Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Garment and footwear machinery

Spinning machinery supplier in Bangladesh

Building a mill, adding a ring section or replacing cards? As your spinning machinery supplier in Bangladesh, Roptan lists every stage against your count range, sources each from verified sellers, checks it and delivers, with the seller commissioning it.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get spinning machinery sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying spinning machinery in Bangladesh

Spinning machinery turns cotton and blended fibre into yarn, stage by stage, from opening the bales to winding the packages. Bangladesh had 526 spinning mills in 2024, with yarn capacity of 4.55 million tonnes a year, on BTMA figures reported by USDA; about 80 percent of the yarn is cotton. USDA also reported several mills running at only 30 to 40 percent of capacity as gas supply fell.

The machines come from abroad: HS 8445 has no row in the EPB export table for FY2025-26. A spinning machinery supplier in Bangladesh should quote the line as one sequence. Tell Roptan the fibre, count range and output; we source from verified sellers, check each stage and its papers, and deliver. The seller installs and commissions the line.

Kinds of spinning machinery

Blow room

Opens, blends and cleans the fibre from the bales and feeds the cards. It is the first stage of every cotton line.

Cards

Separate fibres, remove impurities, neps and short fibres, orient the fibre and form sliver. The trade treats the card as the centre of the line; ask whether an autoleveller is fitted.

Draw frames and combers

Draw frames even out the sliver, with open-loop or closed-loop autolevellers. Combers are added for combed yarn, followed by a finisher draw frame.

Speed frames and ring frames

The speed frame turns sliver into roving; the ring frame drafts it with rollers, twists it on a spindle inside a rotating ring and builds the bobbin. Choose ring for fine and combed counts.

Rotor (open-end) machines

Take card sliver straight into a rotor, with no roving stage, and deliver a package. Rotors reach 140,000 rpm, but the system is limited to coarser counts.

Winders

Wind ring bobbins onto the packages knitters and weavers use. Rotor yarn needs no separate winding step.

What to tell a spinning machinery supplier in Bangladesh

Count range and fibre
Give the counts in Ne or in tex under ISO 1144, with the fibre and blend. The range decides between ring and rotor spinning.
Yarn targets
State the twist, strength and elongation the yarn must reach, measured to ISO 2061 for twist and ISO 2062 for breaking force, with count to ISO 2060.
Capacity at each stage
Ask for output per hour at every stage, so the blow room, cards, draw frames and ring frames are balanced.
Room climate
Humidity is usually held at about 45 to 55 percent in the blow room, 50 to 60 in carding and 60 to 65 in winding. Ask for the design temperature and humidity of each room.
Spares that interchange
Rings and travellers (ISO 96-1), spindle tubes (ISO 368), sliver cans (ISO 93) and spindle gauges (ISO 94) have ISO dimensions. Ask which the machines use.
Power
Ask for the kW of each machine and of the humidification plant, and a backup plan for each utility the mill depends on.

Safety and test standards for spinning machinery

ISO 11111-2 with ISO 11111-1:2016
Safety requirements for spinning preparatory and spinning machines, from opening and carding to spinning. Ask the maker for its compliance statement.
ISO 9902-2
The noise test code for spinning preparatory and spinning machinery. Ask for declared noise values measured to it.
ISO 13849-1:2023
The current edition for safety-related parts of control systems, read with ISO 12100 on risk assessment. A quote citing an earlier edition is out of date.
ISO 139
The standard atmosphere for conditioning textiles before testing. A yarn report should state it, since count, twist and strength read differently with moisture.

What moves the price of spinning machinery

  • Yarn type: combed yarn adds combers and a finisher draw frame to the line.
  • Spinning system: ring needs speed frames and winders that a rotor line does without.
  • Autolevelling on cards and draw frames: open-loop, closed-loop or none.
  • The climate plant: humidification and air conditioning sized for every room.
  • Origin, condition and the spares route for rings, travellers and spindles.

Lead times and delivery

A spinning order covers several stages, often from more than one seller, so ask for a date for each. Build time, shipping, clearance at Chattogram, which customs officials say stayed above 11 days through 2025, and the readiness of the building and power all move the start. Roptan confirms dates and any minimum in the quote.

We deliver each stage to the mill. The seller places the machines, connects power, air and the climate plant, runs them in and commissions the line with your team. You receive a stage-by-stage list with serial numbers, spares list, manuals, warranty terms and a VAT invoice (Mushak 6.3).

What we check for this order

  • Every stage listedWe check that the quote lists each stage from blow room to winding with output per hour, so no stage holds the line back.
  • Yarn test on the trial runWe ask for count, twist and strength results to ISO 2060, 2061 and 2062 on the first yarn, with the test atmosphere stated.
  • Climate designWe check that the seller states design humidity and temperature for each room, and the power of the humidification plant.
  • Origin and conditionModel, serial numbers and origin against the import papers; for used frames, the current Import Policy Order rule confirmed first.

Questions buyers ask

Ring or rotor spinning: which should I buy?

It follows the count and the yarn's end use. Ring spinning makes fine and combed counts. Rotor spinning skips the roving and winding stages and runs fast, but it is limited to coarser counts and gives a fuzzier yarn with poorer wear resistance.

Which spares should I ask about?

Rings, travellers, spindle tubes and sliver cans. ISO publishes their dimensions, so ask which standard each machine follows: interchangeable parts keep running costs down. Ask too who holds them in Bangladesh.

Can spinning machinery be bought on supplier credit?

Usually, subject to your bank. A Bangladesh Bank directive of December 2025, as reported, lets companies import capital machinery on foreign credit of at least three years without prior BIDA approval. The Import Policy Order 2026-2029 also allows contract imports without a letter of credit. Confirm the current rule with your bank.

Should I buy a used spinning line?

Only after checks. Confirm the current Import Policy Order rule for that exact machinery before you commit, ask for its age, service history and a running test, and check that rings, spindles and drafting parts for the model are still sold.

How soon will I hear back about garment and footwear machinery?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other garments machinery products

Each product type has its own page as it is published; until then its card opens the category form.

All garment and footwear machinery