Buying lift modernisation in Bangladesh
Lift modernisation replaces the worn or outdated parts of a working lift while keeping its heavy structure. A typical job renews the controller, wiring, buttons, indicators, machine and door operators; car frames and rails are rarely changed. Owners in Bangladesh order it when parts get hard to find, breakdowns grow or the lift has no rescue device.
As your lift modernisation supplier in Bangladesh, Roptan takes the lift's age, drive, faults and floors by form or chat, and sources sellers who survey it and quote what is replaced and what stays. We set the scopes side by side, check who fits the new parts and see the test record at handover.
How to specify a lift modernisation
- Lift details
- Age, drive type, roping, load, stops and travel from the nameplate or old drawings, plus the faults you see most often.
- Survey first
- A condition survey that lists each part to replace, keep or check, and which old parts still have spares.
- Rails and structure
- Rails are often kept, so the survey checks they are straight, secured and rated for the new load. One engineer reads the code as requiring load and earthquake checks.
- Hydraulic lifts
- Have the cylinder, bulkhead and pipework inspected: older single-bulkhead cylinders could fail and leak oil into the ground.
- Power cuts
- Fix power-cut behaviour in the scope: a traction car stops and returns to a landing, a hydraulic car lowers to the bottom. The UPS or generator size follows.
Standards for upgrading an existing lift
- EN 81-80:2019
- Rules for improving the safety of existing passenger and goods passenger lifts. Use it as the survey checklist; the owner usually chooses which items to do.
- EN 81-82 and EN 81-83
- The 2025 editions on improving the accessibility and the vandal resistance of existing lifts. Name them if those are your aims.
- EN 81-21:2022
- New lifts in existing buildings. Ask about it when the old lift is not worth keeping and a new one must fit the building.
- EN ISO 8100-2:2026
- Design and tests of safety parts. New door locks, safety gear or governors should come with type-examination certificates.
Lead times and delivery
We found no reliable lead time for lift modernisation in Bangladesh, so we give no figure. The survey comes first; imported parts then wait on shipping and customs, and a wider scope keeps the lift out of service longer. Roptan confirms dates, the downtime, any minimum and payment terms in the quote.
The seller removes the old parts, fits the new ones and recommissions the lift. Ask to witness tests of the safety devices, door interlocks, brakes, ropes and earthing, each on a signed record. At handover you get the VAT invoice (Mushak 6.3), that record, new wiring diagrams, certificates for new safety parts and a maintenance contract with a defined first-year service.
Questions buyers ask
Is modernising cheaper than a new lift?
It depends on the scope, which moves the cost most: a controller-only job and a full upgrade of doors, car and ropes differ widely. Ask each seller for a line-by-line scope, and compare it with a new-lift quote for the same shaft before you decide.
When should an old lift be modernised?
When parts get hard to find, breakdowns grow, the ride worsens or the lift lacks safety items such as a rescue device. Lifts are usually built for about 30 to 40 years of service if maintained, so an older lift is often due a survey.
Who approves the finished work?
No authority orders a modernisation or signs it off in Bangladesh, since no agency inspects lifts in service. Your own consultant and the written test record are the check, so arrange both before the work starts.
Can a lift without a rescue device get one?
Ask the surveying seller. As one engineer describes the national building code, a rescue device that takes the car to the nearest floor in a power cut is likely required, and a lift missing one is a common reason to modernise. The survey says whether the old controller can take one.
How soon will I hear back about lifts and elevators?
Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.
Who do I deal with?
With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.