Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Packaging and printing · Die cutting

Die cutting service supplier in Bangladesh

Need a die cutting service supplier in Bangladesh for your printed sheets or label rolls? Send the material, the die or dieline and the operations. We book a verified seller, check the first cut against your print and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get die cutting services sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying die cutting services in Bangladesh

A die cutting service cuts, creases, perforates or kiss cuts your material on the seller's press, with your die or one made for the job. The process shears paper, board, foil, foam, rubber and adhesive tape, and makes labels, gaskets and boxes. Printers, label converters and garment accessory makers use it for overflow, short runs and work their own press cannot take.

A die cutting service supplier in Bangladesh is judged on register, clean stripping and honest counts. Tell Roptan the material, quantity and operations. We book a verified seller, have the first sheets checked against your print, confirm the waste allowance and counts in the quote and deliver the blanks to you.

Kinds of die cutting service

Flatbed die cutting

Sheet-fed cutting with a steel rule die. The tool costs less, so it suits smaller runs and printed folding cartons; the sheet is set against stops or a locating nest.

Rotary die cutting

A cylindrical die turns against an anvil, often in line with printing. It runs faster and suits long runs of labels, flexible packaging and folding cartons from a web.

Kiss cutting

Cuts only the top layer and leaves the backing whole. It is the service for self-adhesive labels and stickers, which then peel from the liner.

Inline finishing

On rotary lines the cut can come with perforating, creasing, slitting, laminating and waste stripping in one pass. Check which steps the quote covers.

Cutting plotter work

A knife follows a digital path, with no die at all, so it is usually the route for samples and very short runs, not for long runs.

What to send a die cutting service supplier in Bangladesh

Material
Name it exactly: paperboard, corrugated, foil, foam, rubber or a label laminate. The material decides the tool and the press.
Thickness
Board thickness in mm and a sheet of the real board. GSM does not give the thickness, and the crease channel is sized to it.
Sheet size
Large sheets and thick board need a larger press: small die cutting presses usually give about 20 tons, larger ones over 150.
Register
The print sheet with its registration marks. On rotary lines gears keep the die in step with the print, and some presses add eye registration.
Print finish
Folding carton board is usually printed and laminated before cutting, so say whether sheets arrive varnished or laminated.
Operations
Which of cut, crease, perforate and kiss cut the job needs, and whether it runs in line with printing.
Die and quantity
Say whether you send your own die or need one made, the blanks per sheet and the total quantity, so make-ready is priced against the run.
Storage
Board that is too dry tends to crack at creases; damp board loses strength. In the monsoon, ask where sheets wait before cutting.

Tests and standards for die cut work

FINAT FTM 23
The die strike test for paper and filmic label stock, in the label trade's handbook. It sets no pass limit, so agree acceptance values in the order.
ISO 187:2022
The standard atmosphere for conditioning paper and board before testing, commonly 23 °C and 50% relative humidity.
ISO 536:2019
Grammage of paper and board. Use it to show the board delivered for cutting matches the board quoted.

What moves the price of a die cutting service

  • Tooling: a steel rule die costs less than a rotary die, whose extra cost is absorbed only on larger or repeat runs.
  • Press speed: flatbed presses run slower than rotary, so long flatbed jobs take more press time.
  • Steps in one pass: inline perforating, slitting or stripping avoid a second pass or a second seller.
  • Waste: well-kept tooling cuts cleanly and strips without stoppages, so the seller can quote a tighter waste allowance.

Lead times and delivery

No typical turnaround figure for die cutting job work could be confirmed, so Roptan gives none here. Time usually grows when a new die has to be made, the press that suits your sheet size is booked, or the first cut needs adjusting. On rotary lines a flexible die changes over in minutes, which helps short jobs. Roptan confirms dates and any minimum in the quote.

Cut blanks come back flat: folding cartons go to your packing line flat for its own machines to fold, and corrugated boxes come knocked down. Roptan delivers inside Bangladesh with counts per bundle or pallet as agreed, wrapped against monsoon damp, with the VAT invoice (Mushak 6.3) and a delivery challan.

What we check for this order

  • Die matched to the boardWe check the die and crease channel suit a sheet of your real board before the run.
  • First sheets in registerWe check the first cut sheets line up with the print before the seller runs the rest.
  • Cut depth and strippingFor labels we check the liner is intact and the waste matrix strips cleanly; for boards, that blanks separate cleanly.
  • Counts and waste in the quoteWe check the quote states every operation, the waste allowance and the count per bundle.

Questions buyers ask

Flatbed or rotary: which suits my job?

Flatbed for sheets, shorter runs and printed folding cartons, because the die costs less. Rotary for webs and long runs, often in line with printing, because it runs faster. The quantity and whether your material comes on sheets or rolls usually decide it.

What is kiss cutting?

Cutting through the top layer of a laminate while leaving the backing whole. Self-adhesive labels are made this way: the face and adhesive are cut, the liner stays intact, and the labels peel off the roll or sheet.

Can you cut a few samples without making a die?

Often, yes. A cutting plotter drives a knife along a digital path and needs no tool, so it suits samples and very short runs. It is not a substitute for a die on a long run.

Is there a standard for die cut quality?

No standard covers a die cutting service as such. For label stock the trade handbook has a die strike test, but it sets no limit, so the acceptance values go into your order and are checked on the first sheets.

How soon will I hear back about die cutting?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the quantity, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other die cutting products

Each product type has its own page as it is published; until then its card opens the category form.

All die cutting