Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Cranes and hoists

Electric chain hoist supplier in Bangladesh

Tell Roptan the load, the lift height and the beam the hoist will hang from. As your electric chain hoist supplier in Bangladesh, we source from a verified seller, check the chain and test papers, and deliver to your site.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get electric chain hoists sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying electric chain hoists in Bangladesh

An electric chain hoist lifts on a load chain driven by a motor, with a brake that holds the load when power stops. It hangs from a hook, a beam trolley, a jib arm or a crane girder. Workshops, assembly lines, maintenance bays and warehouses in Bangladesh use them for lighter loads, usually a few tonnes at most.

Any electric chain hoist supplier in Bangladesh can quote a capacity. A safe hoist depends on the chain, the brake, the duty and the beam it runs on. Roptan puts these into one enquiry, sources from a verified seller, checks the chain certificate and test report, and delivers the hoist to your site.

Kinds of electric chain hoist

Hook-mounted hoists

Hang by a top hook from a beam clamp, trolley or jib. They need more headroom but move easily. Choose one when the hoist will be shifted between stations.

Lug-mounted hoists

Fixed to a trolley through a lug, they give a smaller headroom but cannot be moved easily. Choose one where hook height under a low roof matters.

Trolley hoists on a monorail

A hoist on a beam trolley travels along a single beam over an assembly or loading line. Trolleys are pushed by hand, geared or electric.

Single and two-speed hoists

A second, slow lifting speed helps place moulds, dies and parts gently. Choose two speeds when loads must be set down precisely.

How to specify an electric chain hoist

Capacity
State the heaviest load including slings. Chain hoists usually serve lighter loads, a few tonnes at most; above that, sellers tend to propose a wire rope hoist.
Lift height
Give the hook travel from the lowest pick to the highest set-down. It fixes the chain length; at the same tonnage a chain hoist can usually lift higher than a wire rope hoist.
Headroom and mounting
Measure from the underside of the beam to the floor. Hook mounting needs more headroom, lug mounting less.
Beam and trolley
Give the beam section and flange width, and whether travel is by hand, geared or electric.
Duty
State starts per hour, daily running time and how often loads come near capacity. Sellers grade duty by HMI class H1 to H4, a CMAA class or a European group; ask for it in writing.
Power and enclosures
Quote for three phase 50 Hz. Summer maxima usually reach 38 to 41 degrees C and monsoon damp is heavy, so ask for the IP rating of motor, brake and pendant.

Standards, tests and papers for an electric chain hoist

EN 14492-2:2019
The current European product standard for power driven hoists. For a European-built hoist, ask whether it is built to this edition.
ISO 3077:2001 hoist chain
Covers fine tolerance hoist chain, Grade T. Ask for the chain grade, its acceptance certificate and the wear limit for replacement.
Labour Act 2006 examination
Hoists and lifting machinery must be examined by a competent person, with a register and the safe working load plainly marked. Have yours examined on the schedule the Labour Act sets.
Acceptance load test
Ask for a test to the maker's procedure with a signed report. A US rule caps test loads at 125 percent of rated load unless the maker advises otherwise; US practice, not Bangladesh law.

What moves the price of an electric chain hoist

  • Capacity and lift height: a heavier load needs a larger hoist, a longer lift more chain.
  • Lifting speed: faster lifting, or a second slow speed, changes motor and control.
  • Trolley: plain, geared or electric.
  • Duty class: a hoist for frequent heavy use is built above one for occasional lifts.
  • Chain and hook grade, and the control type.

Lead times and delivery

Delivery depends on whether a hoist of your capacity, lift and voltage is available or must be ordered, and on import and customs clearance at Chattogram. A non-standard lift height, speed or trolley adds time. Roptan confirms the dates and any minimum order in the quote.

Roptan delivers the hoist anywhere in Bangladesh with its trolley and pendant. The seller or your electrician mounts it, connects the supply and checks that the brake holds and the limit switches stop the hook before the end of travel; then the load test is run. You receive the chain and test certificates, manual, spares list, warranty and a Mushak 6.3 VAT invoice.

What we check for this order

  • Chain certificateWe check the chain grade and acceptance certificate are supplied and the wear limit for replacement is written down.
  • Brake on power lossWe check the holding brake applies automatically when power is removed, a requirement of the US overhead crane rule.
  • Pendant and limitsWe check pendant buttons are marked for their functions and the upper limit switch is a safety stop, never the operating control.
  • Fit to the beamWe check the trolley suits your beam flange and the headroom matches the mounting quoted.

Questions buyers ask

Chain hoist or wire rope hoist: which do I need?

For lighter loads, a few tonnes at most, and moderate speeds, a chain hoist is usually smaller and simpler to keep. For heavier loads, higher speeds and constant work, sellers propose a wire rope hoist. Send the load, lift and lifts per hour and the seller confirms which fits.

How often must an electric hoist be examined in Bangladesh?

On the schedule the Labour Act sets. The Act has one section for cranes and lifting machinery and another for hoists and lifts, with different intervals, and does not say plainly which covers a stand-alone hoist on a beam. Ask the factory inspector, keep a register and mark the safe working load.

How do I look after the chain in a humid shed?

Keep it clean and lubricated, which is most of a chain hoist's routine care. Check it against the wear limit the seller gives, and replace it only with chain of the grade and size the seller specifies.

Can the hoist be moved to another beam later?

A hook-mounted hoist moves easily; a lug-mounted one does not. Before moving it, check that the new beam and its supports can carry the load and that the trolley fits the flange.

How soon will I hear back about cranes and hoists?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other crane products

Each product type has its own page as it is published; until then its card opens the category form.

All cranes and hoists