Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Conveyor belts

Screw conveyor supplier in Bangladesh

Roptan acts as your screw conveyor supplier in Bangladesh. Tell us the bulk material, rate, length and angle: we source trough, tube or shaftless screws from verified sellers, check the drive power, seals and guards, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get screw conveyors sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying screw conveyors in Bangladesh

A screw conveyor, or auger, moves bulk material by turning a helical blade, called flighting, inside a trough or tube. It usually runs level or at a slight incline, carrying grain, animal feed, aggregates, wood chips, boiler ash and wastewater solids. Because output follows shaft speed, it can also feed a measured rate into a process.

A screw quote means little until it states the material, the angle and what is included. As your screw conveyor supplier in Bangladesh, Roptan gives verified sellers one specification, checks each design basis, drive calculation, seals and guards, and delivers. The seller installs and commissions it.

Kinds of screw conveyor

Shafted trough screws

The usual form: a spiral blade coiled round a shaft, driven at one end, inside a covered trough. Choose it for grain, feed and similar bulk on level or gently rising runs.

Shaftless spiral screws

A spiral with no centre shaft, driven at one end and free at the other. Ask the seller whether a sticky or stringy material runs better on it than on a shafted screw.

Screw feeders

A screw run at controlled, variable speed, so output follows rotation. Choose it to deliver a regular, measured rate of material into a process.

Inclined and vertical screw elevators

Screws set steeply or upright to lift material in little floor space. Capacity falls quickly as the angle rises, so these are designed separately from level screws.

Tube grain augers

A screw inside a long metal tube that carries grain from a hopper up into a bin or truck. Choose it for loading and unloading grain stores.

Flexible centreless feed augers

A coreless spiral used on animal farms to carry feed from central storage to the feeders, changing height and turning angles on the way.

How to specify a screw conveyor

Material
Name the material, its particle size and moisture, and whether it is abrasive, sticky or dusty. Sellers following the US makers' standards use the CEMA 550 classification.
Capacity and duty
Give the rate in tonnes or cubic metres per hour, and say whether the screw must also meter a set rate, which calls for speed control.
Length and angle
Give the run length and angle. Capacity drops fast as a screw is tilted, and the ISO 7119 drive power method stops at 20 degrees, so steeper runs need their own design.
Housing, bearings and seals
State trough or tube, covers, inlets and discharges, and ask for hanger bearings, end bearings, seals and the thrust unit to be listed. Openings are where dust escapes and guards go.
Steel
Carbon, stainless or abrasion-resistant steel for the screw and housing. Food-contact parts are usually stainless steel 304 or 316.
Site conditions
Summer highs in Bangladesh usually reach about 38 to 41 °C, and the monsoon brings about 80 percent of the rain. Outdoor screws need covers, sealed bearings and corrosion protection.

Standards and safety rules

ISO 1050
Recommended main dimensions for the elements of screw conveyors for loose bulk materials. Old, but confirmed again by ISO in 2025.
ISO 7119
A method for calculating screw conveyor drive power, level or inclined up to 20 degrees. Ask for the calculation behind the motor size.
ANSI/CEMA 350 and ANSI/CEMA 300
The US conveyor makers' standards for screw conveyors for bulk materials and for their dimensions. Not Bangladeshi requirements, but a seller can state which one it follows.
Bangladesh Labour Act 2006, section 63
As we read the Bangla text, transmission machinery and dangerous parts must be securely fenced: on a screw, the drive, couplings, shaft ends and open inlets. Your safety officer or DIFE confirms what applies.
EN 618
The European safety standard for equipment that handles bulk materials continuously, other than fixed belt conveyors. Not a Bangladeshi requirement; ask the maker of a CE-marked import whether it was built to it.

What moves the price of a screw conveyor

  • Screw diameter and length, and the type and thickness of the flighting.
  • Shafted or shaftless screw, in an open trough or a closed tube.
  • Steel for the screw and housing: carbon, stainless or abrasion-resistant.
  • Hanger bearing type and spacing, end seals and dust covers.
  • Drive power, and a variable speed drive where the screw meters material.

Lead times and delivery

We found no reliable published lead time or minimum order for screw conveyors, so we give no figure. A common trough screw built locally usually comes sooner than a stainless, shaftless or vertical unit, or one imported to order. Roptan confirms dates and any minimum in the quote.

We deliver to your plant anywhere in Bangladesh. The seller sets and aligns the screw, connects the drive and commissions it with your material. At handover, ask for the design basis in writing (material, capacity and incline), the drive power calculation, the warranty, a VAT invoice (Mushak 6.3) and, for a CE-marked import, its declaration under the EU machinery rules.

What we check for this order

  • Drive power calculationWe check the motor size against the seller's drive power calculation, by ISO 7119 or the standard the seller names, for your material and angle.
  • Free runningWe ask for a run at the stated speed and check that the flighting turns freely without rubbing the trough or tube.
  • Dust sealsWe check the seals at inlets, discharges and end bearings, where dust escapes from a screw conveyor.
  • Guards and stopsWe check that covers, inlet guards and emergency stops are fitted and work before handover.

Questions buyers ask

How steep can a screw conveyor run?

It can run inclined, an economical way to lift and convey when space allows, but capacity falls quickly as the angle rises. The ISO 7119 drive calculation stops at 20 degrees, so ask for a separate design and a stated capacity for anything steeper or vertical.

Can a screw conveyor feed a measured rate?

Yes. The volume moved is proportional to shaft speed, so a screw is often used as a variable rate feeder. Ask for a variable speed drive, and for the seller to state the rate at minimum and maximum speed with your material.

Shafted or shaftless: which do I need?

Shafted screws are the usual type; makers also build shaftless spirals, driven at one end and free at the other. Send the seller a sample and a description of your material, and ask in writing which type it proposes and why.

What should a screw conveyor quote list?

The screw with flighting and shaft, hangers and hanger bearings, the trough or tube with ends, feet, covers, inlets and discharges, end bearings, seals, thrust unit and drive. Name the design standard too: ISO 7119 or CEMA, neither a Bangladeshi requirement, but checkable.

How soon will I hear back about conveyor belts?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other conveyor belt products

Each product type has its own page as it is published; until then its card opens the category form.

All conveyor belts