Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Lifts and elevators

Hospital bed lift supplier in Bangladesh

Need a hospital bed lift supplier in Bangladesh for a new wing or a clinic? Send your largest bed with its equipment, the floors and the traffic. We source stretcher and bed lifts from verified sellers, check the car against your beds and arrange installation through the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get hospital bed lifts sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying hospital bed lifts in Bangladesh

A hospital bed lift is a passenger lift with a deep car that takes a patient on a bed or stretcher, with attendants and equipment. Hospitals, clinics and diagnostic centres in Bangladesh buy them. As one engineer describes the national building code, a hospital of two or more storeys likely needs a lift that can carry a stretcher.

As your hospital bed lift supplier in Bangladesh, Roptan takes your bed models, floors and layout by form or chat, and sources offers from verified sellers on the same car size, doors, speed and emergency functions. We check the car against your beds and the safety papers; the seller installs and commissions it.

Kinds of hospital bed lift

Stretcher lifts

A car long enough for a standard stretcher. EN 81-70 describes its 1,100 by 2,100 mm car at 1,000 kg as allowing stretchers. Choose it for clinics without ward beds.

Ward bed lifts

A larger car for a ward bed with attendants. One trade guide puts these at roughly 1,600 to 2,000 kg, but sizes vary, so the car follows your beds.

Theatre and intensive care lifts

The largest car, for an intensive care, theatre or bariatric bed with equipment and staff, about 2,000 to 2,500 kg in the same guide. Choose it between theatres and intensive care.

Logistics lifts

Cars for trolleys, linen and waste, kept apart from the bed lifts. Name them in the enquiry if your plan has them.

What a hospital bed lift supplier in Bangladesh needs

Bed and car size
Your largest bed with its equipment, and how many attendants travel. EN 81-70 does not size bed cars; the seller confirms the car against your beds.
Door width
The clear opening your largest bed needs. EN 81-70 sets at least 900 mm on its smaller accessible cars; bed cars need wider doors.
Speed and levelling
One guide calls 1.0 to 1.6 m/s common for low and mid-rise hospitals. Ask for stopping accuracy of about 10 mm, so wheels cross the sill without a jolt.
Door timing
Adjustable door closing time for slow patients and bulky beds, and a hold button that keeps the doors open while a bed is loaded.
Emergency recall
A key switch that calls a car, parks it with doors open, then lets staff run it non-stop to their floor with a key in the car.
Power
As one engineer describes the code, at least one lift likely needs standby power. Ask whether a UPS keeps the lift running while the generator is tested.
Finishes
Stainless steel walls that are easy to disinfect, a welded PVC floor, flush lights and ventilation that renews the air.

Standards and papers for a hospital bed lift

EN ISO 8100-1:2026
Safety rules for passenger and goods passenger lifts, bed lifts among them, valid from 15 October 2026. Older papers may cite the earlier EN 81 edition.
EN ISO 8100-2:2026
Design and tests of door locks, safety gear, governors and buffers. Ask for each part's type-examination certificate.
EN 81-72 and EN 81-73
Firefighters lifts and lift behaviour in a fire. EN 81-72 adds firefighting requirements to an ordinary passenger lift, so a bed lift can be built as the fire lift; the layout drawing shows which car does which duty.
EN 81-28
The remote alarm, which connects a trapped passenger to a rescue service. Ask that it also reaches the hospital's own control room, not only the lift company.

What moves the price of a hospital bed lift

  • Car size and load: a bigger car weighs more, and the importers' association says customs assess imported lifts at a value per kilogram.
  • Speed: one guide puts hospital towers at 2.0 to 2.5 m/s, against 1.0 to 1.6 m/s in low and mid-rise buildings.
  • Emergency functions: recall service, a UPS and an alarm link to the control room each add equipment.
  • Hygiene finish: stainless walls, a welded PVC floor and air renewal cost more than a standard interior.
  • Maintenance: hospitals usually choose comprehensive contracts with preventive work, which cost more than call-out only.

Lead times and delivery

We found no reliable lead time for hospital bed lifts in Bangladesh, so we give no figure. Large or non-standard cars, emergency functions and the hygiene finish usually add time, as do shipping and clearance for an imported unit. Roptan confirms dates, any minimum and payment terms in the quote.

The seller delivers, installs and commissions the lift. Ask to witness a levelling test with a loaded bed trolley at every floor, and tests of door interlocks, light beams, overload protection and earthing, each recorded. At handover you get the VAT invoice (Mushak 6.3), the commissioning record, type-examination certificates, the recall key procedure and the maintenance contract.

What we check for this order

  • Car against your bedsWe check the car and door sizes against the beds, trolleys and equipment you listed, not a catalogue size.
  • Who built each partWe ask who made the machine, controller and doors, because some local builds are sold under international names.
  • Recall and powerWe check the quote includes recall service, the rescue device and how the lift runs on generator power.
  • Response time in writingWe get the response time to a trapped bed in writing, and whether the contract is comprehensive or call-out only.

Questions buyers ask

What size car does a hospital bed need?

It depends on your beds. Sources differ, so treat any table as a starting point: one trade guide puts ward and intensive care cars at roughly 1,400 to 1,800 mm wide and 2,400 to 2,700 mm deep. Measure your largest bed with its equipment and have the seller confirm the car.

Does a hospital need a bed lift by law?

As one engineer describes the national building code, hospitals of two or more storeys likely need a lift that can carry a stretcher. Your architect confirms the clause. No agency inspects lifts once installed, so the hospital's own checks matter.

Can the bed lift be our fire lift?

Yes, if it is built to EN 81-72, which adds firefighting and evacuation requirements to an ordinary passenger or goods passenger lift. Say so in the enquiry, since the shaft, doors and power supply change with that duty. The layout drawing must show which car does which duty.

What is emergency recall?

A medical emergency service. A key switch at a floor calls the fastest car regardless of direction or load; it parks with doors open and car buttons off, and staff take it non-stop to their floor with a key inside the car.

How soon will I hear back about lifts and elevators?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other lift products

Each product type has its own page as it is published; until then its card opens the category form.

All lifts and elevators