Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Packaging machines

Shrink wrapper supplier in Bangladesh

Find a shrink wrapper supplier in Bangladesh through Roptan. Tell us the product, the finished pack and the film. We source L-sealers, sleeve wrappers and tunnels from verified sellers, have them proven with your film and deliver, with commissioning by the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get shrink wrappers sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying shrink wrappers in Bangladesh

A shrink wrapper wraps a product or a group of products in plastic film, and a heat tunnel shrinks the film tight. In Bangladesh it is used by drink and water bottlers for multipacks, and by food, soap and cosmetics brands for retail overwraps. A tight bundle can replace a corrugated carton.

A shrink wrapper supplier in Bangladesh has to match the sealer, the tunnel and the film to the finished pack you want, retail or transport. Roptan sources the machine from a verified seller, sets the trial with your film and products, checks the supply needed, the papers and warranty, and arranges commissioning through the seller.

Kinds of shrink wrapper

Manual L-sealers

The operator places the product in centre-folded film and pulls the L-shaped bar down to seal two sides. Choose one for low volumes and mixed product sizes.

Automatic L-sealers

A conveyor feeds the product and the bar lowers by itself, with a hot wire or hot knife head. Choose one for steady retail overwrap at higher output.

Sleeve wrappers and bundlers

A group of bottles or a tray is wrapped in a sleeve of polyethylene film sealed with a hot knife, leaving open bulls-eye ends. Choose one for multipacks without a carton.

Combined sealer and tunnel

An L-sealer and a tunnel on one frame. Choose one for a small workshop with low volume and little floor space; separate units usually suit higher output.

Shrink tunnels

Heated by electric elements, infrared, steam or gas, usually with forced hot air, on rollers or a mesh belt, some with a cooling zone. Size it to the largest pack.

How to specify a shrink wrapper

Finished pack
Send photos of the pack you want and say whether it is a retail overwrap or a transport bundle. The same product may need different machines for each.
Product and bundle
Give product size and weight, the bundle pattern and items per bundle, and output as finished packs a minute. The seal bar must be wide enough for the largest bundle.
Film
Name the type, thickness and roll form: centre-folded, flat or pre-made bags. Polyolefin, polyethylene and PVC films are not interchangeable, and some shrink one way, some both.
Film properties
Ask the film supplier for onset temperature, free shrink, shrink force and the shrink temperature range, and prove tunnel settings with that film, not a generic one.
Heat-sensitive products
For products that soften or deform in heat, have the tunnel temperature and exposure time checked on the product itself.
Conveyor and supply
Rollers suit most films; a mesh belt carries small or unstable packs. The tunnel is an electric heater, so check phase, 50 Hz supply and whether the panel or generator can carry it.

Standards, film tests and paperwork

EN 415-5
Safety of wrapping machines, including the shrink tunnel connected to them, in its 2006+A1:2009 edition. Ask for it on L-sealers and overwrappers.
EN 415-7
Group and secondary packaging machines with their collating systems, 2006+A1:2008 edition, with a revision in draft. Ask whether a bundler or sleeve wrapper is declared to it.
ASTM D2732 and D2838
Film tests: D2732 measures free shrinkage when heated, D2838 shrink tension. Ask the film supplier for results on the film you will run.
CE declaration
Usually cites Directive 2006/42/EC, which Regulation (EU) 2023/1230 replaces from 14 January 2027. Ask about guarding at hot seal bars and the tunnel inlet.

What moves the price of a shrink wrapper

  • Automation: manual, semi-automatic or automatic sealer, and any product grouping device.
  • Seal bar width: wider bars for larger packs and bundles cost more.
  • Tunnel: length, heating zones, conveyor type and a cooling zone.
  • Seal head: hot knife or hot wire, and the heating elements that wear.
  • Film: type and thickness set running cost on every pack.

Lead times and delivery

Time depends on the machine. A manual L-sealer or a small combined unit that a seller already holds in Bangladesh usually arrives soonest. An automatic bundler with grouping for your bottles takes longer: build, a trial with your film, freight and clearance. Roptan confirms dates and any minimum order in the quote.

The seller delivers to your plant, sets the sealer and tunnel in line, connects the supply and runs the trial with your film and products. Have enough production film and product ready. You receive the VAT invoice (Mushak 6.3), the tunnel and sealer settings that passed, the trial record, the spares list and the warranty in writing.

What we check for this order

  • Trial with your filmPacks wrapped with the film you will buy, at target output, not with the seller's own film.
  • Finish of the packAn even, tight shrink without loose corners or splits, and a bundle that holds when lifted and handled.
  • Supply capacityThe tunnel's power draw checked against your panel and generator before the machine is shipped.
  • Wear parts and warrantyWhich heating elements and belts are excluded as wear parts, and which spares are held in Bangladesh.

Questions buyers ask

Polyolefin or polyethylene film?

Polyolefin is a widely used shrink film; it is clear and seals well on irregular items, so it usually goes on retail packs. Polyethylene is used for heavy bundles such as bottle multipacks, but it shrinks less and is less clear. Confirm thickness and conditions with your film supplier.

Can shrink bundles replace cartons for bottled water?

Often, for multipacks: a sleeve wrapper with a bundling tunnel holds a group of bottles in thick polyethylene film, with or without a tray. Test the bundle through your own handling and transport before you drop cartons, and check what your buyers accept.

Why does my shrink wrap wrinkle?

Usually the film, tunnel heat, airflow and conveyor speed do not match. Even airflow and controlled temperature help an even shrink, but the settings must be found with the film you actually use, so ask the seller to set the tunnel on your film and record what works.

Can my generator run a shrink tunnel?

Check before you buy. The tunnel is an electric heater, so it can be a large load. Ask the seller for the rated power and supply, and have your electrician compare it with your panel and generator capacity.

How soon will I hear back about packaging machines?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other packaging machine products

Each product type has its own page as it is published; until then its card opens the category form.

All packaging machines