Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Machinery and handling · Agricultural and garden machinery

Reaper and combine harvester supplier in Bangladesh

Tell Roptan your fields, your crop and your harvest dates. As your reaper and combine harvester supplier in Bangladesh, we source from verified sellers, check the machine and its papers, and have it delivered before the season.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get reapers and combine harvesters sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying reapers and combine harvesters in Bangladesh

A reaper cuts the standing crop and lays it in a row for collection; a combine harvester cuts, threshes and cleans the grain in one pass. About a fifth of crops in Bangladesh were harvested by these machines at last report. Buyers are usually service providers who harvest other farmers' paddy for a fee, many of them in haor and coastal areas.

A combine earns in a short window: owners surveyed worked an average of 58 days a year, mostly in boro. A reaper and combine harvester supplier in Bangladesh must deliver, train and service inside that window. Roptan sources from verified sellers, checks model, origin and a field run, and gets parts and warranty terms written down.

Kinds of reaper and combine harvester

Walking reaper

A cutter bar, usually driven by a two-wheel tractor, that cuts the crop and lays it in a row. Choose it where labour for cutting is short but threshing is done separately.

Full-feed combine

Takes the whole plant into the threshing unit. Faster on large, even fields, but needs more power and fuel and leaves chopped straw. In a 2024/25 survey these averaged 88 hp.

Head-feed combine

Feeds only the grain-bearing head and leaves straw standing for fodder. Lighter, usually on tracks, and suited to small, scattered or waterlogged fields. Surveyed machines averaged 66 hp.

Mini combine

A small whole-feed machine for compact plots. In one Bangladesh field assessment of a 1.5 m cutting-width model, the research body advised plots larger than 1,500 square metres.

How to specify a harvester

Plot size and distances
The average farm here is about half a hectare, so a machine serves many small plots. State plot sizes and how far it travels between fields.
Feed type and straw
Say whether you want the straw. Rice straw is valued as cattle feed, which is why some buyers choose head-feed over full-feed.
Undercarriage and ground
Wet haor land calls for crawler tracks and low ground pressure. Head-feed machines usually cause less soil compaction in waterlogged fields.
Field efficiency
In one field trial only 58 percent of machine time was harvesting; turning took 23 percent. Ask how the model handles small, irregular plots, not just its rated speed.
Country of manufacture
Most harvesters here are imported, mainly from China, and one maker's models can be built in Japan, Thailand or China. Ask for the factory country on the quote.
Season and handover date
Give the date your harvest starts. Delivery, operator training and the first check must be finished before then.

Standards and papers for harvesters

ISO 4254-7:2017
Agricultural machinery: Safety, Part 7, for combine and other harvesters, used with ISO 4254-1:2013 on general requirements. Ask whether the machine was built to it.
ANTAM test codes
Regional test codes for combine harvesters and other farm machines. Bangladesh has no mandatory harvester test, so a report under such a code is a voluntary extra worth asking for.
CE marking and EU rules
Directive 2006/42/EC is replaced by Regulation (EU) 2023/1230 in January 2027. If a seller cites CE, ask which act and which standards apply.

What moves the price of a harvester

  • Kind: a walking reaper, a mini combine and a full-size combine sit in very different bands.
  • Engine power and size: full-feed machines usually need more power than head-feed ones.
  • Undercarriage: crawler tracks for wet land against wheels for firm ground.
  • Country of manufacture, which also shapes the cost and supply of spare parts.
  • After-sales terms: operator training, a parts kit and season service visits, included or extra.

Lead times and delivery

Combines are usually imported to order, so time runs from the factory's ready date through sea transit and clearance at Chattogram, where recent estimates put container dwell alone at about 8 to 11 days, then assembly and commissioning. A machine that misses boro waits most of a year for work, so order well ahead. Roptan confirms the dates and any minimum in the quote.

We deliver to your district, including haor and coastal areas. The seller assembles the machine, runs it in a field with your operator, explains daily checks, belts and cleaning, and sets the first service date. You receive the operator manual, in Bangla where available, the warranty in your name, the parts list and a VAT invoice (Mushak 6.3).

What we check for this order

  • Model and factory countryWe check the model, engine and country of manufacture on the machine against the quote and the import papers.
  • Loss in a field runWe ask the seller to show grain loss in a demonstration and say which losses were measured: shatter, cutter bar, cylinder or separating.
  • Parts and mechanicsWe ask where parts are stocked, how much, and where the nearest trained mechanic is, since missing parts are the most reported cause of downtime.
  • Warranty and trainingWe get the warranty, operator training and a Bangla manual written into the quote before you pay.

Questions buyers ask

Full-feed or head-feed?

Full-feed if your fields are large and even and you do not need the straw: it is faster. Head-feed if plots are small, scattered or waterlogged, or the straw goes to cattle. In a 2024/25 survey of 400 combine owners, about seven in ten machines were full-feed.

Should I buy a reaper or a combine?

A reaper only cuts; you still need threshing and carrying. A combine does it all in one pass but costs more and needs room to turn. If you serve many small farms with a thresher already in hand, a reaper may be enough. Tell us your plots and we ask sellers for both.

What stops a combine in the season?

Mostly parts. In the same survey 97 percent of owners had downtime, averaging 12 days a year; nearly 40 percent named missing spare parts as the main cause, ahead of a lack of skilled mechanics and the weather. Ask where parts are held before you buy.

How do I judge grain loss?

Ask for loss measured in four parts: shatter, cutter bar, cylinder and separating. In one Bangladesh field trial total mechanical loss stayed under 1 percent in both boro and aman. A demonstration on your own field shows more than a brochure figure.

Is a harvester BSTI certified?

No mandatory scheme existed for harvesters at last report, so treat such a claim with care. Ask instead for any test report under the regional ANTAM codes and whether the machine was built to ISO 4254-7.

How soon will I hear back about agricultural and garden machinery?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the model or specification, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other agricultural machinery products

Each product type has its own page as it is published; until then its card opens the category form.

All agricultural and garden machinery