Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Industrial racks

Cantilever racking supplier in Bangladesh

Roptan is a cantilever racking supplier in Bangladesh for long, bulky stock such as pipe, bar, profiles and timber. Tell us the longest and heaviest load and your truck: we source from verified sellers, check the capacity per arm and have the seller install it.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get cantilever racking sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying cantilever racking in Bangladesh

Cantilever racking is built from bases, vertical columns and arms that project from them, with nothing at the front to block long loads. It holds goods that are hard to palletise or longer than a pallet beam span: metal profiles, plastic pipe, steel bar, timber and boards. Light items go on by hand, heavy bundles by forklift or crane.

A cantilever racking supplier in Bangladesh should state the safe load per arm and per column for your real bundles. Send the details by form or chat: we source local or imported racking from verified sellers, compare offers on the same loads and finish, check the capacity table and arrange installation through the seller. You deal with Roptan only.

Kinds of cantilever racking

Single-sided cantilever racks

Access from one side, typically along a wall. Choose it for a store room or yard edge where the wall side would otherwise be wasted.

Double-sided cantilever racks

Arms on both sides of the columns, set in the middle of a block with an aisle either side. Choose it for larger stores with many lengths and sections.

Roofed outdoor racks

Roofing protects stock and structure from sun and rain. Choose it for a yard holding timber, rod or pipe through the monsoon; confirm the roof's wind load is in the design.

Mobile cantilever racks

Units on motorised bases that slide on rails set in the floor. Choose it only when floor space is the limit, since it needs a prepared floor and power.

Clad-rack buildings

The racks carry the stock and the walls and roof as well. It is a building design job for a structural engineer, not a rack purchase.

What to tell a cantilever racking supplier in Bangladesh

Longest and heaviest load
Length, section and weight of the longest and heaviest bundle, and the number of bundles per level, so the seller can size arms and columns.
Handling and aisle
Hand loading, forklift or crane, and the aisle width available; the handling method sets the aisle and the arm heights.
Yard or store
For yards near Chattogram or Mongla, ask for hot-dip galvanising to EN ISO 1461 and the zinc thickness, not just the word galvanised.
Stability parts
Vertical bracing between columns and arm stops at the arm ends, so bundles cannot slide off.
Upper floors
Inspection reports quote BNBC as setting a minimum of 6 kN/m2 for light storage, and heavy bar or pipe bundles can exceed a floor's design load. Send the slab's design load.
Seismic zone and anchors
Published BNBC 2020 studies place Dhaka in seismic Zone II and Chattogram in Zone III; confirm your site's zone and ask for base plates, anchors and bracing in the quote.

Design codes and checks for cantilever racks

FEM 10.2.09
The FEM design guide for cantilever racking. Name it in the enquiry: EN 15512 and the EN 16681 seismic code both state that they do not apply to cantilever racks.
EN 15620:2021
Tolerances, deformations and clearances, which now covers cantilever racking used with industrial trucks, so plumb and clearances at handover can be measured against it.
EN 15629 and EN 15635
EN 15629 guides the buyer's written specification and lists cantilever racking; EN 15635 covers application and maintenance, and bars welded changes without the supplier's approval.
Load notice and inspection abroad
UK practice fits the load notice to the column, has damage reported at once and an expert inspection every 6 or 12 months, by use.

What moves the price of cantilever racking

  • Arm length and capacity: longer, stronger arms and taller columns need more steel.
  • Layout: single or double sided, and the number of arm levels on each column.
  • Yard protection: galvanising and roofing, which an indoor powder-coated rack does not need.
  • Mobile bases and motors, where floor space forces a compact layout.
  • Scope: design, anchors and installation, which some offers leave out.

Lead times and delivery

No figure is promised here. Standard arm lengths and column heights usually ship sooner than a rack sized to one yard's bundles, and an imported rack waits on shipping too. Long arms, galvanising, a roof or mobile bases usually add time. Roptan confirms the dates and any minimum in the quote.

The seller delivers to your store or yard, installs to the approved drawing, anchors each base, fits the bracing and arm stops, and fixes the load notice to the column. Wrong floor fixings can affect the whole rack, so anchors are checked at handover. You receive the VAT invoice (Mushak 6.3), drawing, capacity table and written warranty.

What we check for this order

  • Capacity per arm and per columnWe check that the seller states the safe load per arm and per column for your bundles, not a single figure for the rack.
  • Right design codeWe check that the design names a cantilever code such as FEM 10.2.09, not only EN 15512, which excludes cantilever racks.
  • Stops and bracingWe check that arm stops and vertical bracing are in the quote and shown on the drawing.
  • Zinc thickness for yardsFor outdoor racks we ask for the zinc coating thickness and the standard it meets, not just the word galvanised.

Questions buyers ask

Cantilever or pallet racking for steel bar?

Cantilever, when the bar is longer than a pallet beam span or hard to palletise. With nothing at the front of the arms, long bundles load from the side without fouling a frame. Short lengths that sit well on pallets can still go on pallet racking.

What capacity should a cantilever arm have?

The seller works it out from your heaviest bundle, its length and how many arms share it, so this page gives no standard figure. Ask for the safe load per arm and per column on the drawing and on the load notice, and compare offers on those values.

Can cantilever racking stand outside?

Yes, as a roofed or open yard rack, if it is hot-dip galvanised and anchored. A roof keeps sun and monsoon rain off the stock and the structure, but it catches wind, so the roof's wind load must be in the design.

Can a bent arm be straightened?

No. UK guidance says damaged parts are replaced, not straightened or welded, because quality control on cold-formed steel is difficult. Unload the arm at once, report the damage and order a matching arm from the seller so the capacity table still holds.

How soon will I hear back about industrial racks?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other industrial rack products

Each product type has its own page as it is published; until then its card opens the category form.

All industrial racks