Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Machine tools and metalworking machines

Lathe machine supplier in Bangladesh

Send the largest diameter, the longest part and the material you turn. As your lathe machine supplier in Bangladesh, Roptan sources engine, turret, vertical and CNC lathes from verified sellers, checks a trial part and delivers.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get lathe machines sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying lathe machines in Bangladesh

A lathe spins the workpiece against a fixed cutting tool to make shafts, bushes, pins, flanges and threaded parts. Repair shops, spare parts makers, shipyards and maintenance teams in Bangladesh buy them. A lathe machine supplier in Bangladesh should start from your parts: repair work needs a flexible engine lathe, while a batch of identical bushes calls for a turret or CNC lathe.

Lathes are mostly imported, and a quote often lists a model with no word on chucks, change gears or spares. Roptan turns your part sizes, threads and output into one specification, sources from verified sellers, checks the test sheet and a trial part, and delivers.

Kinds of lathe

Engine lathes

The general-purpose metalworking lathe, with a lead screw and gear train for cutting threads. Choose it for repairs, one-off parts and short runs where the job changes often.

Turret (capstan) lathes

An indexing toolholder lets several cuts follow each other without resetting tools. Choose it for repeat batches of duplicate parts. Versions run from manual and semi-automatic to cam automatic and CNC.

CNC lathes and turning centres

Usually built with an inclined or vertical bed so swarf falls clear, and turrets that typically hold several tools each. Choose one for repeat parts, tapers and profiles that a manual lathe makes slowly.

Vertical lathes

Also called vertical turret lathes or boring mills: the work sits on a horizontal rotating table. Choose one for large, heavy, short parts such as flanges and wheels that hang badly in a chuck.

How to brief a lathe machine supplier in Bangladesh

Swing, and which swing
Sellers usually quote swing as the largest diameter the lathe can turn; some quote centre height, which is half of it. Ask whether it is over the bed or over the cross-slide, which is smaller.
Length between centres
Give the longest part you turn between centres. This sets the bed length and much of the machine's weight.
Spindle bore for bar work
If you feed bar stock through the spindle, the bore must be larger than your biggest bar. Oilfield lathes have a very large bore and a chuck at each end.
Workholding
Name the holders: a three-jaw chuck for round work, a four-jaw independent chuck for irregular work, collets for precision work, centres for long work.
Thread cutting
Ask for a screw-cutting gear train or lead screw if you cut threads, and state metric, inch or both so the change gears supplied match.
Typical part and quantity
Send a drawing with material, hardness, tolerance and finish, and the monthly quantity. These decide spindle power and whether CNC pays back over a manual lathe.

Standards and test sheets for lathes

ISO 1708:1989
The accuracy acceptance test for general purpose parallel lathes, the manual centre lathe. Ask for the completed sheet for your machine.
ISO 13041 series
Test conditions for numerically controlled turning machines and turning centres, in eight parts, including geometry, axis positioning and a finished test piece.
ISO 230-2:2014
Determines accuracy and repeatability of positioning of numerically controlled axes. Ask for the report for your CNC lathe's serial number.
ISO 23125:2015
The safety standard for turning machines. It is the current edition, with a revision in progress; ask which edition the machine follows.

What moves the price of a lathe machine

  • Swing and bed length: a bigger lathe needs heavier castings, a bigger spindle and more power.
  • Manual or CNC, and for CNC the number of axes and tool stations on the turret.
  • Feedback: closed-loop control costs more than open-loop control, which is cheaper but less accurate.
  • Accessories such as extra chucks, steadies and a taper attachment, often priced apart from the bare lathe.
  • Service: installation, operator training, spares held locally and the warranty period.

Lead times and delivery

A lathe a seller already holds in Bangladesh moves soonest. An imported lathe adds the maker's build time, sea freight and release at Chattogram port, and CNC or non-standard sizes usually take longer. Ask whether a quoted time is for dispatch or for delivery to you. Lead times vary by seller and model, so Roptan confirms the date and any minimum in the quote.

We deliver anywhere in Bangladesh. The site needs lifting gear, clear access and a level floor or foundation. After the seller levels the lathe, spindle runout and bed alignment are measured on site, because transport can disturb them. You receive the test sheet, manuals, a spare parts list, the written warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • A trial part to your drawingWe have the machine turn a sample of your part and check it against the drawing tolerance before you sign acceptance.
  • Test sheet against serial numberWe match the ISO 1708 sheet, or the ISO 13041 and ISO 230-2 reports for CNC, to the serial plate on the lathe.
  • What is in the crateWe check that the chucks, change gears, tool posts and steadies listed in the quote are actually delivered.
  • Wear parts in reachWe ask who holds wear parts and service engineers in Bangladesh, since a part ordered from abroad can stop a machine for weeks.

Questions buyers ask

Engine lathe or turret lathe: which suits my work?

An engine lathe suits varied work: repairs, one-off shafts and short runs, with threads cut from the lead screw. A turret lathe suits batches of one part, because its indexing toolholder runs the cuts in order without resetting. Send a typical part and monthly quantity and we compare both.

Is a manual lathe still worth buying?

Often, yes. CNC has replaced manual lathes to a large extent but not completely. For repairs, single parts and changing jobs, a manual lathe with a skilled operator is usually quicker to set up. A CNC lathe pays back on repeat parts and profiles.

What swing and length should I order?

Start from your largest diameter and longest part, then add a margin for chucks and tooling. Check which swing the quote gives, over the bed or over the cross-slide: a part that clears the bed may still foul the cross-slide.

Can I buy a used or reconditioned lathe through Roptan?

Where a seller offers one that fits, yes, and we check its condition and papers. Import rules for second-hand machinery change from time to time, so confirm the current terms with your importer or clearing agent first. A used lathe should still turn a trial part to your drawing.

How soon will I hear back about machine tools and metalworking machines?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other machine tools products

Each product type has its own page as it is published; until then its card opens the category form.

All machine tools and metalworking machines