Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Garment and footwear machinery

Cutting and spreading machine supplier in Bangladesh

Moving from hand spreading to a spreader, or from straight knives to a CNC cutter? As your cutting and spreading machine supplier in Bangladesh, Roptan matches machines to your fabrics, markers and volume, sources from verified sellers, checks them and delivers.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get cutting and spreading machines sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying cutting and spreading machines in Bangladesh

A spreading machine lays fabric from the roll onto the cutting table in plies, edges aligned and tension controlled. Cutting machines then cut the lay to the marker, by hand guidance or from a computer file. Garment factories in Bangladesh buy them to cut more accurately and in greater volume. They are imported: exports under HS 8451, which includes fabric cutting machines, were small in FY2025-26 (EPB).

A cutter that cannot take your lay height, or a table shorter than your markers, wastes the purchase. A cutting and spreading machine supplier in Bangladesh should start from your fabrics and cut plan. Tell Roptan the fabrics, widths, markers and daily volume; we source from verified sellers, check each machine and deliver. The seller installs and commissions it.

Kinds of cutting and spreading machine

Spreading machines

Travel the table, feeding fabric from the roll at controlled tension and keeping ply length and height even. Some cut each ply end or project defect areas onto the fabric.

Straight knife machines

Portable and versatile, more accurate on curves than a round knife and lower in cost than a band knife. Also used to split a lay into sections for easier handling.

Band knife machines

Cut blocks already rough-cut from the lay, with higher accuracy. Choose one for small parts that need a clean edge.

Round knife and die-cutting machines

Round knives suit straight lines and few plies; die-cutting machines cut small shaped parts to a fixed die.

CNC cutters

Cut the lay from a marker file sent by the CAD system, on a conveyor table with vacuum hold-down and a knife sharpener. Choose one for high volume and accuracy.

Laser, rib and tape cutters

Laser cutters cut without a blade under computer control. Rib and tape cutters slit narrow strips from knit fabric for neck and trim finishing.

What to tell a cutting and spreading machine supplier in Bangladesh

Fabric types and nap
Knits are asymmetric, and some fabrics have a one-way nap. Say which you cut, so the seller quotes the right spreading mode and a turntable or catcher where needed.
Lay height and plies
Give the ply count and compressed lay height you need for each fabric, and ask for the cutter's maximum on that fabric, not a catalogue figure.
Fabric width and marker length
State your widest fabric and longest marker, so the spreader's lay length and the cutting table fit both.
CAD and marker files
Name your CAD system and file format. Computerised cutters usually read files from any CAD system, but check yours with a sample.
Tension control
Spreading with the wrong tension distorts fabric and spoils cutting accuracy. Ask for tension or feed control on a spreader that will lay knits.
Compressed air
Where a table, spreader or clamp runs on air, state the ISO 8573-1 purity class the machine needs and size the compressor and dryer to it.

Safety standards for cutting and spreading machines

No machine-specific standard
ISO has no standard written for fabric cutters or spreaders, so they are judged against the general machinery safety standards below. Ask the maker to show compliance.
ISO 14120, ISO 13857 and ISO 13850
Guards, safety distances to danger zones, and the emergency stop. Ask how a moving spreader and a CNC cutting head meet them.
ISO 12100 and ISO 13849-1:2023
Risk assessment for machine design, and the current edition for safety-related parts of control systems.
ISO 4414
General rules and safety requirements for pneumatic systems and their components, where the machine uses compressed air.

What moves the price of cutting and spreading machines

  • Automation: hand-guided, semi-automatic or fully automatic CAD-driven cutting, and an auto-spreader in front of the cutter.
  • Cutting method: a knife or a laser.
  • Table width and the maximum lay height the cutter takes.
  • Options such as defect projection on spreaders and data links to factory systems.
  • Single-ply cutting for made-to-measure work instead of multi-ply lays.

Lead times and delivery

Time depends on the machine and its source. A hand-guided knife may be held by a seller in Bangladesh, while a CNC cutter or automatic spreader is shipped from the maker and needs a prepared floor with power and air ready. Clearance at Chattogram adds time; customs officials say it stayed above 11 days through 2025. Roptan confirms dates and any minimum in the quote.

We deliver to your cutting room anywhere in Bangladesh. The seller sets up the table and machines, loads your marker files, runs a test lay and commissions everything with your team. You receive serial numbers, manuals, the blade and spares list, warranty terms and a VAT invoice (Mushak 6.3).

What we check for this order

  • Test lay on your fabricWe have the seller spread and cut a lay of your hardest fabric at the quoted height, then compare cut parts with the pattern.
  • Marker files readWe check that the cutter reads your CAD marker files directly before the order is confirmed.
  • Fit to your roomWe check table length and width against your longest marker and widest fabric, and that power and air are ready.
  • Origin and papersModel, serial number and origin against the import papers; for a used cutter, the current Import Policy Order rule confirmed first.

Questions buyers ask

Do I need a CNC cutter, or will a straight knife do?

It follows volume and accuracy. A straight knife is portable, handles curves well and suits low volume; a band knife adds accuracy on small parts. A CNC cutter cuts from the marker file and suits high volume. A straight knife still splits lays into sections for handling.

Will a new cutter work with our CAD system?

Usually, but check. Many computerised cutters accept files from any CAD system. Send a sample marker file and ask the seller to cut it before you order.

Why relax fabric before spreading?

Fabric on the roll is stretched. Cut before it relaxes, it shrinks afterwards in the cut parts. Relax it before layering, then spread at controlled tension. Check shrinkage reports by lot too, since lots that shrink differently may need their own patterns.

Is there a safety standard for fabric cutters?

Not one written for them. ISO's clothing equipment group covers sewing machines and needles but no cutter, so the general machinery standards apply: guards, safety distances, emergency stop, risk assessment and control safety. Ask the maker which ones its technical file cites.

How soon will I hear back about garment and footwear machinery?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other garments machinery products

Each product type has its own page as it is published; until then its card opens the category form.

All garment and footwear machinery