Managed sourcing from Bangladesh, for export and for buyers at home
Get it sourced

Power and energy · Solar street lights

All in one street light supplier in Bangladesh

Use Roptan as your all in one street light supplier in Bangladesh: send the site, the road width and the hours you need lit, and we source sealed heads from verified sellers, check a sample and deliver, installed by the seller.

  • Verified sellers
  • Checked before it ships
  • Delivered by Roptan

Get all in one street lights sourced

Prefer to deal with suppliers yourself? Post it on the requirement board

Buying all in one street lights in Bangladesh

An all in one street light puts the panel, battery, charge controller and LED in one head on a pole, with no cable to lay and no battery box. Factories, campuses, estates and city corporations buy them for lanes and internal roads; Dhaka North City Corporation switched on 450 solar LED street lights in Bhashantek in April 2026.

Nothing in the head can be moved after fitting, so the choice is made on paper: the panel to battery to LED ratio, the heat the battery can take and a shade-free pole. As your all in one street light supplier in Bangladesh, Roptan sources from verified sellers, checks a sample and delivers.

Kinds of all in one street light

Dusk to dawn heads

The controller reads the panel voltage, switches on at dusk and off at dawn, and holds one output all night. Choose it where a road must stay at one level.

Dimming profile heads

Output drops through the quiet hours, so the battery carries the night on less stored energy. Choose it for estate roads and campuses that empty after midnight.

Motion sensing heads

A passive infrared sensor brings the light to full output the moment someone approaches, as LEDs need no warm-up. Reach is typically about 10 m, so it suits a narrow lane.

Small and large ratings

Panel, battery and LED rise together in size steps. One Indian state agency's 2020 tender, as an example, paired 60 Wp and 300 Wh with a 10 W light, and 120 Wp and 700 Wh with 20 W.

How to specify an all in one street light

Panel, battery and LED as one set
State panel Wp, battery Wh and LED watts together. A strong LED on a small battery looks bright, then fades early: the ratio sets the hours of light.
Design sunshine
Ask what the head gives in the dullest monsoon month, not on an average day; Bangladesh usually gets about 80 percent of its rain from June to September.
Heat in the head
Summer air usually peaks at 38 to 41 °C, and a sealed head in sun runs hotter. Ask for the battery's maximum charging and operating temperature and how the LED is cooled.
Two efficacy figures
Ask for lumens per watt of the LED and of the whole luminaire, which counts every loss and is lower. One Indian state tender, as an example, asked at least 150 lm/W (LED) and 100 lm/W (luminaire).
Controller functions
Overcharge and deep discharge cut-offs, temperature-compensated charging, steady output as battery voltage falls, and a reconnect level that stops a barely recharged battery flickering the light.
Pole position and shade
The panel cannot be moved away from a tree, wall or building later, so mark every pole on a daytime walk and keep each head in open sky.

Standards and reports for an all in one head

IEC 60598-1:2024
The current edition of the general luminaire safety standard. Ask which edition the head was tested to.
IEC 61215-1:2021 and IEC 61730-1:2023
Type approval and construction safety for the panel in the head. The 2021 text says a pass does not predict module lifetime.
ANSI/IES LM-79-24 and LM-80-21
Measurement of the complete head, and lumen maintenance of its LED. Ask that the reports name the LED's make and origin.
IEC 60529, IP65
Dust-tight and safe against jets from a 6.3 mm nozzle. One seal guards LED, controller and battery, so ask for the report on the complete head.

What moves the price of an all in one street light

  • The size step: panel, battery and LED rise together, so each step costs more across all three.
  • Battery: a pack rated for higher temperatures, with a better management system, costs more.
  • Controls: dimming and motion sensors add parts, but can let a smaller battery cover the night.
  • Paperwork: test reports for the exact head model carry the cost of the testing.
  • Order and site: number of heads and poles, transport and fitting height.

Lead times and delivery

Time depends on the order. Heads in a common rating may be in local stock; others are imported to order. Custom poles, a sample run and test reports all add time, and monsoon weather can hold up fitting. Roptan confirms the delivery date and any minimum order in the quote.

We deliver heads, poles and fixings to your site anywhere in Bangladesh. The seller fits each head, confirms open sky, sets the controller profile and runs a night test. Ask for a manual in English and Bangla, a name plate on each pole with the service phone and fitting date, the warranty start date and a VAT invoice (Mushak 6.3).

What we check for this order

  • Ratings match the quoteWe check panel Wp, battery Wh and LED watts on a sample head against the quoted set.
  • Heat dataWe ask for the battery's maximum charging temperature and LED cooling data: the head sits in full sun.
  • Reports name the headWe check that safety, photometric and IP reports name the exact head offered, with the LED's origin.
  • Open sky at each poleWe have the seller confirm every pole position before ordering, since a head cannot escape its shade.

Questions buyers ask

Does a motion sensor make the battery last longer?

It can, by letting the head run low until someone comes. The sensor typically reaches about 10 m over less than 180 degrees, so it suits a narrow lane but may miss people at a wide junction. Ask for the dimmed and full outputs in lumens.

Can the battery in an all in one head be replaced?

Ask before you order whether the pack can be changed on the pole or the head must come down. Get its Wh, voltage and chemistry in writing so a replacement can match, and a warranty that defines a failed battery.

Why ask for the LED maker and country of origin?

Output and life depend on the LED and how it is cooled. One Indian state tender, as an example, asked for the LED make, model and country of origin with the LM-79 and LM-80 reports, so the light delivered can be traced to the light tested.

How do I know the head was sized for the monsoon?

Ask what daily sunshine the sizing assumed and how many nights the battery carries on it. A seller who can give only a sunny-day figure has probably sized the head for the dry season, and it will run short on wet nights.

How soon will I hear back about solar street lights?

Within 48 hours of a complete requirement, with a price and a delivery date. A requirement is complete when it has the rating, where it is needed and by when.

Who do I deal with?

With Roptan, when Roptan manages the order: we buy from the verified seller and deliver to you. With the supplier directly, when you post on the requirement board and choose a quote yourself.

Other solar street light products

Each product type has its own page as it is published; until then its card opens the category form.

All solar street lights