Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Food and agro processing machinery

Oil expeller and mustard oil mill supplier in Bangladesh

Pressing mustard for the bazar, a brand or the khail trade? As your oil expeller and mustard oil mill supplier in Bangladesh, Roptan sources the press, cleaner and filter from verified sellers, checks them and delivers.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get oil expellers and mustard oil mills sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying oil expellers and mustard oil mills in Bangladesh

An oil expeller is a continuous screw press: a screw drives seed through a caged barrel, oil seeps out between the bars and a hard cake leaves at the far end. A mustard oil mill adds seed cleaning, settling or filtering and storage tanks. Buyers range from a single mobile press on a cart to fixed mills that sell oil and khail, the cake fed to cattle.

Expeller quotes rarely state the same things: one gives seed per hour, another oil per day, a third leaves out the motor. As your oil expeller and mustard oil mill supplier in Bangladesh, Roptan puts every offer on seed input, connected load and spares, and sources from verified sellers.

Kinds of oil expeller and mustard oil mill

Fixed screw expellers

A motor and gearbox drive the screw on a fixed base. Choose it for daily pressing on mains power, and ask whether the screw is continuous or interrupted and how many stages it has.

Cold-press expellers

A cooled chamber keeps the oil below about 49 degrees C. Choose it for ghani-style oil; the word expeller alone does not say hot or cold.

Hot-press expellers

Seed is often pre-heated in a cooker and the press runs hot. Choose it where oil yield matters more than a cold-pressed label.

Mobile mini mills

Small makers in Bangladesh fit a customised expeller, driven by a diesel tiller engine, on a mini-truck or cart and press in front of the customer. Choose it for village and bazar trade.

Pre-press expellers

Large plants pre-press, then send the cake to a separate solvent extraction plant that brings residual oil below 3 percent. Choose it only as that first stage.

How to specify a mustard oil expeller

Seed input per hour
Screw presses run from about 9 kg to 16,000 kg of seed an hour. State kg of seed in, not litres of oil out, and your pressing hours a day.
Motor and connected load
Ask for motor kW and the full connected load on three phase, 50 Hz. Where mains supply is weak, a diesel-driven press is the usual fallback.
Residual oil in the cake
A screw press usually leaves about 8 to 14 percent oil in the cake. Ask for a figure measured on your own seed, not one from another seed or mill.
Screw, worms and cage
Ask whether worms and cage bars are hard-faced, their expected life on mustard, and the price of a replacement set written into the quote.
Seed supply and storage
Mustard is harvested only in February and March, so a mill that runs all year needs dry seed storage sized to its annual pressing.
Filtering
Pressed oil carries sediment. Small mills settle it or filter through cloth; larger mills usually add a filter press. Say which you need.

Seed tests and the BSTI angle

ISO 659
The reference method for the oil content of oilseeds. Agree it as the test for your incoming seed, so yield is judged against the oil the seed held.
ISO 665 and ISO 658
Moisture and volatile matter, and impurities, in oilseeds. Agree both on incoming lots; wet or dirty seed presses worse and wears worms faster.
ISO 7700-2
Checks moisture meters used on oilseeds. Ask for it if a seed moisture meter comes with the press.
BSTI and your oil
The press needs no BSTI licence; the oil is what BSTI tests. In 2019 mustard oil was among 52 products that failed BSTI parameters and were ordered off the market.

What moves the price of an oil expeller

  • Seed capacity per hour, which sets screw size, motor and gearbox.
  • One pressing stage or several, and continuous or interrupted screw design.
  • A cooker or conditioner, and water cooling of the pressing chamber.
  • Hard-faced worms, spacers and cage bars against plain steel.
  • Seed cleaner, filter press and storage tanks, in the quote or bought apart.
  • Mobile or fixed build, and Indian, Chinese or locally fabricated origin.

Lead times and delivery

No reliable typical lead time was found for expellers, so we give none. Small presses in stock in Bangladesh come quickest; a multi-stage press with cooker, filter press and tanks, built to order abroad, takes longest. Roptan confirms the dates and any minimum in the quote.

We deliver the press and its cleaner, filter and tanks to your mill. The seller installs, wires and starts the expeller, then presses your own seed. You receive the manual, the worm and cage bar spares list, the warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Trial on your seedWe ask for a timed run on your mustard with seed, oil and cake weighed, so the yield is your own.
  • Seed tests agreedWe write ISO 659 oil content and ISO 665 moisture into the order, so seller and buyer measure the seed the same way.
  • Worm and cage bar sparesWe confirm who holds worms and cage bars in Bangladesh and that a replacement set is priced in the quote.
  • Motor against your supplyWe compare motor rating and connected load with your supply, so the press runs at its stated rate.

Questions buyers ask

How much oil will stay in the cake?

A screw press usually leaves about 8 to 14 percent oil in the cake, depending on the seed, its moisture and the press. Lower figures come from pre-pressing followed by solvent extraction, a separate plant. Ask for residual oil measured on your own seed at the trial run.

What is the difference between hot and cold pressing?

Pressing alone usually heats oil to about 85 to 93 degrees C, and seed is often pre-heated to press more efficiently. Cold pressed usually means the oil stays below about 49 degrees C, which needs a cooled chamber. Say which you want; the word expeller does not tell you.

Can a mustard oil expeller run without mains power?

Yes. Mobile mills in Bangladesh drive a customised expeller from a diesel tiller engine. Fixed mills usually run an electric motor on three phase power; where supply is weak, ask for a diesel drive or a generator sized to the motor's starting load.

When should I buy seed for a year of pressing?

Mustard is harvested only in February and March, the peak months for the trade. A mill that presses all year buys then and stores the seed dry, so plan storage with the press and test moisture on every lot.

How soon will I hear back about food and agro processing machinery?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other food processing machinery products

Each product type has its own page as it is published; until then its card opens the category form.

All food and agro processing machinery