Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Conveyor belts

Roller conveyor supplier in Bangladesh

Use Roptan as your roller conveyor supplier in Bangladesh. Give us your item sizes, weights, rate and layout: we source gravity or powered roller lines, check that they carry your real items and deliver them to your floor.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get roller conveyors sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying roller conveyors in Bangladesh

A roller conveyor moves unit loads, such as cartons, totes, crates and pallets, on a bed of rollers, pushed by gravity or driven by a motor. In Bangladesh it runs in packing and dispatch sections, warehouses and distribution centres. Recorded exports of conveyors are small, so the buyers are mainly local plants and warehouses.

A roller conveyor supplier in Bangladesh can quote rollers by the metre without asking what rides on them. Tell us the goods by form or chat. We source from a vetted seller, have it set the roller size, spacing and drive against your smallest and heaviest item, check the line with your goods and deliver; the seller installs it.

Kinds of roller conveyor

Gravity roller conveyors

Unpowered rollers on a slight slope, or pushed by hand. Choose them for short runs, packing tables and buffers where no drive is needed.

Lineshaft roller conveyors

One shaft under the rollers drives each roller through an elastic polyurethane belt, and the spools slip so items can queue. Usually for light loads up to about 50 kg, such as cartons and totes.

Motor driven roller (MDR) conveyors

A brushless DC motor inside one roller drives a few idle rollers to form a zone, and zones run end to end. A zone usually handles cartons up to about 35 kg and can stop on its own.

Chain driven live roller conveyors

Rollers driven by chain from a motor, for large, heavy loads moved in one or both directions. Choose them for pallets, drums and heavy crates.

Pallet accumulation conveyors

Heavy roller lines, usually for loads from about 230 kg, powered through a mechanical clutch so pallets can wait in line.

What a roller conveyor supplier in Bangladesh needs from you

Smallest and largest item
Each item should usually sit on at least three rollers. Rollers can be as small as 17 mm in diameter and 18.5 mm apart, so very short items usually belong on a belt.
Bottom of the load
Soft-bottomed loads such as cement bags sag between rollers and go on a belt instead. Say what the base of each item is: carton, crate, tote or pallet.
Weight and rate
Item weight and items per hour set the drive type, roller size and frame. Heavier loads and longer runs usually need larger steel rollers.
Roller size and material
Unit-load rollers usually run from about 16 to 89 mm, in galvanised steel, stainless steel or PVC. Stainless suits wet, washdown and humid monsoon areas.
Accumulation and zones
Say where items must queue or stop, and whether the line feeds a machine. That decides between gravity, lineshaft, MDR and clutch-driven types.
Noise
Tube material, bearing type and speed set the noise; sleeve or precision ball bearings are often used where low noise matters.
Layout
Length, curves, transfers, end heights and a floor drawing, so the seller can place drives, guards and stops.

Standards and papers for a roller conveyor

ANSI/CEMA 401, 403, 404, 406 and 407
US roller conveyor standards: 401 non-powered, 403 belt driven, 404 chain driven, 406 lineshaft, 407 motor driven. Not Bangladeshi rules, but a seller should name what it designs to.
EN 619
European safety standard for equipment moving unit loads on a fixed route, now a 2022 edition. A maker citing the 2003 edition cites a withdrawn text.
EU machinery rules
CE marking on an imported line rests on Directive 2006/42/EC until Regulation (EU) 2023/1230 applies from 14 January 2027. Ask for the declaration of conformity.
Bangladesh Labour Act 2006
As we read the Bangla text, section 63 requires transmission machinery and every dangerous part of a machine to be securely fenced. Your safety officer and DIFE confirm what applies to drives and chains.

What moves the price of a roller conveyor

  • Drive type: gravity has none; lineshaft and chain lines need a shaft or chain and a motor; MDR needs a motor in each zone.
  • Controls: sensors, zone logic and accumulation add cost over a line that simply runs.
  • Roller diameter, length, material and coating, and how closely the rollers are spaced.
  • Bearings and seals, including low-noise or washdown types.
  • Frame finish: painted, galvanised or stainless steel.

Lead times and delivery

No fixed time applies to every roller line. It is usually shorter for gravity sections built from standard rollers, and longer for imported motor rollers and controls, stainless frames, curves and transfers, or a layout that needs several drawing rounds. Roptan confirms dates and any minimum order in the quote.

We deliver the sections to your floor anywhere in Bangladesh. The seller installs and levels the line, connects drives to the three phase, 50 Hz supply, sets up the zones and runs it with your goods. Papers: layout drawing, roller datasheet, electrical drawings, the standard the line is built to and a VAT invoice (Mushak 6.3). An imported roller conveyor falls under HS 8428.39.

What we check for this order

  • Your goods on the lineWe have the line run with your real items, not empty, and check that the smallest sits on at least three rollers.
  • Queueing and stopsOn powered types we check that items accumulate as the layout says and stop where they should.
  • Roller spin and noiseWe check that rollers turn freely and run quietly, by hand and with the line moving.
  • Guards and stopsWe check guards over drives and chains, the emergency stops, and that the safety papers come with the line.

Questions buyers ask

Should I choose gravity or powered rollers?

Gravity suits short runs, packing tables and buffers where people push or a slope does the work. Choose a powered type when the line must move, queue or space items itself, or feeds a machine.

Can a roller conveyor carry sacks or cement bags?

Not well. Soft-bottomed loads sag between rollers, so sacks and bags usually go on a belt conveyor. Rollers suit firm bases such as cartons, totes, crates and pallets.

How heavy a load can a roller conveyor take?

It depends on the type. Lineshaft lines usually take up to about 50 kg and an MDR zone about 35 kg; heavy-duty lines for about 230 kg and above use chain driven or clutch-driven rollers. Give the seller your heaviest item.

Why do sellers call the same line by different names?

Live roller, powered roller and roller bed can mean the same thing. Compare quotes by drive type, roller size and spacing, zones and frame, or ask each seller to use the ANSI/CEMA 102 conveyor terms.

How soon will I hear back about conveyor belts?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other conveyor belt products

Each product type has its own page as it is published; until then its card opens the category form.

All conveyor belts