Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Forklifts

Stacker supplier in Bangladesh

Looking for a stacker supplier in Bangladesh? Tell us the pallet, the heaviest load and the highest rack beam. We source manual and electric stackers from verified sellers, check the mast, forks and battery, and deliver to your store.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get stackers sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying stackers in Bangladesh

A stacker is a pallet truck that lifts high enough to set a pallet on a rack or on another pallet, usually with an electric lift. The operator walks with it or, on some designs, rides on it. It is not a reach stacker, which handles shipping containers at ports and terminals. Stores, factories and wholesalers in Bangladesh use stackers to fill racks indoors.

Roptan works as your stacker supplier in Bangladesh. Tell us the load, the top beam, the floor and how many lifts a shift. We source from verified sellers, line up offers on one specification, have the truck checked before it ships and deliver it.

Kinds of stacker

Manual stackers

Pushed by hand, with a hand-pumped hydraulic lift. Choose it for light, occasional stacking where nobody wants to arrange charging.

Battery-lift stackers

Pushed by hand, with a battery-powered lift. Choose it when you stack often enough that pumping slows the work, but runs stay short.

Straddle stackers

The legs run either side of the pallet instead of beneath it. Choose it when the pallet base will not let legs pass under; give its outside width.

Self-propelled walk-behind stackers

Powered lift and powered travel, with the operator walking behind. Choose it for longer runs and more lifts per shift; it is built to the self-propelled truck standard.

Rider stackers

The operator stands on a platform or rides. Choose it for larger stores with longer runs; it is a self-propelled truck under ISO 3691-1, not a pedestrian truck.

How to specify a stacker

Load and load centre
The weight in kg with the pallet, and where its centre sits. Capacity falls as the centre moves out, so give the pallet length and any overhang.
Top beam
The highest beam the load must clear, plus doorway and ceiling heights. Stability drops as the load goes up, so read the capacity at that beam off the load chart, not the plate.
Forks and pallets
Fork length should cover at least two-thirds of the load. Give the pallet size and type, since fork spread and straddle legs must suit it.
Floor and route
The pedestrian standard assumes smooth, level, hard floors. Say if the route crosses broken concrete or a ramp; the standard excludes gradients and rough surfaces, so the seller must confirm suitability.
Heat, humidity and cold
The standard adds nothing for freezers, high heat or corrosive air. For a hot, humid, coastal or cold store, ask the seller for written suitability.
Charging place
Charging a lead-acid battery gives off hydrogen and oxygen, an explosive mix. Name a ventilated spot away from heat and sun, and who tops up with distilled water.
Walk or ride
Say whether staff will walk with the truck or ride it: a rider stacker is a self-propelled truck under ISO 3691-1, not a pedestrian truck under ISO 3691-5.

Standards and tests for stackers

ISO 3691-5
Safety of pedestrian-propelled trucks; its scope lists straddle stackers, pallet stackers and other pedestrian trucks up to 1,000 kg, with manual or battery lift. EN 16307-5:2023 adds European requirements.
ISO 3691-1
Covers self-propelled pallet-stacking and straddle trucks, rider stackers among them. A quote for a stacker with powered travel should name this part.
ISO 22915-4
The stability test for pallet stackers, double stackers and order-picking trucks with an operator position up to 1,200 mm. Ask for the maker's result.
IEC 60254-1 and IEC 62485-3
General requirements and tests for lead-acid traction batteries, and safety requirements for traction batteries. Ask which the quoted battery meets.

What moves the price of a stacker

  • Capacity: the rated load at your top beam, taken from the load chart.
  • Lift height: a taller mast to clear a higher beam.
  • Lift and travel: hand-pumped lift, battery lift, or powered travel as well.
  • Pedestrian or rider: a platform makes it a different class of truck.
  • Battery and charger: the type and ampere-hour size of the battery, and a charger sized to it.

Lead times and delivery

No published lead time or minimum order for stackers stood up to checking, so no figure appears here. Manual stackers are usually held in stock; a powered or rider stacker ordered from abroad waits on freight and clearance. A tall mast or a straddle frame for unusual pallets can add time. Roptan confirms the date and any minimum in the quote.

The seller delivers the stacker to your store anywhere in Bangladesh, charges the battery and lifts the nameplate load to full height before first use. Your operators are briefed on the controls and the load chart. With it come the VAT invoice (Mushak 6.3), the written warranty, the manual, the signed test sheet and, where the stacker was imported, its bill of entry.

What we check for this order

  • Mast and chainsNo broken welds, cracks or bent sections on the mast, and chain anchor pins neither worn, loose nor bent.
  • Forks and hosesForks straight and level with each other; hydraulic hoses secure, not crimped or worn, and no fluid leaks.
  • Battery and liftBattery held down with no exposed wires, and the lift moving smoothly through its full height.
  • Load test at handoverThe stacker lifts its nameplate load to full height before first use, with the result signed.

Questions buyers ask

What is the difference between a stacker and a reach stacker?

A stacker is a warehouse truck that lifts pallets onto racks. A reach stacker is a large vehicle that lifts shipping containers at ports and terminals. If a quote for warehouse work says reach stacker, ask the seller to confirm the machine before you compare offers.

Manual or electric stacker?

A manual stacker suits light loads and occasional lifts, with no charging to arrange. A battery lift saves pumping when you stack often, and powered travel suits longer runs. Once travel is powered, the stacker falls under ISO 3691-1, so ask the seller which standard it is built to.

What capacity do we need?

Start from the heaviest pallet with its goods, then find the load chart figure at your highest beam, not the plate maximum. Rated capacity shrinks as the load centre moves outward and as the load climbs. The pedestrian standard, ISO 3691-5, is written around trucks up to 1,000 kg with manual or battery lift; a stacker with powered travel falls under ISO 3691-1 whatever its capacity.

Can a stacker work on a ramp or in a yard?

Usually not. The pedestrian-truck standard is written for smooth, level, hard floors, and a raised load makes a stacker less stable. If the route crosses a yard, a ramp or broken concrete, tell us, so the seller can propose a truck that suits it.

How soon will I hear back about forklifts?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other forklift products

Each product type has its own page as it is published; until then its card opens the category form.

All forklifts