Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Industrial racks

Drive in racking supplier in Bangladesh

Roptan is a drive in racking supplier in Bangladesh for stores holding many pallets of few products. Tell us the pallet, load, lane depth and forklift: we source from verified sellers, check the design code and have the seller install and anchor the lanes.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get drive in racking sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying drive in racking in Bangladesh

Drive-in racking stores pallets on rails several deep inside lanes, and the forklift drives into the lane to load and unload them. With the aisles gone, the same floor holds more pallets. It is common in cold storage, where a smaller block means less space to cool. The trade-off is access: each lane holds one product.

A drive in racking supplier in Bangladesh should design the lanes to a drive-in code and to your truck, because the forklift works inside the structure. Send the layout by form or chat: we source from verified sellers, check the design basis, guides and protectors, and arrange installation through the seller.

Kinds of drive-in and dense lane racking

Drive-in racking

One entry end, so the forklift loads and unloads from the same aisle and the last pallet in is the first out. Choose it for dense storage without strict rotation.

Drive-through racking

Entries at both ends: pallets go in at the front and leave at the rear, so a lane can run first in, first out. Choose it for goods with an expiry date or limited shelf life.

Shuttle-operated lanes

A powered shuttle moves pallets inside the lane while the forklift stays at the face. European guidance treats it as part of a machine, bringing machinery safety rules into scope.

Push-back racking

Pallets ride on wheeled carts on slightly angled rails, up to six deep, last in, first out. No truck enters the rack, which lowers the impact risk, but each position costs more.

What to send a drive in racking supplier in Bangladesh

Products and pallets per line
How many products you hold and how many pallets of each. Drive-in pays off with many pallets per product; a store of many small lines wastes lanes.
Pallet and load
Footprint, loaded height, heaviest loaded weight in kg, and the pallet type and condition.
Lane and building
Lane depth in pallets, number of levels, clear height to the lowest roof member or sprinkler, and door and column positions.
Forklift
Truck type, mast width and lift height, since the truck travels inside the lane between the uprights.
Guides and protection
Entry guides and lane guide rails that position truck and pallet, and end-frame protectors where trucks pass, written into the quote rather than added later.
Cold room or damp floor
Galvanised parts to EN ISO 1461 for cold rooms and damp floors near Chattogram or Mongla, with steel and plastic guides rated for the room temperature.
Seismic zone and anchors
Published BNBC 2020 studies place Dhaka in seismic Zone II and Chattogram in Zone III; confirm your site's zone, then ask for the seismic basis and anchor schedule in writing.

Design codes for drive-in lanes

FEM 10.2.07
The FEM design code for drive-in and drive-through racking. Name it in the enquiry, since EN 15512 and the EN 16681 seismic code both exclude drive-in racks.
EN 15620:2021
Tolerances, deformations and clearances, which now covers drive-in and drive-through racking used with industrial trucks. Rail level, plumb and clearances at handover can be checked against it.
EN 15629 and EN 15635
EN 15629 guides the buyer's written specification and names drive-in racking; EN 15635 covers application, inspection and maintenance of storage equipment.
Inspection practice abroad
UK practice: operators report damage at once, a trained person checks weekly and an expert inspects every 6 or 12 months, more often in busy stores.

What moves the price of drive-in racking

  • Density: more per pallet position than selective racking, but usually less per square metre of floor, because lanes replace aisles.
  • Steel weight: lane depth, number of levels and pallet weight set the upright and rail sections.
  • Guides and protectors: entry guides, lane rails and end-frame protectors add cost and belong in the quote.
  • Scope: design to a drive-in code, anchors and installation, which some offers leave out.

Lead times and delivery

No figure is promised here. Lanes are sized to your pallet, truck and depth, so design and fabrication come before delivery, and an imported system waits on shipping too. Deep lanes, galvanising, imported parts and a slab check usually add time. Roptan confirms dates and any minimum in the quote.

The seller delivers to your store, installs the lanes to the approved drawing, anchors each upright, sets the rails level, and fits the guides, protectors and load notices. At handover you receive the VAT invoice (Mushak 6.3), the as-built drawing, the design calculation for the lanes and the warranty in writing.

What we check for this order

  • Drive-in design codeWe check that the calculation names a drive-in code such as FEM 10.2.07, not only EN 15512, which excludes drive-in racks.
  • Guides and protectors listedWe check that entry guides, lane rails and end-frame protectors are in the quote, not left as extras.
  • Parts as designedWe ask that rails, beams and frames arrive as designed, with no cutting or re-welding on site: beam steel is often about 30 percent of its end connector's thickness.
  • Anchors and seismic basisWe check that the anchor schedule and the seismic basis for your site's zone are stated in writing, since inspectors in Bangladesh have flagged unanchored racks.

Questions buyers ask

Drive-in or drive-through racking?

Drive-in has one entry, so the last pallet in comes out first, which suits stock without strict rotation. Drive-through has an entry at each end, so a lane can run first in, first out for anything with an expiry date, but it needs an aisle at both ends.

Why is impact damage a bigger risk in drive-in racking?

The forklift travels inside the rack with a raised load. Damage at the base of a column can weaken the whole frame, and even a minor bump can sharply cut capacity. Sound pallets, entry guides and regular checks reduce the risk; damaged uprights are replaced, not straightened.

Is drive-in racking suitable for a cold store?

Usually, yes: it is common in cold rooms because a denser block leaves less space to cool. Ask for galvanised or otherwise corrosion-resistant steel, check that plastic guides are rated for the room temperature, and remember that every lane holds one product.

Can I use my current pallets?

Only if they are undamaged and of one stated type. Pallets sit on rails inside the lane, and broken boards or loose stringers can hang up on the rack and drop a load from height, so state the pallet type in the enquiry.

How soon will I hear back about industrial racks?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other industrial rack products

Each product type has its own page as it is published; until then its card opens the category form.

All industrial racks