Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Food and agro processing machinery

Snack and noodle line supplier in Bangladesh

Instant noodles, crisps or extruded snacks? As your snack and noodle line supplier in Bangladesh, Roptan sources the mixer-to-packer line from verified sellers, checks the fryer and oil system, and delivers to your factory.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get snack and noodle lines sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying snack and noodle lines in Bangladesh

A snack or noodle line turns flour, potato or grits into a packed product in one continuous run. Bangladeshi makers sell into shops at home and abroad: pasta and noodles, under HS heading 1902, earned 30.76 million US dollars of exports in FY2025-26 on EPB figures, a line that also covers other pasta. The machines themselves are imported.

A line is several machines whose capacities must match, and the fryer decides much of the product's quality. As your snack and noodle line supplier in Bangladesh, Roptan writes the product, route and kilograms per hour into one specification, sources from verified sellers and checks oil handling, heat source and spares.

Kinds of snack and noodle line

Fried instant noodle lines

Noodles are made, steamed, seasoned and dried by flash-frying in hot oil, still the usual method in Asia. Choose it for the familiar fried block.

Air-dried noodle lines

The steamed noodle is dried by hot air instead of oil, the route usually favoured for Western markets. Choose it for a non-fried block; dryer and fryer are different machines.

Pasta and vermicelli lines

Cold extrusion shapes dough for products cooked later. Choose it for spaghetti, macaroni and vermicelli; customs treats the machinery as macaroni and spaghetti machinery.

Extruded snack lines

High-temperature extrusion usually makes ready-to-eat snacks, which are then shaped, fried or baked, seasoned and packed. The same extruder family also makes breakfast cereals.

Potato chip lines

Continuous lines carry slices through a vat of hot oil. Kettle-style batch frying gives a thicker, harder bite. Choose by the chip you sell.

How to specify a snack or noodle line

Product and route
Name each product and whether it is fried, air-dried, baked or extruded. The route decides whether you buy a fryer, a dryer or an extruder.
Flour and dough
Noodle dough usually takes about 30 to 38 percent water on flour weight. Specify the mixer, rest time and sheeting rolls for the flour you will really use.
Waving, cutting and forming
Wavy noodles pack tighter, stick less in cooking and break less in handling. Ask that the waving unit, cutter and block former are named in the offer.
Fryer and oil system
Palm oil is the usual noodle frying oil for its heat stability. Ask the oil volume, turnover, filtration and how oil is drained and topped up.
Heat source
State how the fryer, steamer and extruder will be heated: steam, thermal oil, gas, LPG or electricity. Plan the boiler or heater, and a second fuel, with the line.
Finished moisture and colour
Write target moisture and colour for the finished product, and ask how fryer exit temperature is measured and held.

Standards and rules for snack and noodle makers

BSTI and the product
BSTI's 2019 failure list named noodles and crisps, and potato chips need its Certification Mark licence. Check your product against BSTI's current list.
ISO 22000 and ISO 14159
Food safety management, and hygiene requirements for machinery design. Ask that contact parts are cleanable to ISO 14159.
ISO 7304-1
The 2025 reference method for the cooking quality of pasta by sensory analysis. Use it to agree pasta and vermicelli quality at the trial.
EU acrylamide rules for exporters
For crisps sold into the EU, Regulation (EU) 2017/2158 applies: fryer exit oil temperature as low as feasible, moisture not below 1 percent, colour sorting after frying. Confirm the current text with your importer.

What moves the price of a snack or noodle line

  • Kilograms of finished product per hour, which sizes every machine.
  • Fried or non-fried route, and the number of steamers, fryers and dryers.
  • Waving, cutting and block-forming units, or extruder size and die set.
  • Oil filtration, heating system and seasoning drum.
  • Packing machines, stainless contact parts, automation and erection scope.

Lead times and delivery

No reliable typical lead time was found for these lines, so we give none. A single extruder or packing machine held in stock in Bangladesh comes quickest. A full fried noodle line built to order abroad, with boiler or thermal oil heater and building work, takes longest. Roptan confirms the dates and any minimum in the quote.

We deliver the line to your factory. The seller installs it, connects steam or thermal oil, gas and power, and runs your own flour or potatoes. You receive layout and electrical drawings, manuals, a spares list, the warranty, boiler papers where a boiler is supplied and a VAT invoice (Mushak 6.3).

What we check for this order

  • Trial on your raw materialWe ask for a run on your flour or potatoes, with finished moisture, fat and reject rate measured against your specification.
  • Matched capacitiesWe check that mixer, sheeter, steamer, fryer and packer are each rated for the same kilograms per hour.
  • Oil handling in scopeWe confirm filtration, top-up and drain systems are named in the quote, not left for later.
  • Net weight and seasoningWe ask for net-weight and seasoning accuracy at the packing machine during the trial run.

Questions buyers ask

Fried or air-dried noodles: which line should I buy?

Flash-frying is still the usual method in Asia, and air-dried blocks are usually favoured for Western markets. The two need different machines: a fryer with an oil system, or a hot-air dryer. Tell us your market and output, and we source and compare both routes.

Why are instant noodles wavy?

Mechanical waving, invented in 1953, made mass production practical: wavy noodles fit more in a pack, stick together less in cooking and break less in transport. Ask the seller to name the waving unit and the cutter and block former after it.

Which oil does a noodle fryer use?

Usually palm oil, for its heat stability and cost. Fried noodles are high in fat and low in moisture, so they can oxidise; makers add antioxidants. Plan filtration and regular top-up, and ask the seller for the fryer's oil volume and turnover.

Can I sell crisps from this line to Europe?

Yes, if the line meets the EU acrylamide rule. Regulation (EU) 2017/2158 applies to potato crisps: the lowest feasible fryer exit oil temperature, finished moisture of at least 1 percent and in-line colour sorting after frying, with a benchmark level for acrylamide in the finished crisps. Specify a fryer with a measured exit temperature and a colour sorter, and confirm the current text with your importer.

How soon will I hear back about food and agro processing machinery?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other food processing machinery products

Each product type has its own page as it is published; until then its card opens the category form.

All food and agro processing machinery