Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Food and agro processing machinery

Auto rice mill plant supplier in Bangladesh

Moving on from floor drying? Roptan, your auto rice mill plant supplier in Bangladesh, sources the whole chain from soaking tank to bagging scale from verified sellers, checks the flow sheet and papers, and delivers to your site.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get auto rice mill plants sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying auto rice mill plants in Bangladesh

An auto rice mill plant takes paddy through soaking, steaming, a mechanical dryer, husking, polishing, grading and bagging with no floor work between stages. A credit-rating study cites an estimate of more than 18,700 rice mills in Bangladesh, most small or semi-automatic. Millers move up to an auto plant to dry in any weather and sell graded, bagged rice.

Each plant joins machines from several makers, and sellers count capacity in different ways. As your auto rice mill plant supplier in Bangladesh, Roptan writes one specification from your paddy, tonnage and fuel, sources from verified sellers, compares offers on one basis and checks origin and import papers. The seller erects and commissions.

Kinds of auto rice mill plant

Parboiled (boiled) rice plants

Soaking and steaming harden the grain and move some vitamins and minerals into the white part; a dedicated dryer then feeds the mill. Choose it when you sell boiled rice.

Atap (raw) rice plants

No soaking tank, steamer or process boiler. Choose it for raw rice markets, or as a second line beside a parboiling plant, since the two are milled differently.

Semi-automatic mills

Mechanical husking and polishing, but parboiled paddy is dried on a floor in the sun, so drying capacity depends on floor space and sunshine. Choose it only where both are reliable.

Polishing and sorting upgrades

For mills that upgrade rather than rebuild: vertical cone polishers use a covered cone in a perforated screen, horizontal ones an emery-covered cylinder. A channel colour sorter usually follows.

How to specify an auto rice mill plant

Capacity on one basis
Boilers are often rated in tonnes of paddy a day, milling lines per hour. Ask for tonnes of paddy in per hour, and the hours a day the boiler and dryer can run.
Wettest paddy you buy
The dryer must bring paddy to about 12 to 14 percent moisture, the usual range for milling and safe storage. Give the wettest lot you expect, so the dryer and its heat source are sized for it.
Flow sheet
Ask for a drawing naming the machine at each stage: pre-cleaning, husking, husk aspiration, paddy separation, de-stoning, whitening, polishing, sifting, length grading and bagging.
Expected outturn
One Bangladeshi survey of automatic mills found about 65 percent head rice, 22.75 percent husk, 8.25 percent bran and 5 percent broken. Treat that as an average and ask for figures on your variety.
Colour sorter channels
State hourly capacity and the defects to reject. Cameras usually follow the channel count, so more channels cost more.

Tests, standards and licences for a rice mill

ISO 6646
Determines the potential milling yield from paddy and from husked rice. Use it to agree a yield test on your own paddy, rather than accept a figure from another mill.
ISO 712-1 and ISO 712-2
The 2024 methods for moisture in cereals. The single-part 2009 edition is withdrawn, so a moisture report that cites it uses an old method.
ISO 7301
The international rice specification, current as the 2021 edition with a 2024 amendment. Useful when you sell graded rice to institutions or abroad.
Boiler Act 2022
The parboiling boiler needs registration and a certificate for use under this Act, and its operator a licence. Agree who files for them before commissioning.
Mill licences
A credit-rating study lists a Food Controller licence, a trade licence, power approval and an environmental certificate. Confirm each against current rules.

What moves the price of an auto rice mill plant

  • Hourly capacity, which sets the size of every dryer, huller and polisher.
  • Units in parallel: one or two dryers, hullers and polishers change both cost and uptime.
  • A colour sorter, and how many channels and cameras it carries.
  • Origin: Japanese and German machines usually cost more than Indian or Chinese ones.
  • The boiler, dryer furnace, power station, panel, civil work and erection, in or out of scope.

Lead times and delivery

No reliable typical lead time exists for a whole plant, so we give none. Time grows with capacity, with sections built to order abroad and with civil work on site. Stock held in Bangladesh, and a site ready before the machines land, shorten it. Roptan confirms dates, and any minimum, in the quote.

We deliver every section to your mill site. The seller erects the machines, connects steam and power, and commissions the plant on your paddy. You receive the flow sheet, drawings, manuals, a spares list, the warranty, boiler papers and a VAT invoice (Mushak 6.3).

What we check for this order

  • One basis for every offerWe convert each quote to tonnes of paddy per hour, so rice-out and paddy-in figures are never mixed.
  • Flow sheet against the quoteWe match every stage on the flow sheet to a named machine, origin and motor rating, so nothing is left out.
  • Outturn in writingWe ask the seller to state head rice, broken and bran for your variety, then check them at the trial run.
  • Boiler papersWe check who registers the boiler and obtains its certificate under the Boiler Act 2022, and that the quote says so.

Questions buyers ask

How much head rice should an auto plant give?

It depends on the variety, the parboiling and the huller. One survey of Bangladeshi automatic mills found about 65 percent head rice and 5 percent broken, an average across mills. Ask the seller to state outturn for your paddy and prove it at the trial run or by an ISO 6646 test.

Which huller should I choose, rubber roll or disc?

Rubber rolls usually break fewer grains, so head rice is higher, but they need frequent replacement. Disc (cono) hullers husk on an abrasive disc. Ask each seller for roll life on your paddy and the price of a set, then compare yields at a trial.

Why does incoming paddy moisture matter?

The dryer has to bring paddy to about 12 to 14 percent before milling and storage. A dryer sized on dry paddy holds wet lots longer, and the mill behind it waits. Tell us the wettest paddy you buy, and we have the dryer and heat source sized for it.

Can I add a colour sorter to my existing mill?

Yes. A channel colour sorter sits after the polisher and uses cameras to reject black and discoloured grains. Give us your hourly output and the defects to remove, and we source a sorter whose capacity on rice and channel count match your line.

How soon will I hear back about food and agro processing machinery?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other food processing machinery products

Each product type has its own page as it is published; until then its card opens the category form.

All food and agro processing machinery