Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Industrial racks

Selective pallet racking supplier in Bangladesh

Roptan is a selective pallet racking supplier in Bangladesh for stores that need every pallet in reach. Send your pallet size, heaviest load, clear height and forklift: we source from verified sellers, check the design basis and have the seller install it.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get selective pallet racking sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying selective pallet racking in Bangladesh

Selective pallet racking is the plain upright and beam rack: frames of two uprights joined by lacing, with pairs of load beams holding pallets one deep, in single runs or back to back. Any pallet can be lifted out without moving another, so it suits mixed stock and first in, first out rotation, at the cost of more aisle space.

A selective pallet racking supplier in Bangladesh should quote load tables worked out to a named code for your pallets and floor. Send the details by form or chat: we source local or imported racking from verified sellers, ask each for the design basis, compare offers on one layout and arrange installation through the seller.

Kinds of selective pallet racking

Roll-formed clip-in racking

Beams clip into punched slots, often teardrop shaped, along the uprights, so levels can be moved quickly when pallet heights change. Choose it for mixed, changing stock at ordinary loads.

Structural bolted racking

Hot-formed C-section beams bolt to the uprights instead of clipping in, and carry much heavier loads. Choose it for heavy pallets or tall bays where levels rarely change.

Very narrow aisle (VNA) racking

The same selective rack with tight aisles, served by wire-guided or rail-guided reach trucks. Choose it when floor space is the limit and the floor can be made flat enough for guidance.

Rack-supported building

Structural uprights carry the roof and cladding as well as the stock. It suits a new store planned from scratch and becomes a building design with a structural engineer.

What to send a selective pallet racking supplier in Bangladesh

Pallets
Footprint, loaded height and heaviest loaded weight in kg. ISO 6780 lists 1,100 x 1,100 mm for Asia beside 1,200 x 1,000 mm; mixed sizes must all fit the beams and supports.
Parts on the quote
Beams, frames with lacing, pallet supports or mesh decks, footplates with anchors, shims for uneven floors, row spacers, wall ties and column guards, each listed.
Decks and sprinklers
Wire mesh decks let sprinkler water through and stop loads falling. Fire inspectors usually discourage solid decks, which block water to the levels below.
Upper floors
Inspection reports in Bangladesh quote BNBC as setting a minimum live load of 6 kN/m2 for light storage, and have flagged stores on floors designed lower. Send the slab's design load.
Seismic zone
Published BNBC 2020 studies place Dhaka in seismic Zone II and Chattogram in Zone III; confirm your site's zone. Name the site so the seller states the seismic basis and the anchor schedule.
Finish
Hot-dip galvanising to EN ISO 1461 suits damp or coastal stores but excludes continuously galvanised sheet, so ask whether roll-formed parts are pre-galvanised, galvanised after forming or powder coated.

Design codes and handover papers for selective racking

EN 15512:2020+A1:2022
European principles for the structural design of adjustable pallet racking. Ask which code the load tables were calculated to: a capacity with no named code is only a catalogue figure.
EN 16681
Seismic design of adjustable pallet racking. Ask for it, or the seller's stated equivalent, for tall runs in a higher BNBC zone such as Chattogram.
EN 15620:2021
Tolerances, deformations and clearances, which replaced the 2008 edition in 2021. The installer's plumb and beam-level readings at handover are measured against it.
EN 15635
Application and maintenance of storage equipment. It bars changes by welding or bolting unless the equipment supplier approves them.

What moves the price of selective pallet racking

  • Load and height: heavier pallets and taller frames need heavier uprights and beams, and steel weight sets much of the cost.
  • Finish: galvanised or powder coated, per part, so compare offers on the same finish.
  • Accessories: mesh decks, column guards, row spacers and wall ties add to the bay price but belong in a safe layout.
  • Scope: whether the design calculation, anchors and installation are included; some offers leave them out.

Lead times and delivery

No figure is promised here. Stock roll-formed bays usually ship far sooner than a made-to-order system, which waits on design, fabrication and finish; imported systems add shipping time. Galvanising, a slab check or a late layout change add time. Roptan confirms dates and any minimum in the quote.

The seller delivers, installs to the approved drawing, fixes footplates with the stated anchors and shims, and fits load notices. One wrong floor fixing or missing brace can weaken a run, so we ask who installs and how plumb is recorded. You receive the VAT invoice (Mushak 6.3), as-built drawing, load tables and written warranty.

What we check for this order

  • Named design codeWe check that the load tables name a design code, such as EN 15512, and match your beam spans, levels and frame height.
  • Sections against offersWe compare upright and beam sections and steel thickness across offers, so a lower price does not hide lighter steel.
  • New or traceable partsWe confirm the racking is new or, if reconditioned, that the original load data exists; without it, capacity is a guess.
  • No site weldingWe ask that beams and frames arrive as designed, with no cutting or re-welding of beam connectors on site.

Questions buyers ask

Is second-hand selective racking safe to buy?

Only with its provenance and the original load data. Without the maker's load tables the capacity is a guess and any warranty is usually void. Treat a reconditioned offer as a separate, riskier option and have every part checked for damage first.

Should a bent upright be straightened?

No. Even a minor bump can sharply reduce an upright's capacity, and UK guidance says damaged parts are replaced, not straightened or welded, since quality control on cold-formed steel is difficult. Unload the bay and order a matching upright from the seller.

What pallet size should the racking be designed for?

Every size that enters the store, not only the main one. ISO 6780 recognises six footprints, and beam length and pallet supports follow the footprint, so 1,100 x 1,100 mm pallets from Asian suppliers beside 1,200 x 1,000 mm must both be in the design.

When is very narrow aisle racking worth it?

When floor space, not height, is the limit. VNA keeps every pallet selective with narrower aisles, but its trucks run on wire or rail guidance over a flat floor, so price the floor work and the guided trucks together with the racking.

How soon will I hear back about industrial racks?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other industrial rack products

Each product type has its own page as it is published; until then its card opens the category form.

All industrial racks