan sits inside the duct. Tell us the rooms, the duct length and bends and what the air carries: we source from verified sellers, check pressure rating and noise, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get inline duct fans sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying inline duct fans in Bangladesh

An inline duct fan is fitted inside a round or square duct rather than in a wall or roof opening, so one fan can serve rooms far from an outside wall. Typical buyers in Bangladesh are apartment and office developers, hotels, hospitals and restaurants, for toilets, kitchens, basements and plant rooms. Every metre of duct and every bend adds pressure the fan must overcome, which is why a fan picked by diameter alone often disappoints.

As your inline duct fan supplier in Bangladesh, Roptan works from the whole duct run. We send one brief to verified sellers, compare airflow at the duct's pressure on a tested curve, check how the fan is mounted, isolated and reached for cleaning, and deliver with fitting through the seller.

Kinds of inline duct fan

Axial inline fans

An axial impeller in the duct, for high airflow at low pressure. Choose them for short, straight runs: small axial extractors are usually unsuitable beyond 3 or 4 m of duct, depending on bends.

Centrifugal inline fans

A centrifugal wheel in a casing that fits the duct, usually chosen for the higher pressure of long runs, filters and several bends. Backward-curved wheels use less energy; forward-curved suit clean air only.

Kitchen-duty inline fans

Fans for cooking exhaust, with access for cleaning and a build that tolerates grease. Choose them for restaurant and hotel kitchens, since grease left in fans and ducts becomes a fire hazard.

Hazardous-area inline fans

Fans with ATEX or IECEx certification covering fan and motor. Choose them for ducts that carry solvent vapour, such as paint stores and print rooms.

How to specify an inline duct fan

Airflow per room
Give each room's volume and the air changes you need. Commonly used rates for kitchens run from 15 to 60 an hour; check rates for your building against local rules.
Duct length and bends
Give the run length, every bend and any grille, damper or filter. These set the pressure in Pa, and the fan's airflow must be read at that pressure.
Mounting and isolation
Flexible connectors are usually fitted just before and after the fan, so vibration and noise do not travel along the duct.
Access for cleaning
Leave access panels at the fan and along kitchen ducts. Grease building up in uncleaned kitchen exhaust is a fire hazard.
Replacement air
Exhaust draws an equal flow in from somewhere. Show the door grilles, transfer ducts or fresh air inlets that will supply it.
Noise
State how close the fan sits to bedrooms, wards or offices, and ask for sound data rated to AMCA 300 or AMCA 301, with conditions stated.
Motor
Single or three phase at 50 Hz, the IE class to the current IEC 60034-30-1 edition, and a dust-protected enclosure where the air is dusty.

Standards and tests for inline duct fans

ISO 5801:2017
The test method for airflow, pressure, power and efficiency on standard airways. Ask for a curve tested to it, read at your duct pressure.
ANSI/AMCA 300 and 301
Methods for testing and rating fan sound. A noise figure without one of them, the distance and the room conditions cannot be compared.
NFPA 96
The US standard for ventilation control and fire protection of commercial cooking operations, cleaning included. It is not a Bangladesh rule, but a useful reference for kitchen ducts.
ATEX Directive 2014/34/EU
Covers equipment for potentially explosive atmospheres. Where the duct carries flammable vapour, ask for the certificate covering fan and motor together.

What moves the price of an inline duct fan

  • Fan type: axial inline for short runs, centrifugal inline for higher pressure.
  • Duty: the airflow needed at your duct pressure, which sets wheel and motor size.
  • Casing material and access panels for kitchen or humid duty.
  • Hazardous-area certification for solvent-laden air.
  • Speed control, and the flexible connectors, silencers and dampers around the fan.

Lead times and delivery

Fans in common duct sizes from a seller's standard range usually come quickest. Kitchen-duty builds, larger centrifugal units, certified hazardous-area fans and large project quantities take longer, and fitting waits on the duct work being ready. Roptan confirms the delivery date and the minimum order in the quote.

We deliver to sites across Bangladesh. Where fitting is in scope, the seller hangs the fan, fits flexible connectors on both sides, connects the wiring, checks rotation and airflow at the grilles, and leaves the access panels clear. Handover covers the fan curve and test method, sound data, wiring diagram, warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Rating at the run's pressureWe check airflow is read from the curve at the pressure of your full duct run, bends included.
  • Flexible connectorsWe check connectors on both sides of the fan are in the scope, so vibration and noise stay out of the duct.
  • Cleaning accessFor kitchen duty, we check the fan and duct have access panels and a build that can be cleaned.
  • Sound data basisWe check any noise figure names AMCA 300 or 301 and its conditions, so offers compare.

Questions buyers ask

Can a small bathroom extractor serve a long duct?

Usually not. A small axial extractor is typically unsuitable beyond 3 or 4 m of duct, depending on bends, because the added pressure chokes its airflow. For longer runs choose an inline fan rated for the duct's pressure, often a centrifugal type.

Why is the inline fan noisy in the rooms below?

Vibration and fan noise travel along rigid duct. Flexible connectors just before and after the fan keep them out of the duct. Check the mounting, and ask for sound data rated to AMCA 300 or 301 when choosing a replacement.

What fan suits a restaurant kitchen duct?

A kitchen-duty fan with access for cleaning, in a duct that can be cleaned along its length. Grease builds up in uncleaned kitchen exhaust until it becomes a fire hazard. The US standard NFPA 96 is a useful reference for cleaning.

Why does the toilet still smell with the fan running?

Usually because replacement air cannot get in, or the duct is choking the fan. Exhaust draws an equal flow in from somewhere, so the door needs a grille or a gap below it. Then check the airflow at the grille against the design.

How soon will I hear back about exhaust fans?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the capacity, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other exhaust fan products

Each product type has its own page as it is published; until then its card opens the category form.

All exhaust fans