Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Machine tools and metalworking machines

Induction heating machine supplier in Bangladesh

Send the part, the steel grade and the case depth or joint you need. As your induction heating machine supplier in Bangladesh, Roptan sources hardening, brazing and fitting heaters from verified sellers, checks a trial run and delivers.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get induction heating machines sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying induction heating machines in Bangladesh

An induction heating machine passes alternating current through a coil, which sets up eddy currents inside the metal part so it heats from within, fast and without contact. Spare parts makers, repair shops, toolmakers and maintenance teams in Bangladesh use it to harden shafts and gears, braze joints and heat parts to fit. An induction heating machine supplier in Bangladesh should begin with your part.

The machine, coil and quench are matched to one part, so a catalogue model rarely fits as it is. Roptan writes your part, steel and result into one specification, sources from verified sellers, checks a trial run on your own part, and delivers. The seller installs the unit and trains your operators.

Kinds of induction heating machine

Single-shot hardening machines

The part is held or rotated in the coil, the whole area is heated at once for a set time, then quenched. Choose one for flat faces and complex shapes that fit inside one coil.

Traverse (scanning) hardening machines

The part passes through the coil with a quench spray following behind. Choose one for long shafts such as axle shafts, drive shafts and pins.

Induction brazing machines

The coil heats only the joint, giving uniform, repeatable results. Choose one for production runs, such as brazing carbide to a steel shaft.

Bearing and fitting heaters

Heat a bearing or gear so it expands before it is fitted to a shaft. Bearing heaters usually run at mains frequency, 50 Hz, with a laminated steel core passed through the bearing.

Induction melting furnaces

A water-cooled copper coil surrounds a refractory crucible to melt metal, the method most modern foundries use. A furnace is a separate product from a heating machine, so say which you mean.

How to specify an induction heater

Part and steel grade
Send the part drawing and the steel grade. Medium carbon and low-alloy steels suit induction hardening, and carbon and alloy content decide the hardness and cracking risk on quench.
Case depth and frequency
Hardening systems typically run anywhere from 1 kHz to 400 kHz, and the lower the frequency, the deeper the case. Give the depth and hardness you need, not a frequency.
Power and heating time
Power is sized from the surface area to be heated, the power density and the heating time. Several combinations can give one result, so it is usually set by trial on a sample.
Coils
Coils are usually copper tubing carrying coolant, and each part shape often needs its own. Ask who designs and supplies coils, and how long a new one takes.
Cooling and quench
State the quench (spray, ring, flood or drop) and ask for the coolant flow, water quality and chiller capacity the unit needs.
Power supply
The unit is a high-power converter. Ask for its kVA draw and the supply swing it tolerates, and how it behaves if power fails mid-cycle, since load shedding is common on industrial estates.

Safety standard and trial papers

IEC 60519-3:2005
Safety in electroheat installations: particular requirements for induction and conduction heating and induction melting installations. Ask for the maker's declaration of conformity to it.
Hardness and case depth on the trial part
Surface hardness on your trial part to ISO 6508-1:2023 (Rockwell) or ISO 6507-1:2023 (Vickers), with the case depth, from a laboratory or a calibrated tester. Accreditation to ISO/IEC 17025 makes the figures easier to trust.

What moves the price of an induction heating machine

  • Power rating in kW and the frequency range of the generator.
  • The number and kind of coils, since inductors made for one part are expensive.
  • The chiller and the quench system that come with the unit.
  • Part handling: a traverse mechanism with its own controller costs more than a fixed coil.
  • For a melting furnace, the capacity of the crucible it holds per melt.
  • Service: spares for the power electronics, coil repair and operator training.

Lead times and delivery

Lead times vary by seller and by how standard the job is. A stock heater with a ready coil moves soonest. A new part adds coil design and manufacture and a trial heat on samples before the settings are fixed. An imported unit also adds sea freight and release at Chattogram port. Roptan confirms the date and any minimum in the quote.

We deliver anywhere in Bangladesh. The site needs a supply sized for the unit, a cooling water circuit or chiller, and drainage for the quench. The seller installs the unit, sets up the coil, runs the trial on your parts and trains operators. You receive the trial report, manuals, a spares list for the power unit and coils, the written warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Trial on your partWe have a trial run on your own part, with case depth and hardness measured, before acceptance.
  • Cooling under loadWe check that coolant flow and temperature are logged while the unit runs at working power.
  • Coils and fixturesWe check that the coils and fixtures listed in the quote are delivered and fit your parts.
  • Earth and interlocksWe check the protective earth and the safety interlocks on the power unit and the coil station.

Questions buyers ask

What frequency do I need?

It depends on the part's size and material, how well it couples to the coil and the case depth you need. Lower frequency heats deeper. Give the seller the part, the depth and the hardness, and ask for a trial on a sample; more than one setting can give the same result.

Why does every part need its own coil?

The coil must sit close to the surface it heats, so a coil that suits one shaft rarely suits a gear. Dedicated coils limit flexibility and add cost, which is why you should list all the parts you plan to treat and ask which coils can be shared.

Can it heat bearings for fitting?

Yes, that is a common use. A bearing heater expands the bearing so it slides onto the shaft without force. These heaters usually work at mains frequency, 50 Hz, with a steel core through the bearing, and are simpler than a hardening machine.

Hardening machine or melting furnace?

They are different products. A hardening or heating machine treats finished or part-finished pieces; a melting furnace melts metal in a refractory crucible for casting. Tell us which you need, the part or the melt size, and the metal, and we source the right one.

How soon will I hear back about machine tools and metalworking machines?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other machine tools products

Each product type has its own page as it is published; until then its card opens the category form.

All machine tools and metalworking machines