Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Air compressors

Piston compressor supplier in Bangladesh

Roptan works as your piston compressor supplier in Bangladesh. Tell us the pressure your tools need and how often they run: we source single or two-stage units from verified sellers, check the tank and papers, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get piston compressors sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying piston compressors in Bangladesh

A piston compressor, also called reciprocating, draws air into a cylinder and compresses it with a piston driven by a crank. The air-cooled piston unit is the most common compressor at small sizes, up to single-digit horsepower. Garages, workshops, spray-paint shops and small plants buy it for air used in bursts; multi-stage machines serve high-pressure jobs such as PET bottle blowing.

As a piston compressor supplier in Bangladesh, Roptan asks verified sellers to quote free air at your working pressure with the receiver in the package, checks the unit, its tank papers and the service kit, and delivers it. The seller installs and commissions it, and you deal with Roptan only.

Kinds of piston compressor

Single-stage piston compressors

Air is compressed once, usually at ratings from about 1.7 to 8.6 bar (25 to 125 psig). Choose it for garage and workshop tools and spray guns at ordinary pressure.

Two-stage piston compressors

Air is compressed twice and cooled between stages, usually rated from about 8.6 to 12 bar (125 to 175 psig) or higher. Intercooling improves efficiency and durability; choose it above single-stage pressures.

Oil-free piston compressors

No oil in the cylinder, and lighter to carry. They usually cost more to buy, run less efficiently and need more upkeep than lubricated units, so choose them only where oil in the air is a problem.

Engine-driven portable units

Petrol or diesel driven compressors for remote sites without a grid supply. They are noisy and need ventilation for exhaust gases, so run them in the open.

Multi-stage high-pressure units

Several stages for very high pressures, used for gas pipelines, refineries and PET bottle blowing. Efficient, but high in first cost, installation and upkeep.

How to brief a piston compressor supplier in Bangladesh

Pressure at the tool
The highest pressure any tool needs, in bar. Single-stage ratings stop around 8.6 bar, so anything above points to a two-stage unit.
Free air and the test basis
Flow in litres a minute or m³/min with the pressure, and the test basis behind both. A flow figure alone does not compare.
Receiver volume
The tank's volume and stored pressure set your reserve of air. A receiver also damps pulsation, cools the air and collects water, so buy it with the compressor.
How the air is used
Piston units run quite efficiently at part load but less efficiently than other types at full load. If air runs all shift, compare a screw machine.
Cooling and the room
Compression heat has to go somewhere. In a hot workshop, give the unit free cooling air or a ducted vent so it does not overheat.
Drive and supply
Electric motor on single or three phase 50 Hz, or a petrol or diesel engine where there is no grid. State the supply so motor and starter match.

Standards and papers for piston compressors

ISO 1217
Acceptance tests for flow and power of displacement compressors, piston machines included. Ask for the delivered flow and power at your pressure on this basis.
ASME BPVC Section VIII Division 1 or EN 13445
Pressure vessel design codes that apply to the tank of a tank-mounted unit. Ask which code was used, the design pressure and the tank's test certificate.
ISO 8573-1
Purity classes for particles, water and oil. A lubricated unit feeding users that need clean air needs the class stated where the air is used.
Bangladesh Labour Act 2006, section 71
Plant worked above normal air pressure must be kept from exceeding its safe pressure: a duty on your establishment.

What moves the price of a piston compressor

  • Stages: two-stage units reach higher pressure with intercooling and are priced above single-stage ones.
  • Duty rating: units built for longer running hours against light-duty workshop units.
  • Cooling and drive: air or water cooled, electric motor or petrol or diesel engine.
  • Lubrication: oil-free piston units usually cost more to buy and to maintain.
  • Electricity: over the years it usually outweighs the purchase price, so compare power at your pressure.

Lead times and delivery

No published lead time for piston compressors in Bangladesh was found, so we give no figure. Common single-stage workshop units are often held by sellers and usually arrive sooner than two-stage, oil-free or engine-driven units that must be shipped to order. Roptan confirms dates and any minimum in the quote.

We deliver to your workshop or plant anywhere in Bangladesh. The seller places the unit with room for cooling air, connects power and the air line, and runs it under load. At handover, ask for the tank's test certificate, the manual, the service schedule, the warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Duty rating against your hoursWe check the stated duty rating against how long your tools run, so a light-duty unit is not sold for shift work.
  • Tank papersWe check the tank's design code, design pressure and test certificate match its nameplate before the unit ships.
  • Flow at your pressureWe ask for free air delivery and power at your working pressure on the ISO 1217 basis, not a bare flow figure.
  • Service schedule and kitWe ask for the maker's service schedule, including relief valve testing, and the service kit price before you buy.

Questions buyers ask

Do I need a single-stage or a two-stage piston compressor?

It depends on pressure. Single-stage units are usually rated up to about 8.6 bar, which covers most workshop tools. Two-stage units go to about 12 bar or more, and intercooling helps them run efficiently and last. Ask for the rated delivery pressure.

Can a piston compressor run all day?

It can run long hours, but at full load it is less efficient than other types. Small air-cooled single-acting units are generally designed to run not more than about half the time, some up to 80 percent, so ask for the maker's rated duty in writing before buying for shift work. For all-shift demand, compare a screw compressor.

Is a double-acting, water-cooled piston machine still a good buy?

Rarely for a new plant. These machines need heavy foundations and are increasingly replaced because of obsolescence, maintenance issues and a lack of parts. If a seller offers one, ask who holds its parts in Bangladesh before you order.

Why does my piston compressor tank fill with water?

Bangladesh air is humid much of the year, and compressing it squeezes out water that collects in the receiver. Drain the tank as the manual says and add a dryer where water would harm tools or products.

How soon will I hear back about air compressors?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other air compressor products

Each product type has its own page as it is published; until then its card opens the category form.

All air compressors