Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Lifts and elevators

Passenger lift supplier in Bangladesh

Looking for a passenger lift supplier in Bangladesh for flats, offices or a hotel? Send the floors, shaft size and expected traffic. We source traction, machine-room-less or hydraulic lifts from verified sellers, check the safety papers and arrange installation through the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get passenger lifts sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying passenger lifts in Bangladesh

A passenger lift carries people between floors in a car running on guide rails inside a shaft. Buyers in Bangladesh are developers, flat owners' associations, office landlords, hotels and schools. Most lifts sold here are imported, industry says, and no agency inspects a lift once it runs, so what you write into the order is your safeguard.

As your passenger lift supplier in Bangladesh, Roptan takes the drawings, floors and use by form or chat, sources offers from verified sellers and sets them side by side on load, speed, drive and maintenance. We check the safety papers and who built each part; the seller installs, tests and hands over.

Kinds of passenger lift

Geared traction lifts

The car hangs on steel ropes over a drive sheave, balanced by a counterweight, with a gearbox at the motor. Usually chosen for speeds up to about 3 m/s.

Gearless traction lifts

A low-speed, high-torque motor turns the sheave directly. Faster than geared machines, so they suit taller buildings and heavier traffic.

Machine-room-less lifts

A traction lift with most of the machine and controls in the shaft, so no roof room is built. Ask the cabinet's maximum ambient temperature: shafts run hot in summer.

Hydraulic passenger lifts

A piston pushes the car up. Usually for two to five floors and light traffic at up to about 1 m/s; usually cheaper to buy, but the pump uses more energy.

Lifts for existing buildings

For an older building that never had a lift and has little room for a shaft. EN 81-21 covers this case; ask whether the quote is built to it.

What a passenger lift supplier in Bangladesh needs from you

Car size and rated load
Rated load in kg and inside car size in mm. For new buildings EN 81-70 sets 1,100 by 1,400 mm at 630 kg as the smallest car for a wheelchair user.
Number of lifts and speed
Both follow from travel and peak traffic. ISO 8100-32 is the planning method; a consultant can check a proposal against it.
Stops and travel
Stops, floor heights and total travel in metres. Above 30 m of travel, compensation ropes or chains are usually added.
Machine and roping
Geared or gearless, and the roping ratio: 2:1 or 4:1 works like a reduction gear, slower but carrying more.
Power cuts and voltage
As one engineer describes the national building code, it likely requires a rescue device, a voltage regulator and standby power for at least one lift.
When the code needs a lift
As one engineer reads it, likely from six storeys or 20 m, with a fire lift above 15 m. Your consultant confirms what applies to your plan.

Standards and papers for a passenger lift

EN ISO 8100-1:2026
Safety rules for building and installing passenger and goods passenger lifts, valid from 15 October 2026. Older papers may cite the earlier EN 81 edition: ask which applies.
EN ISO 8100-2:2026
Design rules and tests for door locks, safety gear, overspeed governors and buffers. Ask for each part's type-examination certificate.
EN 81-70 and EN 81-28
Access for people with disabilities, and the remote alarm linking a trapped passenger to a rescue service.
EN 81-72 and EN 81-73
Firefighters lifts, and how any lift behaves in a fire. A fire lift is a separate duty: name it if your plan needs one.
BNBC 2020
Its lift rules draw largely on the EN 81 series. With no inspector, your consultant and the test record carry the check.

What moves the price of a passenger lift

  • Drive: a hydraulic lift usually costs less to buy than a traction lift but uses more energy.
  • Speed and travel: more travel means longer rails and ropes, and compensation ropes above 30 m.
  • Parts origin: an imported lift, a local assembly and a workshop-built car can look alike; ask for origin line by line.
  • Import duty: the importers' association says lifts lost capital machinery status in 2023, raising the duty.
  • Maintenance: comprehensive contracts with preventive work usually cost more than call-out cover.

Lead times and delivery

We found no reliable published lead time for passenger lifts in Bangladesh, so we give no figure. The clock usually starts when the layout drawing is approved; an imported lift then waits on shipping and customs, and an unfinished shaft delays installation. Roptan confirms dates, any minimum and payment terms in the quote.

The seller delivers the lift, installs it in the finished shaft and commissions it. Ask to witness the tests of safety gear, governor, door locks, alarm and rescue device, each on a signed record. At handover, collect the VAT invoice (Mushak 6.3), the commissioning record, type-examination certificates, wiring diagrams and the maintenance contract.

What we check for this order

  • Who built each partWe ask who made the machine, controller and doors, because some locally built lifts are sold under international names.
  • Type-test papersWe check the type-examination certificates for locks, safety gear, governor and buffers, and the edition each cites.
  • Offers on the same basisWe line up offers on load, car size, speed, drive and power-cut behaviour before you compare totals.
  • Maintenance in writingWe check whether reactive or comprehensive maintenance is priced, and get the call-out time for a trapped passenger in writing.

Questions buyers ask

Who inspects a passenger lift in Bangladesh?

No agency inspects lifts once they run. BSTI says lifts are outside its mandate, RAJUK and CDA check building plans, and the Bangladesh Building Regulatory Authority was not yet working in mid-2026. Type-test papers, the commissioning record and the maintenance contract are your checks.

Should we choose a hydraulic or a traction lift?

For two to five floors and light traffic, hydraulic usually works and costs less to buy, though it uses more energy. Above that, traction is usual, and a machine-room-less traction lift saves a roof room.

How big should the car be?

At least 1,100 by 1,400 mm at 630 kg in a new building. A 1,100 by 2,100 mm car at 1,000 kg also takes a stretcher, which the code, as one engineer describes it, likely requires above ten storeys or 32 m.

How long does a passenger lift last?

Usually about 30 to 40 years if the maker's service intervals are kept. Along the way a modernisation usually replaces the controller, drive, doors and fixtures, while rails and car frame stay. So price maintenance with the lift.

How soon will I hear back about lifts and elevators?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other lift products

Each product type has its own page as it is published; until then its card opens the category form.

All lifts and elevators