Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Weighing scales and weighbridges

Load cell and indicator supplier in Bangladesh

Send Roptan the capacity, cell type, output and cable length, or a photo of the cell you are replacing. As your load cell and indicator supplier in Bangladesh, we source from verified sellers, check the match and the papers, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get load cells and indicators sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying load cells and indicators in Bangladesh

A load cell turns force into an electrical signal, and the indicator powers it, reads that signal and shows the weight. Strain gauge cells are the most common industrial type. Scale assemblers, factories weighing tanks and hoppers, and plants repairing old scales in Bangladesh buy them as parts, usually to match what is already fitted.

A load cell and indicator supplier in Bangladesh must match parts that are specified separately: cell, junction box and indicator. Roptan sources from verified sellers, checks that capacity, output, class, sealing and cable suit what is already fitted or planned, and delivers. Calibration of the finished scale is arranged through the seller.

Kinds of load cell and indicator

Single-point and planar beam cells

Single-point cells carry small to medium platforms; planar beams suit low-profile, medical and retail scales. Choose them for counters and bench builds.

Bending and shear beam cells

Bending beams suit pallet, platform and small hopper scales; shear beams suit low-profile and process use, roughly 100 kg to 50 tonnes.

Compression and dual shear beam cells

Carry truck scales, weighbridges, large platforms, tanks and hoppers. Spoke-type cells cover roughly 1 to 500 tonnes. Choose these for heavy, fixed structures.

S-type cells and load pins

S-type cells take tension; load pins take static, dynamic or hoisting forces. Choose them for hanging loads and lifting gear.

Hydraulic cells

No electrical parts in the cell, so they suit hazardous areas and resist lightning transients, at a higher price.

Weighing indicators

Power the cells, read their millivolt signal and display weight. Choose by display, outputs, printer link and how it behaves through power cuts.

How to specify load cells and an indicator

Capacity and overload
Safe load limit is usually 150 percent of rated capacity, and rated capacity about two thirds of it, so a cell run near capacity has little margin for shock.
Output and excitation
State sensitivity in mV/V, typically 1 to 3, and excitation, typically 5 V or 12 V. The indicator must accept both.
Error figures
Compare hysteresis, non-linearity, combined error, repeatability and creep on the data sheets, not capacity alone.
Cable
Give the cable length and how lead-wire resistance is compensated. Keep millivolt cables screened from welding sets and motors.
Sealing
Under IEC 60529, IP67 survives immersion to 1 m for 30 minutes; IP68 survives continuous immersion as the maker states; IP69K takes hot, high-pressure spray.
Power
Outages of about five hours in an 11-hour working day were reported at Gopalganj BSCIC in August 2026. Plan backup power for the indicator.

Standards and calibration for load cells

OIML R 60
Sets load cell classes A, B, C and D by the number of load cell intervals. Class C usually runs from 500 to 10,000. Ask for the class in writing.
OIML R 60 and R 76 scope
R 60 stops at the cell's output and does not cover indicators or displays. The complete scale is judged under OIML R 76.
BSTI Force Measurement Laboratory
Part of the National Metrology Laboratory, it provides force calibration for items including load cells.
ISO/IEC 17025 calibration
The Bangladesh Accreditation Board is an ILAC MRA signatory for calibration since 29 June 2015, so its accredited labs' certificates are recognised across ILAC signatories.

What moves the price of load cells and indicators

  • Cell principle: hydraulic cells cost more than strain gauge cells of similar capacity.
  • Class: a cell built to a finer R 60 class usually costs more than a coarser one.
  • Sealing and material: IP68 or stainless steel cells cost more than cells for dry indoor use.
  • Indicator features: printers, data outputs and extra displays add to a basic indicator.
  • Number of cells: a weighbridge or tank needs several matched cells and a junction box.

Lead times and delivery

Common capacities held in Bangladesh move faster than special cells or indicators ordered abroad for your job. If the cells go into a trade scale, BSTI states targets of 3 to 7 working days for verification and 5 to 30 for calibration. Roptan confirms dates and any minimum in the quote.

We deliver the cells, junction box and indicator anywhere in Bangladesh, and can arrange fitting and calibration of the complete scale through the seller. You receive the data sheets, any class certificate offered, the warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Signal matchWe check the cell's mV/V and excitation against the indicator, so the indicator reads the cells correctly.
  • Class in writingWe ask for the R 60 class on the data sheet and keep it with the quote.
  • Sealing and glandsWe check the IP rating and sealed cable glands against your site's damp and wash-down.
  • Traceable calibrationWe ask how the finished scale will be calibrated: by BSTI's force laboratory or a BAB-accredited lab.

Questions buyers ask

Does a load cell need BSTI verification on its own?

BSTI verifies complete weighing instruments. Its gazetted schedule lists digital scales for model examination but does not list load cells or indicators as items on their own. If the cells go into a trade scale, ask BSTI whether the scale needs verifying again after the change.

Why does my scale drift after rain or a storm?

Moisture corrodes unprotected wires, and millivolt signals pick up electrical noise. Overload beyond the design limit does damage that cannot be recovered. Check the cable glands and junction box, fit surge protection, and test the zero with the deck empty.

What is the difference between OIML R 60 and R 76?

R 60 covers the load cell alone, up to its output. R 76 covers the complete non-automatic scale, including the cable, junction box and indicator errors. A cell with an R 60 class does not make the scale certified.

Which load cell suits a hazardous area?

Hydraulic cells have no electrical parts, which is why they suit hazardous areas. Electronic cells there need equipment certified for the zone, such as ATEX or IECEx. Tell us the area classification.

How soon will I hear back about weighing scales and weighbridges?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other weighing scale products

Each product type has its own page as it is published; until then its card opens the category form.

All weighing scales and weighbridges