Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Machine tools and metalworking machines

Milling and drilling machine supplier in Bangladesh

Tell us what you cut: faces, slots, pockets or only holes. As your milling and drilling machine supplier in Bangladesh, Roptan sources knee, bed and radial machines from verified sellers, checks them and delivers.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get milling and drilling machines sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying milling and drilling machines in Bangladesh

A milling machine moves the work under a rotating cutter to make flat faces, slots, pockets and hole patterns; a drilling machine drives a drill straight down its spindle axis to make holes. Toolrooms, spare parts makers, fabricators and maintenance shops in Bangladesh often need both. A milling and drilling machine supplier in Bangladesh should ask what features your parts carry before naming a machine.

Mills and drills reach Bangladesh as imports, and a bare quote rarely states the spindle taper, tooling or test sheet. Roptan writes those into one specification, sources from verified sellers, checks a trial part and delivers. The seller installs the machine.

Kinds of milling and drilling machine

Vertical knee-and-column mills

The table rides on a knee that moves up and down under a downward spindle. The turret version is versatile but somewhat less rigid. Choose it for toolroom and repair work.

Horizontal and universal mills

A horizontal spindle carries arbor cutters for slotting and for cutting several faces in one set-up. A universal mill takes either spindle. Choose one when parts need side faces or deep slots.

Bed mills and machining centres

A bed mill rests its table on a stout bed, so it is generally more rigid than a knee mill. A machining centre adds CNC and a tool changer. Choose these for heavy cuts and batches.

Pillar and floor drilling machines

The spindle moves along a column above an adjustable table, on a bench or the floor. Choose one for drilling, tapping and reaming parts small enough to move by hand.

Radial drilling machines

The spindle sits on an arm that swings and slides, so several holes are drilled without moving heavy work. Choose one for flanges, plates and large castings.

Magnetic-base drilling machines

A portable drill that clamps to steel with an electromagnet and usually runs annular cutters of roughly 12 to 200 mm. Choose one for site fabrication and repair on beams and plate.

How to brief a milling and drilling machine supplier

Mill or drill
If the part needs flat faces, slots or pockets, or holes placed to a tight pattern, you need a mill. Holes alone, drilled, tapped or reamed, suit a drilling machine.
Part size and features
Send a drawing with material, hardness, faces and features, tolerance and monthly quantity. These set table size, axis travel, spindle power and the number of axes.
Spindle taper
State SK (ISO) or HSK, and fix it before buying cutters and holders. Other taper styles look alike and are easy to confuse, and holders fit only one.
Holes: diameter and depth
Give the largest hole diameter and depth. Deep holes may need gun or BTA drilling; on CNC a peck cycle clears swarf once depth reaches about three diameters.
Supply protection
Voltage swings and outages are common on industrial estates. Ask the seller what supply range the control and drives tolerate and what protection and earthing they need; a manual mill or drill is less exposed.

Acceptance and safety standards

ISO 1701 and ISO 1984
Acceptance tests for manual milling machines: ISO 1701-1 and -2:2004 with a table of variable height, ISO 1984-1 and -2:2001 with a fixed-height table.
ISO 2773:2024, ISO 2772:2019, ISO 2423:1982
Acceptance tests for pillar type vertical drills, box type vertical drills and radial drills with an arm adjustable in height.
ISO 10791 series
Test conditions for machining centres in ten parts, including Part 2:2023 geometry with a vertical spindle and Part 7:2020 finished test pieces.
ISO 16090-1:2022
Safety of machining centres, milling machines and transfer machines, covering knee and column mills as well as numerically controlled machines.

What moves the price of a milling and drilling machine

  • Table size and axis travel, which set the weight of the castings.
  • Spindle power, speed range and taper size on the machine.
  • Manual or CNC, and the number of axes on a CNC machine.
  • A tool changer, and the number of tools its magazine holds.
  • Closed-loop feedback, which costs more than open-loop control but is more accurate.
  • Accessories such as a vice, rotary table, power drawbar and coolant system.

Lead times and delivery

Lead times vary: a manual mill or drill held in Bangladesh moves soonest. An imported machine adds the maker's build time, sea freight and release at Chattogram port, and CNC machines usually take longer. Ask whether a quote means dispatch only. Roptan confirms the date and any minimum in the quote.

We deliver anywhere in Bangladesh. A floor mill or radial drill needs lifting gear and a level floor; a magnetic drill arrives ready to carry. The seller installs and levels the machine. You receive the test sheet, manuals, a spare parts list, the written warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Trial partWe have the machine cut a sample of your part and check it against the drawing.
  • Test sheet and serialWe match the ISO acceptance sheet for that machine type to the serial plate, not a brochure figure.
  • Runout and table flatnessWe check spindle runout and table flatness after levelling, since lifting and transport can disturb them.
  • Taper and holdersWe confirm the spindle taper and the tool holders supplied match the order before you buy more tooling.

Questions buyers ask

Do I need a milling machine or a drill press?

A drill press only drives the tool along its spindle axis, so it makes holes. If your part needs flat faces, slots, pockets or holes positioned precisely to each other, you need a mill, which moves the work under the cutter. Many shops keep both.

Vertical or horizontal milling machine?

Vertical suits work cut from one face with end mills, which covers most toolroom and repair jobs. Horizontal suits slotting and cutting several faces in one set-up. The choice usually rests on the part's shape and how many sides need machining.

What is a magnetic drill used for?

Drilling steel where the work cannot go to a machine: beams, columns, plates and ship structures. The electromagnet holds the drill to the steel, and it usually runs annular cutters of roughly 12 to 200 mm on a clean, flat surface.

How are deep holes drilled?

With care to clear swarf. On a CNC machine a peck cycle backs the drill out at intervals, used once depth reaches about three times the drill diameter. Very deep, straight holes need gun drilling or BTA drilling, which differ in how coolant enters and chips leave.

How soon will I hear back about machine tools and metalworking machines?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other machine tools products

Each product type has its own page as it is published; until then its card opens the category form.

All machine tools and metalworking machines