Buying reach trucks in Bangladesh
A reach truck is an electric rider truck for racked warehouses. Its forks, or its whole mast, move forward to place a pallet in the rack, then draw back so the truck can turn in a tight aisle. It usually lifts higher than a counterbalance forklift and is built for flat indoor floors. It is not a reach stacker, the container handler used at ports.
Roptan acts as your reach truck supplier in Bangladesh. Send the beam heights, pallet size, loads and aisle widths, or the racking drawing. We source from verified sellers, compare offers on capacity at your top beam, battery and service terms, check the truck and deliver it. The seller commissions it in your aisles.
How to specify a reach truck
- Aisle width
- Ask for the maker's right-angle stacking width with your pallet: the least space to turn and enter a pallet, before load length and clearance are added.
- Beam heights and capacity
- List every beam height. Capacity falls as the load rises and as its centre moves out, so the quote must show the load chart figure at the top beam.
- Floor
- State the slab's condition and get the maker's floor requirement. Where grinding is needed, one maker's narrow-aisle guide advises grinding the whole aisle width, since ground wheel tracks leave edges that unsettle the truck.
- Forks and pallets
- Forks at least two-thirds of the load length. Give the pallet size and type, and any pallets that differ from the rest.
- Charging bay
- Lead-acid batteries release explosive hydrogen and oxygen on charge. Plan a ventilated bay out of heat and sun, with an eyewash station and safety shower.
Standards and tests for reach trucks
- ISO 3691-1
- Safety requirements for self-propelled industrial trucks; the scope names reach trucks with retractable mast or retractable fork arm carriage. The European adoption is EN ISO 3691-1:2015 with Amendment 1 of 2020.
- ISO 3691-3
- Extra requirements for trucks with an elevating operator position or built to travel with the load raised above 1,200 mm. A reach truck normally travels with the load lowered, so ask the seller whether it applies.
- ISO 22915-3:2021
- The stability test for reach and straddle trucks. The 2014 edition was withdrawn in 2021, so a test report should cite the current text.
- EN 1175:2025
- Electrical and electronic safety requirements for industrial trucks, current since December 2025, when the 2020 edition was withdrawn. Ask which edition the truck follows.
Lead times and delivery
No source we opened gives a reach truck lead time or minimum we could rely on, so none is quoted here. A truck ordered from abroad waits on freight and customs clearance, and a tall mast, a lithium-ion pack or guidance equipment can add time, as can floor work needed before commissioning. Roptan confirms the date and any minimum in the quote.
The truck reaches your store anywhere in Bangladesh, and the seller commissions it in your aisles: battery charged, a rated load lifted to the top beam, and operators briefed on the reach controls and the load chart. Handover papers: the VAT invoice (Mushak 6.3), the written warranty, the manuals, the signed test sheet and, where the truck was imported, its bill of entry.
Questions buyers ask
Can a reach truck work outside or on a ramp?
Usually not. Reach trucks are electric and made for flat, even indoor floors, and a raised load reduces stability. For a yard, a loading ramp or broken concrete, look at a counterbalance forklift, and keep the reach truck inside the racked area.
How much aisle does a reach truck need?
It depends on the model, the pallet and the load, so we give no single figure. Get the maker's right-angle stacking width for your pallet, then usually add the load length and a clearance. Very narrow aisle racking is a separate class, usually run with rail-guided or wire-guided trucks.
What does our floor need?
A flat, level, sound slab that meets the maker's stated floor tolerance for the truck you buy. Guided very narrow aisle trucks usually face stricter floor limits, which tighten as lift height rises. Have the floor checked against the maker's figure before you order.
Moving mast or moving carriage: which should we choose?
Both reach into the rack; they differ in how. A moving mast runs the whole mast forward on tracks, while a moving carriage keeps the mast still and pushes the forks out. Use differs by region, so compare both on the seller's aisle width and load chart for your racking.
How soon will I hear back about forklifts?
Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.
Who do I deal with?
With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.