Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Weighing scales and weighbridges

Crane scale supplier in Bangladesh

Send Roptan the heaviest lift, your hook or shackle and where the scale will work. As your crane scale supplier in Bangladesh, we source from verified sellers, check the rating, sealing and calibration papers, and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get crane scales sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying crane scales in Bangladesh

A crane scale measures the weight of a load hanging from a crane or hoist: the scale hangs from the hook and the load hangs from the scale. Steel and coil yards, scrap dealers, foundries, warehouses and workshops in Bangladesh use them to weigh coils, bales, castings and bags without setting the load down.

A crane scale supplier in Bangladesh sells a lifting accessory as well as an instrument, so the rating matters as much as the reading. Roptan sources from verified sellers, checks the working load limit, the shock margin, the sealing and the calibration route, and delivers. Calibration is arranged through the seller.

Kinds of crane scale

Hook crane scales

A digital scale with a hook or shackle at each end, hung between crane and load. Choose one for weighing many different loads in a yard or store.

S-type tension cell scales

Built around an S-type load cell, which takes tension loads, static or dynamic. Choose one for smaller loads hung in tension.

Load pins

A load cell in the form of a pin, rated for static, dynamic or hoisting forces. Choose one where weighing is built into the lifting gear rather than hung below the hook.

Mechanical hanging spring scales

Read correctly only while the load hangs still, and many carry a 'Not Legal for Trade' label abroad. Choose one only for rough checks.

How to specify a crane scale

Capacity and shock
Name the heaviest lift, then allow for shock: a sudden lift, hooking on or a dropped load can overload the cell. A safe load limit is usually 150 percent of rated capacity.
Working load limit
A crane scale hangs in the lifting chain, so treat it as lifting gear. Ask for its working load limit, the minimum breaking load divided by a safety factor, marked on the scale.
Reading class
Ask for the reading interval and the OIML R 76 class, so quotes compare like for like.
Heat
Load cell error limits under R 60 are usually stated for minus 10 to plus 40 degrees Celsius, and summer highs typically reach 38 to 41. Near a furnace or in direct sun, ask for the stated operating range.
Water and dust
For outdoor yards in the June to September monsoon, ask for IP65, dust-tight against water jets, or IP67, which survives brief immersion.
Steady reading
Lifting, lowering or swinging changes the reading. Ask how the display holds a stable weight once the load hangs still.

Standards, practice and papers for crane scales

Standards of Weights and Measures Act 2018
Covers weighing used in trade. BSTI's capacity bands from above 250 kg to 50 tonnes cover crane scales, but its pages do not say whether a hanging scale is verified like a floor scale. Ask before you sell by its reading.
UK LOLER practice
In the UK, lifting accessories are thoroughly examined every 6 months by a competent person, before first use, and marked with their safe working load. This is UK law, not Bangladeshi, but a useful benchmark for your own checks.
BSTI force calibration
BSTI's Force Measurement Laboratory, part of the National Metrology Laboratory, provides force calibration for items including load cells.
ISO/IEC 17025 calibration
A certificate from a lab accredited by the Bangladesh Accreditation Board is recognised across ILAC signatories for calibration since 29 June 2015.

What moves the price of a crane scale

  • Capacity: a higher rated capacity needs a larger cell, body, hook and shackle.
  • Load cell type: load pins and cells rated for dynamic hoisting forces usually cost more.
  • Protection: IP67 sealing and a wider stated temperature range add to the price.
  • Display and outputs: a large display, a remote readout or a data link add cost.
  • Calibration papers: a certificate from an accredited lab or BSTI belongs in the quote.

Lead times and delivery

Time depends on whether the scale is held in Bangladesh or imported for your order, and then on port time: average import container dwell at Chattogram was 8.3 days in 2024 on World Bank figures, and customs officials put it above 11 days in 2025. BSTI states a target of 5 to 30 working days for calibration. Roptan confirms dates and minimums in the quote.

We deliver to your yard or workshop anywhere in Bangladesh. The seller checks the scale with test weights at the place of use, since gravity varies by over 0.5 percent across the earth. You receive the calibration certificate, the rated capacity and working load limit in writing, the warranty and a VAT invoice (Mushak 6.3).

What we check for this order

  • Rating against your heaviest liftWe compare rated capacity with your heaviest lift and how it is picked up, so shock stays inside the cell's limit.
  • Working load limit markedWe check the working load limit is marked on the scale and stated in the papers, as lifting gear should be.
  • Sealing and heat rangeWe check the IP rating and operating temperature range in writing against your yard, furnace or monsoon conditions.
  • Traceable calibrationWe ask for a calibration certificate traceable to BSTI's National Metrology Laboratory or a BAB-accredited lab.

Questions buyers ask

How much bigger than my heaviest lift should the scale be?

Allow a margin for shock. A load cell's safe load limit is usually 150 percent of rated capacity, and strain beyond its design limit cannot be recovered. A jerked lift or a dropped load can pass rated capacity, so tell the seller how loads are picked up as well as how heavy they are.

Why does the reading jump while the load moves?

A hanging scale reads correctly only when the load is not accelerating. Lifting, lowering or swinging adds or removes force, so the display moves. Let the load hang still before you read or record the weight.

Do crane scales need regular examination?

We have not found a Bangladeshi rule setting examination intervals for crane scales. In the UK, lifting accessories are thoroughly examined every 6 months. Ask the seller what it recommends, and keep a record of each check.

Can I sell goods by the weight a crane scale shows?

Ask first. Trade weighing falls under the Standards of Weights and Measures Act 2018, but BSTI's pages do not say whether a hanging scale is verified like a floor scale. Ask BSTI or the seller before you buy or sell by its reading.

How soon will I hear back about weighing scales and weighbridges?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other weighing scale products

Each product type has its own page as it is published; until then its card opens the category form.

All weighing scales and weighbridges