Buying A4 copy paper in Bangladesh
A4 copy paper is cut-size paper of 210 × 297 mm, the ISO 216 size found in offices around the world. It belongs to the fine-paper class made for copiers and laser printers, judged on how it runs: it should feed smoothly, stay flat and hold no dust. Office reams usually come in 70, 75 or 80 GSM.
Faults in copy paper rarely show on the wrapper: a ream short of its GSM, sheets cut off size, paper that curls in the tray. A good A4 copy paper supplier in Bangladesh catches them first, so Roptan writes the grade into the quote, checks a sample from the actual lot and then delivers.
How to brief an A4 copy paper supplier in Bangladesh
- Grammage
- 70, 75 or 80 GSM with the tolerance you accept, measured to ISO 536 for each lot, not a nominal figure on the ream.
- Size and trim
- 210 × 297 mm. The ISO 216 tolerance on sides of this length is usually given as plus or minus 2 mm.
- Grain direction
- Long grain, parallel to the 297 mm side, with the machine direction marked on the ream wrap or carton label.
- Brightness and opacity
- Measured values, not a shade name. Copy papers usually fall between about 80 and 96 percent ISO brightness.
- Thickness
- Caliper as well as GSM: papers of equal GSM can differ in thickness, which changes stiffness and feed.
- Fibre and packing
- Virgin or deinked pulp, FSC if required, and moisture-resistant ream wraps, since damp sheets curl and cockle.
Tests and papers for A4 copy paper
- ISO 216
- Sets the A series, so an A3 sheet folded in half gives A4. It also covers how machine direction is shown on the pack.
- ISO 536 and ISO 187
- Grammage, tested on paper conditioned in the ISO 187 standard atmosphere, not paper taken straight off a damp truck.
- ISO 2470-1 and ISO 2471
- ISO brightness and opacity. With both figures on the certificate, two offers can be set side by side.
- ISO 534
- Thickness, density and specific volume: why two reams of the same GSM feel and feed differently.
Lead times and delivery
Roptan gives no standard lead time for A4 copy paper, because it depends on the order. Reams a seller already holds can move quickly; a GSM, brightness or fibre route the mill must make takes longer; imported reams wait on the letter of credit and the voyage. Roptan confirms the delivery date and any minimum quantity in the quote.
Roptan delivers to your office, store or branches inside Bangladesh, in cartons with the ream wraps intact, and a large order can be split into monthly call-offs agreed in the quote. Each delivery comes with a delivery challan, a VAT invoice (Mushak 6.3) and the mill certificate for the lot.
Buying A4 copy paper for export
Export Promotion Bureau data carry uncoated writing and printing paper in rolls or sheets under HS 4802, the line A4 copy paper falls under; the figure covers the whole line, not A4 alone. For export buyers, Roptan sources from sellers holding an Export Registration Certificate, checks the lot before loading and quotes FOB Chattogram.
Questions buyers ask
Should A4 copy paper be long grain?
Yes, as a rule. Paper should go into a copier grain edge first, with the axis of the rollers along the grain, and an A4 sheet written as 210 × 297 is long grain, parallel to the 297 mm side. Ask for long grain in the order and for the machine direction on the label.
Why did my sample weigh more than its GSM suggests?
Usually moisture. Paper takes up water from humid air, so sheets weighed straight off a truck can read heavy and hide a low GSM. For a fair check, let the sheets condition indoors first, then weigh a counted stack against about 5 g a sheet at 80 GSM.
What is the difference between virgin and recycled copy paper?
The fibre: 90 to 100 percent virgin chemical pulp, or 100 percent deinked pulp, both typically with 10 to 15 percent filler. Judge either by the same test: it should run smoothly, stay flat and leave no dust in the machine.
Can you supply A3 with the A4?
Yes. A3 is the next size up in the ISO 216 A series. Tell us the GSM and quantity for each size; we source both, check each on arrival against its own dimensions and weight, and deliver them together.
How soon will I hear back about paper?
Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the quantity, where it is needed and by when.
Who do I deal with?
With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.