Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Conveyor belts

Belt conveyor supplier in Bangladesh

Roptan is a belt conveyor supplier in Bangladesh for bulk and packing lines. Tell us the load, capacity, length and lift: we source the conveyor or belt, check it against the batch certificate and deliver it to site.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get belt conveyors sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying belt conveyors in Bangladesh

A belt conveyor carries material on an endless belt driven round pulleys. There are two classes: bulk handling, where tilted idlers bend the belt into a trough for stone, clinker, coal or grain, and unit handling, where a flat belt moves cartons and bags. Recorded exports are small, so the buyers are mainly plants, mills and warehouses in Bangladesh.

A belt conveyor supplier in Bangladesh may quote a belt by width and rating alone. Tell us the duty by form or chat. We source from a vetted seller, get the belt designation and tension calculation in writing, check the certificate and your pulleys, and deliver; the seller erects the conveyor and joins the belt.

Kinds of belt conveyor

Troughed belt conveyors

Angled side idlers bend the belt into a trough that keeps loose material on it. Choose it for clinker, stone, coal, sand and grain on level runs and gentle slopes.

Flat belt conveyors

A flat belt, usually light PVC or PU, over a slider bed for light, even loads such as cartons, or over a roller bed, which cuts friction, for heavier crates and sacks.

Cleated or chevron belt conveyors

Moulded cleats hold aggregates, grain, sand and fertiliser on an incline. An open V pattern usually sheds wet, sticky material better, which matters in the monsoon.

Sidewall, pipe and sandwich conveyors

For steeper lifts: sidewall belts with corrugated edges and cross cleats, pipe conveyors for sharp bends and up to about 35 degrees, sandwich belts up to 90 degrees.

What a belt conveyor supplier in Bangladesh needs from you

Bulk or unit load
For bulk: material, tonnes per hour, lump size and moisture. For unit loads: the smallest and largest item with weights. The class sets the belt, bed and calculation.
Belt designation
One written line, such as 1000 EP 630/4 6/2 Y: 1,000 mm wide, polyester and nylon carcass of 630 N/mm, four plies, 6 mm top and 2 mm bottom cover, grade Y.
Cover grade
E antistatic, K or S antistatic and flame retardant, T heat, R cold, G oil and fat, C chemical. Their test values are agreed with the maker, so write them down.
Troughing angle
Usually 20, 30, 35 or 45 degrees on three-roll sets. A deeper trough carries more but needs a more flexible carcass.
Cleat height
Usually 15, 25 or 32 mm, matched to lump size and slope. Cleats add no strength: size the carcass as for a flat belt.
Pulleys and site
Existing pulley diameters, the splice method, and power and cooling water for the press. Summer highs usually reach 38 to 41 degrees C and the monsoon is long: cover outdoor runs and seal the bearings.

Standards a belt conveyor quote should name

DIN 22101 or ISO 5048
Methods for drive power and belt tension on a conveyor with carrying idlers. The carcass rating should come from this calculation sheet.
ISO 14890 and ISO 15236-1
Textile carcass belts, now in a 2026 edition, and steel cord belts for long or high-tension runs. Thin PVC and PU belts fall under ISO 21183-1.
ISO 340, ISO 284 and EN 12882
Flame and conductivity tests, and the European safety requirement built on them for belts used above ground. Ask for results with antistatic or flame retardant covers.
Bangladesh Labour Act 2006
As we read the Bangla text, section 63 requires transmission machinery, defined to include drums, pulleys and driving belts, to be securely fenced. Your safety officer and DIFE confirm what applies.

What moves the price of a belt conveyor

  • Carcass rating and plies: a higher rating means more fabric or steel cord.
  • Cover thickness and compound: antistatic, flame retardant, heat or oil grades usually cost more than a plain cover.
  • Belt width and length, which set the metres of belt, the idler count and the steel in the frame; cleats or sidewalls usually add more.
  • Joint and site work: a hot splice needs a press, a trained team, power and water.

Lead times and delivery

No fixed time applies to every belt conveyor. It is usually shorter when belting in your width and rating is held in Bangladesh and the frame is built locally, and longer for imported or steel cord belts, special covers, cleated or sidewall profiles, or drawings that need several rounds. Roptan confirms dates, and any minimum belt length, in the quote.

We deliver the conveyor or belt rolls to your site anywhere in Bangladesh. The seller erects the frame, joins the belt and commissions the line. A hot splice on a textile belt usually runs at about 142 degrees C and 10 bar, curing 2.5 minutes per mm of thickness, so arrange power with an electrician, cooling water and a tent. Papers: calculation sheet, belt certificate, splice record and a VAT invoice (Mushak 6.3).

What we check for this order

  • Designation against certificateWe match the written belt line to the maker's batch certificate; a designation alone is not a test result.
  • Calculation behind the ratingWe check the carcass follows from the tension calculation, since breaking strength is not safe working tension.
  • Pulley diametersFor a replacement belt we compare the maker's minimum pulley diameter with your pulleys.
  • Splice planWe confirm who joins the belt, how, and that power, water and shelter are ready.

Questions buyers ask

Is a higher-rated belt always the safer choice?

No. A rating is breaking strength, not working tension: an EP 500 belt 800 mm wide has a total rated breaking strength of 400 kN, but the safe load depends on the calculation, the splice and the safety factor. A thicker belt may also need larger pulleys.

Which belt suits a carton or bag line?

A light PVC or PU belt, which follows the light belt standards rather than the heavy textile ones. Give the seller item sizes, weights and the rate per hour, and they choose a slider or roller bed to suit.

Why does a new belt wander in its first weeks?

A new belt usually needs a couple of weeks to run smoothly. The seller should run it empty and slowly first, then at normal speed, adjusting tracking as it settles. If it still wanders, call the seller back.

Do ISO and DIN belt markings mean the same thing?

Not by name alone. State the standard and edition in your purchase specification, and ask for a compliance and deviation schedule for the actual belt. A designation is not a test certificate.

How soon will I hear back about conveyor belts?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other conveyor belt products

Each product type has its own page as it is published; until then its card opens the category form.

All conveyor belts