Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Packaging and printing · Die cutting

Carton die supplier in Bangladesh

Roptan is a carton die supplier in Bangladesh for flatbed steel rule dies that cut, crease and perforate in one stroke. Send the dieline, a sheet of your board and the press details: we source the die, check a proof cut and deliver.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get carton dies sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying carton dies in Bangladesh

A carton die is the tool that turns a flat printed sheet into a carton blank. Strips of hardened steel rule sit in slots cut into a plywood dieboard, and rubber ejectors push the board free after each stroke. Converters and printers order one for every new box design, much of it for garment exporters: the packaging makers' association BPAMEA calls its sector the backward linkage industry of the garment trade.

A carton die supplier in Bangladesh has to build for your press and your board, and a die that misses either wastes sheets. Tell Roptan the dieline, board and machine. We source the die from a verified maker, have it tried on your own sheets, check the proof cut and deliver it. You deal with Roptan only.

Kinds of carton die

Cut and crease dies for paperboard

Cutting and creasing rule share one dieboard, so each stroke cuts the blank and scores its folds. Choose it for printed folding cartons.

Flatbed dies for corrugated board

For trays, inserts and boxes with handles, windows or locking tabs, which a slotter cannot make. Choose it for short and medium runs.

Dies with perforating rule

Adds tear strips and easy-open lines. The rule is sold by teeth per inch, from coarse to fine micro-perforation, so each pitch is a different rule.

Side bevel and flush bevel rule

The ground edge trades cut quality against life. Side bevel is usually described as cutting and lasting well; flush bevel cuts very cleanly but wears sooner.

Dies on metal bases

Most dies sit on high-density plywood, slotted by bandsaw or laser. Some special dies need an aluminium or steel base; the maker says when.

How to brief a carton die supplier in Bangladesh

Dieline and box style
A dieline drawing or a sample carton. For corrugated boxes, add the FEFCO style code where one fits.
Board caliper
Thickness in mm, measured on your real board, plus GSM. GSM does not give the thickness, and the crease channel is sized to it.
Flute direction
Mark whether each crease runs along or across the flutes: corrugated board folds and resists crushing differently each way.
Press and chase
The machine and chase size. The die is fixed to the top platen, and smaller presses usually give about 20 tons, larger ones over 150.
Rule height
Rule comes in several heights: a supplier describes 0.937 inch (about 23.8 mm) as usual for box work and 0.918 inch (about 23.3 mm) as type high for platen presses. Name your press.
Perforations and ups
Each perforation line with its pitch in teeth per inch, the blanks per sheet, and registration by stops or a locating nest.
Board condition
Board tends to crack at creases when too dry and loses strength when damp. For monsoon runs, proof on board stored as yours is.

Board tests and papers for a carton die

ISO 534:2011
Thickness, density and specific volume of paper and board. Ask for a paperboard sample's caliper by this method. Its scope excludes corrugated board, so state that thickness in mm plainly.
ISO 536:2019
Grammage of paper and board. With the caliper, it lets a later board lot be compared with the one the die was built for.
ISO 187:2022
Standard atmosphere for conditioning and testing, commonly 23 °C and 50% relative humidity. Humid, unconditioned board reads lower.
FEFCO style code
The internationally applied code for corrugated packaging design; its 12th edition adds more than a hundred designs, e-commerce styles among them.

What moves the price of a carton die

  • Die family: flatbed steel rule tooling costs less to make than rotary tooling, which pays back only on long or repeat runs.
  • Run length: on long or repeat runs the cost shifts towards better rule and a laser-cut base.
  • Rule edge: flush bevel wears sooner than side bevel, so the edge changes how long the die lasts.
  • Perforation: each perforating line, and each change of pitch, adds rule and setting work.
  • Base: an aluminium or steel base is a different build from plywood and is quoted on its own terms.

Lead times and delivery

No single making time holds for every carton die, so Roptan gives no figure here. It usually grows when the dieline is still changing, a metal base or special rule is needed, no sheet of real board has arrived, or the first proof cut needs corrections. Roptan confirms the date, and any minimum, in the quote.

Roptan delivers the die flat to your plant anywhere in Bangladesh, with the proof cut made on your board. Papers: the VAT invoice (Mushak 6.3), delivery challan, approved dieline reference and the board readings the die was built to. If the seller stores the die for repeats, that is put in writing.

What we check for this order

  • Board measured firstWe check the die is built to a caliper and GSM read on your real board.
  • Proof cut on your sheetsWe check creases fold without cracking, cuts are clean and the ejection rubber pushes the board free.
  • Fit to the pressWe check rule height, die size and registration method against the press and chase you named.
  • Ownership in writingWe check the quote says who owns, stores and repairs the die, so repeat orders do not stall.

Questions buyers ask

Why does the die maker want a sheet of board, not just the GSM?

Because the crease channel is sized to thickness, and GSM does not give it. Two boards of one GSM can differ in caliper and in how they fold, so the maker measures a real sheet and runs the proof cut on it.

Can one die cut, crease and perforate in a single stroke?

Yes. A carton die normally carries cutting, creasing and perforating rule together, so each stroke gives a finished blank. Mark each perforation line and its pitch: a tear strip and an easy-open line use different rule.

When is a rotary die worth it instead of a flatbed one?

When the run is long or repeats often. Rotary tooling costs more up front but runs faster, so the extra cost is recovered over volume. For new designs and short runs, a flatbed steel rule die is usually the sensible start.

Why does crease direction matter on corrugated board?

The board is not the same both ways: edge crush, stiffness and surface change with the flute. A crease across the flutes folds differently from one along them, so show the flute direction on the dieline.

How soon will I hear back about die cutting?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the quantity, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other die cutting products

Each product type has its own page as it is published; until then its card opens the category form.

All die cutting