Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Conveyor belts

Modular belt conveyor supplier in Bangladesh

Roptan works as your modular belt conveyor supplier in Bangladesh. Tell us the product, the line layout and the cleaning routine: we source the belt and conveyor from verified sellers, check the module series and food-contact papers, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get modular belt conveyors sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying modular belt conveyors in Bangladesh

A modular belt is built from rigid plastic modules joined at hinge joints and driven by sprockets rather than a smooth pulley. Width and length change by adding or removing modules, and one broken module is swapped without replacing the belt. It is the usual belt where product is washed, cooled, carried wet or turned through curves.

Three things must match on this belt: the module series, the plastic and the food-contact papers. As your modular belt conveyor supplier in Bangladesh, Roptan sources from verified sellers, checks series, pitch, material and declarations against your order, and delivers. The seller installs and commissions the line.

Kinds of modular belt

Flat top belts

A closed, even surface for packs, bottles and packaged goods. Choose it when items need continuous support and nothing should drop through.

Flush grid belts

An open mesh that lets water, air and small particles through, with no pockets for build-up. Choose it for washing, draining and cooling meat, poultry, seafood or produce.

Grip top and raised rib belts

A non-slip texture moulded into the module, or ribs that hold and guide product. Choose one for inclines, wet product and keeping items in line.

Roller top belts

Rollers built into each module let items be pushed or diverted sideways. Choose it for case packing, side transfers and accumulation without line pressure.

Radius and spiral belts

Side-flexing belts for curves, and spiral belts that climb in tiers through freezers, coolers and proofers. Choose one when the line must turn or rise in a small area.

How to specify a modular belt conveyor

Product and load
State size, weight per item, packed or loose, wet or dry, the rate per hour, and any curves or inclines. Small items usually call for a finer pitch.
Pitch and module series
Pitch is the distance between hinge points: smaller pitches allow tighter transfers, larger ones carry heavier goods. Pitch families differ between makers, so name the series, not only the width.
Plastic
Acetal is usually chosen for food processing, polypropylene where heat or chemicals go beyond acetal's limits, and polyethylene for frozen food. Ask for the datasheet temperature range of the exact belt.
Cleaning and chemicals
Give the cleaning method, chemicals, wash temperature and any sunlight exposure. 'Food grade' alone does not tell the seller which plastic survives your wash.
Frame and contact parts
The belt runs on sprockets and wear strips that guide and support it. Food-contact parts are usually stainless steel 304 or 316: state the grade.
Site conditions
Summer highs in Bangladesh usually reach about 38 to 41 °C and monsoon air is very humid. For wet rooms and open sheds, ask for sealed bearings and damp-proof drives.

Food-contact rules and safety standards

Regulation (EC) No 1935/2004 and (EU) No 10/2011
The EU food-contact framework and its rules for plastics, with an overall migration limit of 10 mg per dm². Ask for a written declaration of compliance for the exact plastic.
21 CFR 177.1520 and 177.2470
US food-contact rules for olefin polymers, including polypropylene and polyethylene, and for acetal copolymer. An 'FDA approved' belt should name the section and resin grade.
EN 619:2022
The European safety standard for conveyors moving unit loads such as cartons and totes. Not a Bangladeshi requirement; its 2003 edition is withdrawn.
Bangladesh Labour Act 2006, section 63
As we read the Bangla text, transmission machinery and dangerous parts must be securely fenced: here, sprockets, shafts and return nips. Your safety officer or DIFE confirms what applies.

What moves the price of a modular belt conveyor

  • The plastic: acetal, polypropylene and polyethylene differ in cost, and anti-static grades usually add to it.
  • The module series and pitch, so like-for-like quotes must name the same series.
  • The surface: roller top, side-flexing and spiral belts are specialist types.
  • Belt width and length, flights or sidewalls, and the curves and transfers in the layout.
  • Sprockets, wear strips, the drive and the frame, above all stainless steel.

Lead times and delivery

We found no reliable published lead time or minimum order for modular belts, so we give no figure. A stocked series and width usually arrives sooner than a spiral belt, a special plastic or a stainless conveyor built to your drawing and shipped by sea. Roptan confirms dates and any minimum in the quote.

We deliver to your plant anywhere in Bangladesh. The seller installs the conveyor and runs it loaded before handover. Ask for the series and pitch in writing, the declaration of compliance, spare modules, a VAT invoice (Mushak 6.3) and, for an imported CE-marked machine, its declaration under the EU machinery rules.

What we check for this order

  • Series, pitch and plasticWe check the delivered modules against the order, because spares and sprockets must match by series and pitch, not width.
  • Declaration for the right ruleWe check the declaration names the belt's exact plastic and, for EU-bound food, Regulation (EU) No 10/2011 as well as 1935/2004.
  • Loaded and washed runWe ask the seller to run the belt loaded and through your washdown, and check that it tracks on sprockets and wear strips.
  • Spares in the same seriesWe check spare modules, rods and a spare sprocket of the same series are on the packing list.

Questions buyers ask

Can I fit modules from another maker to my belt?

Usually not, unless they share the same pitch and series design. Pitch families differ between makers, so modules of the same width can have different hinge spacing. Send a sample module and the seller matches it.

Is an 'FDA approved' belt enough for a food line?

Not on its own: the phrase is a seller's claim. Ask which rule the resin meets, such as 21 CFR 177.2470 for acetal copolymer, and for a written declaration of compliance. For food exported to the EU, the belt should also be declared to Regulation (EU) No 10/2011.

Which plastic suits a freezer or cold room?

Usually polyethylene, which performs better at low temperatures than acetal or polypropylene. Published temperature limits differ between makers and compounds, so ask for the datasheet range of the exact belt and compare it with your product and cold room temperature.

Why choose a modular belt over a smooth belt for washdown?

Sprockets engage a modular belt positively, so it does not slip on a wet drive the way a smooth belt can on a pulley, and an open grid drains. Keep sprockets and belt clean, since dirt affects tracking.

How soon will I hear back about conveyor belts?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other conveyor belt products

Each product type has its own page as it is published; until then its card opens the category form.

All conveyor belts