Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

HVAC and cold chain · Exhaust fans

HVLS ceiling fan supplier in Bangladesh

Roptan is an HVLS ceiling fan supplier in Bangladesh for warehouses, factories and halls. Tell us the floor size, the roof height and what stands on the floor: we source fans from verified sellers, check diameter, mounting and controls, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get HVLS ceiling fans sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying HVLS ceiling fans in Bangladesh

An HVLS (high-volume, low-speed) fan is a fan more than 2.1 m across, usually hung from the ceiling, that turns slowly and moves a large column of air down and out across the floor. Warehouses, distribution centres, factory floors, hangars and farm sheds use them to reduce heat stress, often where air conditioning is impractical or costly. It moves air within the space; it does not remove heat or fumes.

An HVLS ceiling fan supplier in Bangladesh should size the fan to the floor and say plainly what it will not do. Roptan sends one brief to verified sellers, compares diameter and coverage against your layout, has the seller confirm structure and clearances for the site, and delivers with installation through the seller.

Kinds of HVLS ceiling fan

Large-diameter ceiling fans

Fans towards the top of the range, up to about 7.3 m across, for open halls and high roofs. A larger fan throws a deeper floor jet and loses less to friction, so fewer fans may cover the floor.

Smaller HVLS ceiling fans

Fans from about 2.1 m across, for lower roofs, smaller halls and floors broken up by racking, where a large fan's air column would not spread as designed.

Pole-mounted HVLS fans

HVLS fans on a standing pole rather than a ceiling mount. Choose them where a ceiling mount is not practical, for example where the roof cannot carry the fan.

How to specify an HVLS ceiling fan

Floor plan and roof height
Give hall length, width and clear height, and where racking, cranes, lights and sprinklers sit. The seller confirms blade clearances and spacing for the site.
Diameter and coverage
Diameter, not speed, sets how far the floor jet reaches. HVLS fans run from about 2.1 to 7.3 m across; the seller should lay them out on your plan.
Structure
Give the roof steel and purlin layout. The seller should confirm in writing that the structure carries the fan, its mount and its running loads.
Speed control
Ask for variable speed control. Power falls with the cube of speed, so a fan turned down on a mild day draws far less.
Motor and enclosure
Ask for the motor's IE class to the current IEC 60034-30-1 edition, and an IP first digit of 5, dust protected, for dusty or lint-heavy halls.
Exhaust alongside
List the exhaust fans and inlets already in the building. HVLS fans do not change air temperature or humidity, so heat, fumes and moisture still need exhaust fans to leave.

Tests, papers and the law for HVLS fans

ISO 5801:2017 and ANSI/AMCA 230
ISO 5801 excludes fans made only for air circulation, such as ceiling fans; AMCA tests those under a separate standard, ANSI/AMCA 230. Ask what test lies behind any HVLS airflow figure.
IEC 60034-30-1
Motor efficiency classes, now in the 2025 edition adopted in Europe as EN IEC 60034-30-1:2026. Ask for the class on the motor plate where the motor falls in its scope.
ANSI/AMCA 300 and 301
Methods for testing and rating fan sound. Ask which one any noise figure follows, where offices or quiet rooms sit near the fans.
Bangladesh Labour Act 2006, section 52
Requires adequate ventilation and a work-room temperature that allows work in reasonable comfort. HVLS fans help comfort; fresh air still has to come from ventilation.

What moves the price of an HVLS ceiling fan

  • Diameter: a larger fan costs more each, but fewer may cover the floor.
  • Motor and drive: direct drive or another drive, and the motor's efficiency class.
  • Speed control, and any link to the building's controls.
  • Mounting: ceiling mount, a drop to clear obstructions, or a pole.
  • Installation at height: lifting equipment, structure checks and wiring.

Lead times and delivery

Fans in a seller's standard diameters usually come quickest; large diameters, special mounts and big quantities take longer. Installation waits on the structure check and on safe access at height. Roptan confirms the delivery and installation dates and the minimum order in the quote.

We deliver to sites across Bangladesh. Where installation is in scope, the seller fixes the mount to the structure, hangs and balances the fan, wires the controller and runs it through its speed range. Handover covers the mounting confirmation, motor data, wiring and controls guide, warranty terms and a VAT invoice (Mushak 6.3).

What we check for this order

  • Structure confirmedWe have the seller confirm in writing that the roof structure and the mount carry the fan at your site.
  • Clearances for the siteWe ask the seller to confirm blade clearances from sprinklers, lights, cranes and racking on your layout.
  • Airflow figures explainedWe ask what test and conditions lie behind any airflow or coverage claim, since ISO 5801 excludes ceiling fans.
  • Exhaust still coveredWe check your exhaust fans and inlets can still remove heat and fumes, since an HVLS fan only stirs the air.

Questions buyers ask

Does an HVLS fan cool the air?

No. A fan does not change air temperature or humidity; it moves air. Moving air over people can reduce heat stress, but the hall's air stays as warm. Heat, fumes and moisture still need exhaust fans to leave the building.

One big fan or many small ones?

For cooling people, a large slow fan is cheaper to run per unit of air moved. Fan power rises roughly with the cube of air speed, so a fan delivering air at 32 km/h (20 mph) needs about 64 times the power of a similar fan at 8 km/h (5 mph). Racking and layout still decide the count.

What diameter do we need?

Start from the floor and the roof height. Under ideal conditions an 8 ft (2.4 m) fan throws a floor jet about 910 mm deep and a 24 ft (7.3 m) fan one about 2.7 m deep, so bigger fans reach further. Racking breaks that up, so ask for a layout on your plan.

Can HVLS fans replace exhaust fans with cooling pads?

No, they do different jobs. Pads and exhaust fans bring outside air in and push hot air out; an HVLS fan stirs what is already inside. In humid monsoon months pads cool little, and steady air movement from HVLS fans then helps comfort.

How soon will I hear back about exhaust fans?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the capacity, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other exhaust fan products

Each product type has its own page as it is published; until then its card opens the category form.

All exhaust fans