Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Cranes and hoists

Jib crane supplier in Bangladesh

Tell Roptan the load, the reach and where the jib will stand. As your jib crane supplier in Bangladesh, we source from a verified seller, check the mounting drawing and base loads, and arrange installation through the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get jib cranes sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying jib cranes in Bangladesh

A jib crane carries a hoist on a horizontal arm that swings around a pillar or a wall bracket, giving one machine, bench or loading point a lift of its own. Workshops, assembly lines, machine shops and loading docks use jibs, often under a large bridge crane, so that small lifts no longer queue for it.

A jib crane supplier in Bangladesh can sell an arm and a hoist, but safety depends on the slab, column or wall it is fixed to. Roptan takes your load, reach and mounting, sources from a verified seller and checks the base reactions and mounting drawing. The seller installs and load tests the crane.

Kinds of jib crane

Free-standing pillar jibs

Bolted to a reinforced concrete foundation by base plate or sleeve, they can turn a full 360 degrees. Choose one to serve a work area away from walls and columns.

Mast jibs

Floor supported and held at the top by the building structure, they usually also turn 360 degrees. Choose one where the overhead structure can take the top restraint.

Wall and column jibs

Fixed to a structural wall or column, they usually turn about 180 degrees and leave the floor clear. A cantilever bracket puts less direct force into the column than a tie-rod design.

Articulating jibs

Two arms joined by a pivot reach around corners and obstructions. Choose one for tight cells with machines or columns in the way.

Portable jibs

On a wheeled or mobile base, for places where a permanent fixing is not possible.

How to specify a jib crane

Load first
Start with the heaviest load plus slings. It sets the arm section, the hoist and the forces on the base.
Reach and height under the arm
Each jib type has a maximum arm length, and a longer arm lowers the load it can carry. State the reach and the clear height under the arm.
Slewing angle
State 180, 270 or 360 degrees, and whether the arm is turned by hand or motor. A wall jib usually turns no more than about 180 to 200 degrees.
Mounting
A base-mounted jib needs a reinforced, poured concrete foundation; a wall or column must take dynamic loads; a ceiling must be checked before anything hangs from it.
Hoist and power
Manual or electric chain hoists are common on jibs; a low-headroom wire rope hoist suits some heavier ones. Electric hoists are usually quoted for three phase 50 Hz.
Duty and classification
State lifts per hour and hours per day. Sellers can classify the jib under ISO 4301-4:2025, the current jib crane part.
Outdoor use
Outdoor and dockside jibs need a coating chosen for the site, against summer heat and monsoon rain.

Law, standards and tests for a jib crane

Labour Act 2006, section 68
A jib is a crane under the Act: sound construction and adequate strength, a thorough examination by a competent person at least once in every twelve months with a register, and a marked safe working load.
ISO 10245-4:2026
The current ISO part on limiting and indicating devices for jib cranes. Ask which limit switches, overload protection and indicators are fitted.
Load test and records
Ask for a witnessed load test to the seller's written procedure and keep the signed test sheet with the examination register.

What moves the price of a jib crane

  • Capacity and reach: a heavier load or longer arm needs a deeper arm and a larger base.
  • Mounting: a pillar needs a foundation; a wall jib needs a column or wall that can carry it.
  • Slewing: the rotation angle, and turning by hand or by motor.
  • Hoist and trolley: manual, electric chain or wire rope, pushed or powered.
  • Height under the arm: a taller pillar adds steel and base load.
  • Outdoor coating for open or coastal sites.

Lead times and delivery

The time depends on whether the seller's standard sizes fit or the arm, pillar and base are designed for you, and whether the crane is imported, with customs clearance at Chattogram. A new concrete base must be poured and cured before the jib is bolted down. Roptan confirms the dates and any minimum order in the quote.

Ask for the base-plate or sleeve layout and base loads with the order, so your engineer approves the mounting and the foundation is ready on arrival. The seller mounts the jib, fits the hoist and runs the load test. You receive the test sheet, manual, spares list, warranty and a Mushak 6.3 VAT invoice. Roptan delivers across Bangladesh.

What we check for this order

  • Base reactions and drawingWe check the seller gives the base reactions and mounting drawing, and that your engineer has approved the wall, column or foundation.
  • Rated load at full reachWe check the rated load in the quote applies at the full reach you asked for, not only near the pillar.
  • Limiting devicesWe check the quote lists the limiting and indicating devices fitted, and that the safe working load will be marked on the crane.
  • Witnessed testWe check the load test procedure and witness are named in the quote and the signed test sheet comes at handover.

Questions buyers ask

Pillar jib or wall jib: which should I choose?

A pillar jib turns a full circle and stands wherever a foundation can be poured. A wall or column jib keeps the floor clear but usually turns about 180 degrees and puts its load into the building. Choose the wall type only after an engineer confirms the column or wall can carry the dynamic loads.

Does a jib crane need a foundation?

A base-mounted jib needs a reinforced, poured concrete foundation sized for its base reactions; do not rely on an existing floor slab without checking it. Wall and column jibs need no foundation of their own, but the structure they hang on must be checked.

How much can a jib crane lift?

It depends on the type, reach and mounting, and sellers' standard ranges differ, so we give no single figure. A longer arm reduces the load. Send your load and reach, and the seller states the rated load at that reach.

Can a jib crane work under an existing overhead crane?

Yes, that is a common use: the jib serves one station so small lifts stop waiting for the main crane. Check that the jib and its hoist clear the bridge crane's lowest point, and agree which crane serves which zone.

How soon will I hear back about cranes and hoists?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other crane products

Each product type has its own page as it is published; until then its card opens the category form.

All cranes and hoists